Kathrein Tools & Editors

Status
Not open for further replies.

elgeneral

Well Known Member
Messages
7,811
UFS910FlashSuite v2.0

Code:
Hallo
Ich stelle hier mal die neue Version der UFS910FlashSuite vor.
Ab Version 2.0 ist es möglich die Box ohne Serielle Schnittstelle(ComPort) zu Flashen.
Es reicht allein eine Netzwerkverbindung zum UFS910.

Gestartet wird der Flashvorgang in dem der UFS910 mit gedrückter V-Format eingeschaltet wird.

Da das Programm keine Kontrolle über den Flashvorgang hat, sonder der UFS910 das alleine übernimmt, können keine Statusinformationen ausgegeben werden.
Statusinformationen werden dann auf dem UFS910 Display ausgegeben.

Unterstüzt werden Imagefiles im (KCC format).
Das Flashfile muß eine größe von 16.515.072 Bytes haben(Fullflash ohne 1stBoot und Config), eine Kim-datei wird nicht benötigt da die Bootargs separat gesetzt werden können.

Die Bootargs müßen in der Regel nur beim ersten Flashen von E2 gesetzt werden, später reicht es nur eine neues Image(3p1/3p2) zu flashen.

Wie immer wird der der 1stBootloader und dessen Config nicht mitgeflasht, auch nicht bei der Notfallprozedur in der das Org1.06 geflasht wird.
Hier werden aber die Bootargs für die Org 1.06 gleich mitgesetzt.

An dieser Stelle nochmal vielen Dank an SoLaLa von dem ich den Anstoß und viele Infos bekommen habe.


gruß mgck

[/B]
 

elgeneral

Well Known Member
Messages
7,811
SatChannelListEditor V3.6
Kanallisteneditor für UFS821, UFS822, UFS910, UFS922.

Code:
Version 3.6

Neue Features:



alle SPIDCache Werte nun pro Kanal einstellbar (z.B. Videotype, Audiokanal, AC3Delay, PCMDelay etc.) (Enigma2)


Bugs fixed:



Namespace eines Transponder wird nicht upgedated, wenn man den Satelliten, die Frequenz oder die ONID eines Transponders ändert (Enigma2)

Man kann einen Kanal aus der Gesamtliste nur auf einen Favoriten "droppen", aber nicht auf einen Kanal eines Favoriten

Exception beim Starten unter Mono, wenn ein Drucker eingerichtet ist

Ftp-Download unter Mono funktioniert bei Enigma2 nicht

Beim Löschen eines Favoriten unter Mono wird der TreeNode nicht aus dem TreeControl entfernt


Hinweise



Unter Windows muss Microsoft .NET Framework 2.0 oder höher installiert sein

Unter Linux muss das Mono Framework installiert sein (getestet mit Mono 2.0.1 , evtl. müssen WinForms libraries nachinstalliert werden mit "sudo apt-get install libmono-winforms*") [/B]
 

elgeneral

Well Known Member
Messages
7,811
UFS910FlashSuite V2.2

Code:
Neu in V2.2 

Einspielen und entfernen von miniUboot

Achtung!
Da die Netzwerkeinstellungen durch die Zuteilung des DHCP servers überschrieben würden,
setzt die FlashSuite die Args (ipaddr,netmask usw..) anhand des gewählten Profil des Reiters >Bootargs< 


Gracias [COLOR="#0000ff"]mgck
[/COLOR][/B]
bcbcbc.gif
 

elgeneral

Well Known Member
Messages
7,811
UFS910FlashSuite V2.3

Code:
Neuerungen:
Statusmeldungen ala Countdown im UFS910 Display während des Flashvorganges (THX SoLaLa)
Dateiendung ist egal *img,*bin usw..
 

kiliantv

Super VIP
Messages
7,057
SatChannelListEditor V3.7

Kanallisteneditor für UFS821, UFS822, UFS910, UFS922.

