DBR201I Remote Control

robyita · Sep 24, 2006

Move (carefully) resistor 10K from position R7044 to position R7043 (next IC7001) and you can use any usually remote control for goldbox

I have a photo to help you finding the resistor and how make the change.

Please note resistor is very small (0603) so do that only if you have good skill in soldering SMT parts

xtrue · Sep 24, 2006

Hi friend....you can post the photo...

robyita · Sep 24, 2006

1st image

2nd image

This seems to work with all the same 16XX family receivers too (not tested by me)

After you move the resistor you CANNOT use your original remote control anymore or you have to move back the resistor at position R7044.
However this is non a very good idea because it is easy to damage the pcb so if you need to use both the remote control you should consider to use a switch with wires connected to a 10k resistor and the resistor pads.

Rocknroll · Sep 24, 2006

robyita said:
how to post an image?

You can't attach an image but you can add an image hosted on another url, like:

Code:

http://picsplace.to/upload.php

You upload your image on that site or some other pic hosting site
then you paste url of that image here in the post using "insert image" icon. View attachment 1833

DBR201I Remote Control

robyita

xtrue

robyita

Rocknroll