UFS910 TitanNit Edition

Status
Not open for further replies.

baha2

Super VIP
Messages
6,530
UFS910 TitanNit Edition1.20

Code:
[B]Changelog 1.20[/B]

    fix scart HDMI red screen
    fix wdr hd regional
    fix oscam cardreaderconfig
    fix unicam HD plus
    add Menü Systemeinstellungen HDplus (Überspringe Private CA descriptor=ja)
    fix epg
    fix Tunertransponder Liste
    fix Filebrowser
    fix Spulfunktion
    fix ts player
    fix transponder id 64bit
    fix Softcam Reboot
    fix timerkonflikt
    fix callmon (mute Problem, zu überwachende Rufnummer, Unterstützung vom neuen Fritzbox Labor Adressbuch)
    fix IP-Kammera (auf 2 Kammeras erweitert)
    fix LCDSamsung (spf105 und spf107 hinzugefügt)
    fix Mediacenter
    Fix Tithek
    update Wetterplugin
    update Kanallist Sat
    add Kanallist Kabel
    add gbox 806 IPK Download
    add Wave Support und Streaminfo
    add wlan 5370
    add tithek picons


    Changeliste lang:

    [titan] fix lang
    [titan] update tobayer01 skins
    [titan] reset mini tv after red in player
    [titan] fix channellist btn
    [titan] fix titel
    [lcdpearl] better play skin
    add oscam swap v13 Intern_Lower Slot
    [lcdpearl] fix
    [lcdsamsung] new weather pics
    fix Slotinfo
    fix Slot
    [ufs910] testfix ---> set camrouting off
    fix skin
    [titan] fix zap in gmultiepg
    checkpmtalways=1 atemio510/7600 wdr hd test
    [titan] filemanager remove create foilder to menu
    [titan] add menu to filelistmanager
    add mv option to filemanager.h
    [titan] ad av settings to play menu
    [titan] testfix dynm. program change
    fix start.sh
    [ufs910] testfix ---> fix highSR in tuner driver
    [ufs910] testfix ---> add camrouting and highSR in tuner driver
    [titan] fix rectimer conflict detect
    [titan] update epg logic
    test checkpmtalways=0 wdr hd Atemio510/7000
    [titan] implement little garbage collection (see oldentry)
    add wlan 5370 to release
    [titan] reset lasepg status on resetepg
    [titan] optimize streaminfo skin
    fix oscam 6201 Intern_Upper v13
    fix v13 Intern_Upper oscam 7209
    add settings unitymedia Kabel thx danzi19
    [titan] fix typo
    [titan] fix epgscan
    add picons white70 thx matze70
    [titan] fix rectimer konflikt test
    [titan] filemanager add create folder
    [titan] fix transponderid
    fix scart
    [titan] fix ca ioctl
    [titan] skip emu.sh stop on gui restart
    [titan] fix resttime calc
    [titan] add getepgnext
    [titan] update epg only if version greater and endtime >= akttime
    [titan] fix changetransponderid
    [titan] fix mediadb
    [titan] textfix double epg
    [titan] fix comp warn
    [titan] fix error reboot in weather/stock
    [titan] testfix weather
    [titan] set max TS speed (FF/FR) to 64
    [titan] fix memleaks
    [titan] reset source routing after remove module
    [titan] add timer konflikt check
    [titan] update mc vp fullcover skin add plot, title, cover
    [titan] fix sorting after menu
    [titan] add /var/etc/.scart if using pal/576i on gui
    [all] change scart detection only on firstboot or if exist /var/etc/.scart
    [callmonitor] little fix
    [ipCam] activate 2. Cam
    [callmon/ipcam] save config
    [titan] move weather file to /var/swap/player
    {titan] update streaminfo skin
    [titan] add adjust to skin.xml
    [titan] fix unicam satHD …
    [titan] wetter update remove yellow from screen save with ok
    [titan] update wetter plugin skin
    [titan] show resolution on vfd
    [titan] fix save videosettings after confirm
    [titan] start timer/ca thread first
    [titan] fix ci input
    [titan] add testfix for epg with same starttime
    [titan] fix internal Player -> fr speed
    [titan] fix internal Player -> ff speed
    [titan] at7500/atemio7600 fix rcresolution
    [titan] move hbbtv/browserfav to /var/swap/player
    [titan] add streaminfo to ipkg database
    add streaminfo to release
    [titan] defaultskin optimize channelbynr fontsize
    [titan] mc update in/out screens
    fix scart remove work
    {callmonitor] extensions for 7390 labor
    [titan] save av settings after change