Version 3.7

Neue Features:

* Keyboard-Shortcuts für Öffnen, Speichern, Importieren, Suchen, Upload und Download


Bugs fixed:

* Wenn ein Sender zu einem Favoriten hinzugefügt wird, erscheinen manchmal komische Zeichen (DVB Separator Chars) im Namen des neuen TreeNodes (Enigma2)
* Wenn keine Kanalliste geöffnet ist und man klickt auf "speichern", dann tritt eine Exception auf
* Wenn eine Kanalliste von Enigma2 ins UFS910-XML Format konvertiert wird, dann haben nach dem Einspielen auf den Receiver viele Satelliten keinen Namen mehr
* Grösse des Fensters für die Einstellungen reduziert, damit es auch auf Netbooks noch angezeigt werden kann


Hinweise

* Unter Windows muss Microsoft .NET Framework 2.0 oder höher installiert sein
* Unter Linux muss das Mono Framework installiert sein (getestet mit Mono 2.0.1 , evtl. müssen WinForms libraries nachinstalliert werden mit "sudo apt-get install libmono-winforms*")
 

juli13

Staff member
Administrator
Messages
10,194
Channel List Editor for UFS821, UFS822, UFS910, UFS922.

Version 3.8

New features:

Converting UFS910 channel lists in XML format into the format UFS821/UFS822

Bugs fixed:
In mode UFS821/UFS822 produced two lists can not be read by the DVR Manager
incorrect calculation of the namespace in the transponder editor Enigma2

Notes
On Windows, Microsoft. NET Framework 2.0 or higher to be installed
Be installed under Linux, the Mono Framework (tested with Mono 2.0.1, and possibly WinForms must be installed from libraries with "sudo apt-get install libmono-winforms *")
 

juli13

Staff member
Administrator
Messages
10,194
Channel List Editor for UFS821, UFS822, UFS910, UFS922.

Version 3.9

New features:
New option to upload Satellites.xml during upload with the receivers (Enigma2)
The satellite is now editor instead of the "flags" parameter 4 check boxes for each value of the "flags" parameter set (Enigma2)

Bugs fixed:
The attributes "NoSDT" and "NoPMT" are not in the overall list of TV and radio channels displayed (Enigma2)
Transponder without lamedb channels are written to, even though they really only need to Satellites.xml (Enigma2)
Transponder from the Satellites.xml that are not in the lamedb are not displayed in the transponder list (Enigma2)

Notes
On Windows, Microsoft. NET Framework 2.0 or higher to be installed
Be installed under Linux, the Mono Framework (tested with Mono 2.0.1, and possibly WinForms must be installed from libraries with "sudo apt-get install libmono-winforms *")
 

tani1

Staff member
Super Moderator
Messages
17,767
Instalator E2 EXT3 v.0,41.06 For Kathi E2

1. If You want to use this software in Linux, please install below packages:

-> dotnet20
-> ie6setup.exe
-> ie6sites.dat
-> InstMsiA.exe
-> mono-2.0.1-gtksharp-2.10.4-win32-1.exe
-> samyak-fonts-1.2.0.tar.gz
-> setuppad.exe
-> vbs56men.exe
-> vc6redistsetup_enu.exe
-> WindowsXP-Windows2000-Script56-KB917344-x86-enu.exe
-> wine_gecko-0.9.1.cab
 

juli13

Staff member
Administrator
Messages
10,194
Instalator E2 EXT3 v.0,41.07 For Kathi E2
Code:
1. If You want to use this software in Linux, please install below packages:

-> dotnet20
-> ie6setup.exe
-> ie6sites.dat
-> InstMsiA.exe
-> mono-2.0.1-gtksharp-2.10.4-win32-1.exe
-> samyak-fonts-1.2.0.tar.gz
-> setuppad.exe
-> vbs56men.exe
-> vc6redistsetup_enu.exe
-> WindowsXP-Windows2000-Script56-KB917344-x86-enu.exe
-> wine_gecko-0.9.1.cab
 

tani1

Staff member
Super Moderator
Messages
17,767
Instalator E2 for Kathrein - EXT3&FAT v0.5a
1. If You want to use this software in Linux, please install below packages:
dotnet20
ie6setup.exe
ie6sites.dat
InstMsiA.exe
mono-2.0.1-gtksharp-2.10.4-win32-1.exe
samyak-fonts-1.2.0.tar.gz
setuppad.exe
vbs56men.exe
vc6redistsetup_enu.exe
WindowsXP-Windows2000-Script56-KB917344-x86-enu.exe
wine_gecko-0.9.1.cab
 

marce

VIP
Messages
7,115
SatChannelListEditor_V3.9.1


Code:
Kanallisteneditor für UFS821, UFS822, UFS910, UFS922, TF7700

update:25.01.2010 
V3.9.1. fixes a bug in the mode "UFS910" when you import channels from a second channel list in the current channel list. It may have been the channels allocated to an incorrect satellite.
To install it, replace the exe. I.e. The V3.9 and then install the. exe v3.9.1 copy of the installation directory and the original. exe to overwrite.
 