    disable halt on error on ufs910
    [callmonitor] add new 7390 laborfirmware
    [titan] add menu to MP (rcred)
    [titan] check HDMI only on first start
    [titan] update all 0815 skins
    [titan] update default skin, improve volume bar
    [titan] change error log to /var/swap
    [titan] restrict showing files to file extension (filemanager)
    [titan] fix softcam reboot
    fix Titan Settings matze70
    fix Titan Settings new design matze70
    add Titan Picons Transparent THX matze70
    add Titan Picons Spiegel THX matze70
    [titan] fix transponderid (unsigned long to uint64_t)
    [titan] update 0815 swapskins, showlastpos, see also r18389
    [titan] fix epg write
    [titan] fix html timer record with + in channelname
    [titan] update tobayer01 skins
    [titan] update ufs912 skins
    [titan] del fastzap from standard settings
    [titan] write epg periodic only if epgsave = allways
    [titan] add playsplitfiles for playing splitted files at once (not tested)
    [titan] add record name format to skin
    [titan] add record name format adjust
    update ipkg stuff
    disable settings upgrade on upgrade
    [ipük] change settings reboot
    [titan] write epg all 2h periodic to medium
    [titan] change transponderid unsigned long to uint64_t
    [titan] change transponderid from unsigned long to uint64_t
    [titan] fix hang on thread textbox and other thread boxes if box is show …
    [titan] changing unsigned long long int to unsigned long long (it's the …
    [callmonitor] fix number1/2
    [lcdsamsung] fix last change
    [lcdsamsung] update weather in standby / additional frames
    [titan] shrink filelist size in updatescreen
    fix skin/default/skin.xml
    fix po
    [titan] update default skin
    [titan] add recsync to adjust screen
    [titan] update tobayer01 skins, fix atemio panel
    [titan] update default skin, minor format issues
    [titan] fix atemio panel, missing icon & not existing menu
    [titan] tithek fix nbatv icon
    [titan] mc save playlist after create
    [titan] change playlistpath/file to /var/swap/player
    [titan] mc use rcexit as rcstop on playback
    [titan] on titan end close all devices
    [titan] fix memleak
    [titan] tithek fix build
    [titan] fix count
    [titan] fix menü change
    [titan] some cosmetic fixes tithek
    [titan] fix memleak, add if NULL, add return code
    [titan] reload history on green
    [tithek] fix icon name typo
    [titan] update tobayer01 skins
    fix showlastpos
    [titan] add last position config entry to all 0815 skins
    [tithek] fix ZDF icon names
    update dtsdownmix fw use beeg/dtsdownmix ok
    [titan] update filemanager
    [tithek] update ZDF Icons
    [titan] fix filemanager
    [tithek] fix category icon names
    [titan] deactivate checkdev workaround (fixed in e2_proc module)
    update use old firmewars beeg + dtsdownmix ok
    [titan] change inputhist height (skin.xml)
    [titan] change user agent
    [t5itan] mc ap enable wav
    [all] fix externel fwloading from swap mtd
    [tithek] add ZDF Category Icons
    [titan] fix http redirect
    update tithek
    [titan] change epg opt. from channel to transponder
    [titan] aktivate cam testfix with error fix
    [titan] fix information menu on 0815 skins
    [titan] deaktivate dvr dmx filter on auto channel change
    [titan] optimize epg read
    [titan] add frontent type flag to transponderid
    [tithek] update MyVideo? icons
    [tithek] update MyVideo? favorite Icons
    [tithek] update youtube category icons
    [tithek] add MyVideo? Serien category Icons
    [tithek] add MyVideo? Top100 category icons
    add Kabeltransponder undefiniert
    [tithek] add Myvideo main category icons
    update oscam 7209
    fix po unicable
    [titan] add unicable assi settings
    [titan] add uncable button to lnb screen (skin.xml)
    [titan] add unicable assistent
    make release v1.19
    [titan] change poweroff record logic on poweroff
    [titan] fix compiler warn
    [titan] increase timeshift dmx buffer to 5MB
    [titan] lcd skin - changed title & prev picture
    [titan] fix timeshift control