juli13

Staff member
Administrator
Messages
10,194
Code:
[B]If You want to use this software in Linux, please install below packages:[/B]
dotnet20
ie6setup.exe
ie6sites.dat
InstMsiA.exe
mono-2.0.1-gtksharp-2.10.4-win32-1.exe
samyak-fonts-1.2.0.tar.gz
setuppad.exe
vbs56men.exe
vc6redistsetup_enu.exe
WindowsXP-Windows2000-Script56-KB917344-x86-enu.exe
wine_gecko-0.9.1.cab
 

tani1

Staff member
Super Moderator
Messages
17,767
Code:
1. Installation SoftUSB2 and E2 - in fact, this option should be used only when installing softusb2 and E2 is the first time, or pen-and changed, or damaged we Softusb2, which reveals not display bootmenu. The function of the pen erases all existing partitions, assumes a new, reformats it, installs softusb2, installs and configures the main e2 bootmenu.

2. Installing new version of the E2 (update) - use it when you want to record a new version of the E2 to the already installed in step 1 and existing standard as a 2 point bootmenu. It works only on the installation Świerże E2 and change the entry bootmenu. No other files on the pen are not deleted.

3. Doinstalowanie new firmware E2/neutrino/inne:
- Unpack the downloaded zip file with the soft / zip to a file tar.gz
- Select the advanced options
- Then unpacking / installation of a new distribution of E2
- When asked "Do you unpack the distribution of E2 to the directory?" persons using the EXT3 may respond, depending on preference. People who use the FAT file system this question does not appear.
- When asked "Do you create an image Softusb2?" answer YES
- Choose soft we want. Eg Neutrino_tdt-2001_PKT-178.tar.gz
- We give the name of the created image. Such as neutrino
- Size of the created image can be left to 256MB.
- When you create image entering to the "Manage BootMenu"
- We press download
- Zaznaczamynastępną empty position bootitem
- In the name box type the text you want to appear on the display. Such as neutrino
- Field type always choose e2 for E1/E2/Neutrino/VDR
- Select type field softusb2
- Press the question mark on the right side of the field parameters
- Mark the file you created earlier neutrino.uImage
- Field of parameters, for example, should look for example like this: .. / images / neutrino
- We press Save
- We press download to see if bootmenu been changed
- We close the program and look forward to the new firmware doinstalowanego

4. Doinstalowanego firmware update earlier E2/neutrino/inne:
- Unpack the downloaded zip file with the soft / zip to a file tar.gz
- Select the advanced options
- Then unpacking / installation of a new distribution of E2
- When asked "Do you unpack the distribution of E2 to the directory?" persons using the EXT3 may respond, depending on preference. People who use the FAT file system this question does not appear.
- When asked "Do you create an image Softusb2?" answer YES
- Choose soft we want. Eg Neutrino_tdt-2001_PKT-178.tar.gz
- Box enter the same image, which was used previously. This will overwrite the old files with new ones.
- Size of the created image can be left to 256MB.

5. Removing unnecessary entries from bootmenu:
- Run the installer E2
- Enter the advanced options
- Then to manage bootmenu
- Press download
- If you have questions about the type of partition, answer truthfully ;-)
- Is characterized by the bootitem you want to delete. Of course you can uncheck any, even the middle. The rest will be poprzesuwana during a write operation
- Press Save and then download the purposes of checking whether our settings are correctly inscribed

6. Improved network configuration:
- Run with the tuner Drivers in flash
- Run the installer E2
- Enter the advanced options
- Then telnet
- We press the button "Configure network for E2
- We reaffirm that the tuner is running with the Drivers in flash
- We reaffirm that the tuner is in standby mode
- When asked "Do you use EXT3?" answer YES if softusb2 is installed on your system EXT3, or NO if the FAT
- We provide a correct gateway address
- Changing the mask, if necessary
- Waiting until the completion of the work, which show the information:
-> Uboot (2) network configured
IP address: 192.168.1.7
Netmask: 255.255.255.0
Gateway: 192.168.1.1
Server: 192.168.1.1
/ tmp/configurator/softusb2 #

The CDN as will demand for knowledge and willingness to
 

juli13

Staff member
Administrator
Messages
10,194
Instalator E2 4 Kathrein_Octagon v-0,8

Code:
1. Installation SoftUSB2 and E2 - in fact, this option should be used only when installing softusb2 and E2 is the first time, or pen-and changed, or damaged we Softusb2, which reveals not display bootmenu. The function of the pen erases all existing partitions, assumes a new, reformats it, installs softusb2, installs and configures the main e2 bootmenu.