    ****ufs910
    camrouting per Parameter ausschalten

    ****ufs910 aber nicht getestet
    Parameter Highsr sollte wieder Wirkung zeigen
    Parameter useUnknown beim Tunertreiber wieder möglich

    Danke an alle die bei der Entwicklung und beim Testen der Image helfen.

    Euer AAF Team
 

baha2

Super VIP
Messages
6,530
UFS 910 TitanNit 1.21 als IRD

AAF_M19158_g4543_ufs910_update_titan_v1-21_p209_P191-FFM_M3_FULL_nodebug.img

Viele Bugs wurden gefixt in der neuen Version.
Das einrichten der Cardreader (intern,extern) wurde verbessert.
Es werden bald Videos zur Verfügung stehen, um euch das Einrichten der TitanNit Box zu erleichtern.
Für die Mediathek existieren bereits Videos als Vorschau was möglich wäre bzw. wie die Box optimal eingerichtet wird.
Wenn die entsprechenden Erweiterungen installiert sind,
kann der Umfang der Mediafunktionen im Mediacenter erweitert werden.
Atemio hat es mit dem Betriebssystem Titan geschafft,Linux als Firmware etwas aus dem Freakbereich herauszuholen und Mainstream tauglich zu machen. Denn mit der neuen Firmware werden sich auch Nutzer ohne Linux-Erfahrungen sehr schnell zurecht finden.
An diesem Wochenende wird die TitanNit Version 1.21 freigegeben, mit einigen neuen Multimedia features.
Wer eine TitanNit Version (1.20) bereits im Flash hat, kann sich als Vorschau die künftige 1.21 TitanNit Version schon installieren.

Changelog 1.21

Hier können wir ja mal alles zusammentragen

- Mediacenter neue Features
- Cardreader configurator im Menü
- fix ORF Module
- Fix "Eurosport 2 Deutschland" und "MTV live HD" (ACL-Problem)
- fix nas share as recordmount
- disable system backup on at510/7600
- add Radiostream
- add gmediarender eplayer3
- add newsletter
- mediacenter audioplayer add cover support
- mediacenter videoplayer add manuel imdb search
- after record create cover and backdrop dumps
- add icons to playinfobar
- mediadb add multible backdrop support
- Mediacenter/ RecordPlayer add Red Menu (imdb/tmdb/imdbapi/mediadbedit/mediadbscan/delete file)
 

kargo.25

Super VIP
Messages
9,725
UFS910_TitanNit_Edition_1.22

Changelog 1.22

Code:
- Mediacenter neue Features
- Cardreader configurator im Menü
- fix ORF Module
- Fix "Eurosport 2 Deutschland" und "MTV live HD" (ACL-Problem)
- fix nas share as recordmount
- disable system backup on at510/7600
- add Radiostream
- add gmediarender eplayer3
- add newsletter
- mediacenter audioplayer add cover support
- mediacenter videoplayer add manuel imdb search
- after record create cover and backdrop dumps
- add icons to playinfobar
- mediadb add multible backdrop support
- Mediacenter/ RecordPlayer add Red Menu (imdb/tmdb/imdbapi/mediadbedit/mediadbscan/delete file)
 

juli13

Staff member
Administrator
Messages
10,194
UFS910_TitanNit_Edition_1.23

Code:
[B]Changelog Version 1.23:[/B]