2. Installing new version of the E2 (update) - use it when you want to record a new version of the E2 to the already installed in step 1 and existing standard as a 2 point bootmenu. It works only on the installation Świerże E2 and change the entry bootmenu. No other files on the pen are not deleted.

3. Doinstalowanie new firmware E2/neutrino/inne:
- Unpack the downloaded zip file with the soft / zip to a file tar.gz
- Select the advanced options
- Then unpacking / installation of a new distribution of E2
- When asked "Do you unpack the distribution of E2 to the directory?" persons using the EXT3 may respond, depending on preference. People who use the FAT file system this question does not appear.
- When asked "Do you create an image Softusb2?" answer YES
- Choose soft we want. Eg Neutrino_tdt-2001_PKT-178.tar.gz
- We give the name of the created image. Such as neutrino
- Size of the created image can be left to 256MB.
- When you create image entering to the "Manage BootMenu"
- We press download
- Zaznaczamynastępną empty position bootitem
- In the name box type the text you want to appear on the display. Such as neutrino
- Field type always choose e2 for E1/E2/Neutrino/VDR
- Select type field softusb2
- Press the question mark on the right side of the field parameters
- Mark the file you created earlier neutrino.uImage
- Field of parameters, for example, should look for example like this: .. / images / neutrino
- We press Save
- We press download to see if bootmenu been changed
- We close the program and look forward to the new firmware doinstalowanego

4. Doinstalowanego firmware update earlier E2/neutrino/inne:
- Unpack the downloaded zip file with the soft / zip to a file tar.gz
- Select the advanced options
- Then unpacking / installation of a new distribution of E2
- When asked "Do you unpack the distribution of E2 to the directory?" persons using the EXT3 may respond, depending on preference. People who use the FAT file system this question does not appear.
- When asked "Do you create an image Softusb2?" answer YES
- Choose soft we want. Eg Neutrino_tdt-2001_PKT-178.tar.gz
- Box enter the same image, which was used previously. This will overwrite the old files with new ones.
- Size of the created image can be left to 256MB.

5. Removing unnecessary entries from bootmenu:
- Run the installer E2
- Enter the advanced options
- Then to manage bootmenu
- Press download
- If you have questions about the type of partition, answer truthfully ;-)
- Is characterized by the bootitem you want to delete. Of course you can uncheck any, even the middle. The rest will be poprzesuwana during a write operation
- Press Save and then download the purposes of checking whether our settings are correctly inscribed

6. Improved network configuration:
- Run with the tuner Drivers in flash
- Run the installer E2
- Enter the advanced options
- Then telnet
- We press the button "Configure network for E2
- We reaffirm that the tuner is running with the Drivers in flash
- We reaffirm that the tuner is in standby mode
- When asked "Do you use EXT3?" answer YES if softusb2 is installed on your system EXT3, or NO if the FAT
- We provide a correct gateway address
- Changing the mask, if necessary
- Waiting until the completion of the work, which show the information:
 

juli13

Staff member
Administrator
Messages
10,194
21.03.2010

Mini-Instalator 4 Kathrein_Octagon

Code:
1. If You want to use this software in Linux, please install below packages:
dotnet20
ie6setup.exe
ie6sites.dat
InstMsiA.exe
mono-2.0.1-gtksharp-2.10.4-win32-1.exe
samyak-fonts-1.2.0.tar.gz
setuppad.exe
vbs56men.exe
vc6redistsetup_enu.exe
WindowsXP-Windows2000-Script56-KB917344-x86-enu.exe
wine_gecko-0.9.1.cab
 

juli13

Staff member
Administrator
Messages
10,194
09.06.2010

UFS-910_flash image updater 0.6

Flash image updater is a tool which helps general users in process of updating the Neutrino in the flash.

The main function does the following:

- backup of the current settings
- writes new version of image to flash
- restore settings.
 
Status
Not open for further replies.
Top