- kernel update auf stm24 p211
- tmdb/imdb/imdbapi fixed
- Tithek youtube fix
- add mhw und mhw2
- one step opentv
- one step dvb-t
- timer ausschaltmodus im web
- Einstellung um in der Infobar bei jeder Sendung anzuzeigen
- fix Newsletter on and off
- fix Blindsscan
- fix gmediarender pic view
- fix nas share as recordmount
- save last videomode in mc
- fix dlna autostart
- fix eth0 = off
- fix manual imdb scan
- add info button to miniplayer
- add news category to tithek mainmenu
- add temp sort to miniplayer
- fix myvideo
- add short epg / press 0 in channellist
- fix mediadb
- fix webif cable
- fix --> set cursor to next cammera
- update all skins
- wlan optimize
- fix patches for lcd support
- update Settings and Picons
- fix bootlogo
- add startscript before tv
- fix driver patch
- change adjust skin
- fix blinking clock
- fix formula volume autochange
- fix rectimer afterevent
- optimize tithek
- fix mute on channel switch

DOWNLOAD
 

juli13

Staff member
Administrator
Messages
10,194
UFS 910 TitanNit Version 1.24

Code:
[B]Changelog:[/B]



AAF_M19878_g4658_ufs910_update_titan_v1-24_p211_P191-FFM_M3_FULL_nodebug.img

Weitere Infos folgen..

- neue Kanallisten
- Mediathek weiter verbessert
- EPG verbessert
- formatieren ext3
- Festplattenerkennung verbessert ( Filecheck)
- Suchlauf Settings verbessert
- marker für Aufnahmen hinzugefügt
- und vieles mehr, siehe darunter



- add resettv to begin of hbbtv start
- add facebook, gmediarender, callmonitor,perl/samsung lcd, zapback picture
- add atemio preview videos
- fix transponder
- change wlan driver
- add slowmotion
- fix picons
- fix addconfig vol
- fix jfs
- fix weather
- add Kabel-D swap Picons
- update almost all skins: fix choiceminitv, add usecec & changename …
- fix play marker
- tithek add cache playback (10mb/180s)
- update Picons white70 THX matze70
- update unitymedia cable Settings THX caliban
- add picon sat1 gold transparent
- add picons transparent Syfy HD and 13th HD
- update sat default Settings
- tithek add new hoster
- use ext3 as default hdd format
- show different channel name in scan list
- add cec support / only titan not the driver
- fix timer
- add DBV-T Support THX gost
- fix blindscan settings
- update channel uljanow sat
- update channel sat default
- update matze70 default Settings
- update Settings matze70 new Design
- fix miniplayer
- update almost all skins: add crosscontrol, emucontrol & minitv
- update titan_grey swapskin (old default)
- fix mute atevio7000
- default skin, remove hidden=yes; crosscontrol, emucontrol & minitv
- update default skin, just some re-formatting
- at7000 little led fix
- update almost all skins, at7000 led brightness
- fix ... stop if not used
- at7000 at led brightness final
- update infobar enable vol+/- on rcleft/rcright enable ch+/- on …
- new weather icons
- add tiMote
- update all 0815 skins
- update tobayer01 skins, small fix in epgsearch, set fontcol2
- write newsletter config entry direct
- add newsletter timeout and save only if no timeout
- update cool & coolMiniTV swapskins
- next fix ac3 increase
- fix youtube
- fix rectimer afterevent
- fix webif for atevio700/7000
- update vpn
- [vpn] update tun.ko to p211
- update newsletter start/stop
- fix blinking clock
 

baha2

Super VIP
Messages
6,530
UFS910 TitanNit 1.25 im Online Update Testversion

Code:
Bitte vorher eure Settings sichern und zurückspielen

oder eine IPK Settingsversion installieren aus unseren Erweiterungen.

Backupfunktion deaktiviert, da zu viele Fehler mit übernommen wurden.

Es wurde auf eine automatische Backupfunktion umgestellt, bei den andern Boxen.

Für die UFS910 wird immer noch nach eine Lösung gesucht,

da es hier kein mnt gibt zum sichern und eine Sicherung auf USB swap oft fehl schlug

beim Restore.

Thema USB Stickerkennung, davon sollten wir weg gehen in Zukunft.
USB Sticks sind zu fehlerhaft in der Erkennung zu unterschiedlich
und oft wird sich das Filesystem zerstört.

Es gibt zum Sichern der Settings eine neue Version vom Satchannellisteditor,
bitte diese dann benutzen.

Im OnlineUpdate befinden sich bald mehrere Testversionen vom 1.25 Image,

hier wird noch einiges gefixt damit wir eine überarbeitete 1.25 Version als IRD für euch bereitstellen können.

Kurze Info zum Entwicklungsstand der 1.25:

- aufnahmen mit mutituner und zappen gefixed
- ci modul erkennung verbessert (at7600, at510)
- automatisches backupsystem
- cardreader (verpixelungen) gefixed
- cardreader bekanntes problem, aufnahmen ruckeln
- bouquett wechsel in epg << ****
- automatischer subtitle start (in settings einstellbar)
- erste testversion permanent timeshift
- wlan einstellungen optimiert
- Multimediafunktionen weiter verbessert

Viel Spaß beim Testen.
 

baha2

Super VIP
Messages
6,530
UFS 910 TitanNit 1.25

Code:
    TitanNit Wechselthread für die Kathrein UFS-910
    -----------------------------------------------

    Um euch die Installation von TitanNit so leicht wie möglich zu machen werde ich hier mal die aus meiner Sicht einfachsten Methoden für jeden Fall darstellen. Da ihr eure Kathi ja schon lange kennt wisst ihr ja auch, dass es sich um eine zickige Box handelt! Und auch, dass viele Wege nach Rom führen. Also dies hier sind nur Empfehlungen. Bei Notfällen könnt ihr euch auch an meinen Notfallthread halten! Leider reagieren nicht alle Kathis immer gleich. Bei der einen geht etwas, was bei der anderen nicht geht. Wenn immer man an die Kathi geht und bastelt sollte man ein Nullmodemkabel in Griffweite haben falls was schiefgeht!

    So, nun kann es losgehen!
    Ich werde hier die verschiedenen Ausgangsszenarien darstellen.
    TitanNit für die Kathi UFS-910 kann grundsätzlich wie ein normales E2-Image installiert werden!
    Das heißt aber auch, dass es nicht wie ein originales Kathreinimage geflasht werden kann also mit Stick und drücken der Menü-Taste!

    Auf der Box ist schon Miniuboot oder Maxiuboot installiert
    Das ist der einfachste Fall. Wie kann ich das nun feststellen?
    Alle mir bekannten anderen Images außer den original Kathrein und den original Kathrein Mods benötigen im Flash MiniUboot oder MaxiUboot. Trotzdem kann man das wie folgt prüfen:
    Kathi hinten am Schalter ausschalten. Dann alle USB-Geräte abmachen. Jetzt die Fernbedienung nehmen und den Finger schon mal auf die REC-Taste legen. Dann die Kathi anschalten und die REC-Taste drücken. Jetzt sollte wenn der Schriftzug Kathrein UFS-910 verschwindet "miniFlash search" kommen im Display. Dann ist alles ok und ihr könnt das Image flashen.
    Wenn ihr schon ein E2-Image oder Neutrino-Image im Flash habt, dann ist auf alle Fälle ein Miniuboot oder Maxiuboot schon installiert denn sonst würde das Image nicht starten. Jetzt gibt es viele Möglichkeiten der Installation.
    Flashen mit MiniUboot oder MaxiUboot
    Bei dieser Methode wird keine Verbindung zur Kathi benötigt und sie ist sicher die einfachste und auch schnellste Methode! Aber Achtung!! Nicht bei jeder Konstellation funktioniert das zu 100 Prozent zuverlässig. Habe ganz vereinzelt mal den Fall gehabt, dass das Image danach nicht bootet. Von der Kathrein 2.02 nach Erstinstallation von MiniUboot ging das aber immer!
    Schön, dann einfach einen USB-Stick nehmen und das TitanNit - Image in miniFLASH.img umbenennen (genaue Schreibweise beachten!!!) und in das Stammverzeichis des Sticks spielen. Nun den Stick vorne in die USB-Buchse stecken und alle anderen USB-Geräte abmachen. Nun wieder den Schalter aus und an und die REC-Taste auf der Fernbedienung drücken. Jetzt sollte das Image gefunden werden und der Flashvorgang beginnt.
    Installation aus dem bsiherigen Image heraus über das AAF-Panel
    Dazu dann in das Verzeichnis /var/swap/images das Image per FTP mit der md5 Datei übertragen oder auch direkt auf den Swapstick und mit dem AAF-Panel installieren ins Flash und fertig.
    Installation mit dem AAF Recovery Tool (ART)
    Dieses Tool ist das schweizer Messer für die Kathi. Damit bekommt man jede Kathi wieder in den Griff, kann Mini und MaxiUboot installieren, Defaults wieder setzen und vor allem auch Images flashen. Hierzu braucht ihr ein Nullmodemkabel und ein Crossoverkabel zur Kathi. Es geht auch ein Patchkabel wenn ihr einen Router dazwischen habt.
    Ganz einfach dann: Reiter Image flashen auswählen und wie ein normales E2-Image flashen und fertig. Achtung: Falls ihr keine Netzwerkverbindung zur Kathi bekommt liegt es meistens an der Firewall! Diese dann kurzzeitig deaktivieren! Es muss eine feste IP für den Lan-Anschluss am PC / Notebook eingestellt werden.
    Installation mit MPI (Multipart Installer)
    Hiermit kann ebenso geflasht werden. Voraussetzung ist eine Netzwerkverbindung zur Kathi.
    Auf der Box ist noch kein Miniuboot oder Maxiuboot installiert
    Das ist meistens der Fall wenn ihr noch das original Kathrein-Image oder auch ein Mod-Image im Flash habt. Meistens nutzen die User dann BA um Images vom Stick zu starten.Ok, dann erst einmal Miniuboot oder Maxiuboot installieren sonst geht nichts. Hier empfehle ich euch das AAF Recovery Tool aus der Database zu benutzen. Ihr braucht ein Nullmodemkabel und eine Netzverbindung zur Kathi. Als Admin starten und eine feste IP vergeben. Eventuell Firewall mal ausmachen. Ich empfehle euch Miniuboot weil dadurch nicht der originale Bootloader ersetzt wird. Maxiuboot überschreibt den originalen Bootloader der Kathi. Beide sind aber in der Funktion gleich. Also: Miniuboot reicht und ist sicherer! Man kann Miniuboot auf folgende Art und Weise installieren:
    Mit AAF Recovery Tool
    Benötigt werden ein Nullmodemkabel und eine Netzwerkverbindung; eventuell FTP-Server installieren mit KCC!
    Mit MPI
    Benötigt wird eine Netzwerkverbindung; eventuell FTP-Server installieren mit KCC !
    Mit dem Terminal
    Benötigt wird nur ein Nullmodemkabel
    So, wenn MiniUboot erfolgreich installiert wurde dann wie oben beschrieben das Image flashen!

    Noch ein paar Hinweise!
    Die Settings von E2 könnt ihr nicht verwenden. Das muss einmal neu eingerichtet werden. Mit dem SatChannellistEditor könnt ihr euch die Bouquets sichern und auf Titan konvertieren und einspielen!
    Ich empfehle bei der Benutzung von Erweiterungen einen SwapStick. Könnt ihr mit CreateMini schnell erstellen! Dann kann man natürlich auch noch andere Images als USB benutzen wenn man will!
    Folgende Testszenarien erfolgreich getestet:

    Kathrein 2.02 > MiniUboot mit ART>miniFLASH.img>Ging super!
    E2 Don't Cry>AAF Panel>ok
    E2 Don't Cry>miniFLASH.img>ok
    Egal was mit ART>Image flashen>ok

    Viel Erfolg!


    Wir wünschen euch allen viel Spaß mit TitanNit und eurer Kathi UFS-910!!
    Das beste Image was je auf der Kathi gelaufen ist!




    -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

    Changelog 1.25

    Ab sofort steht die neue TitanNit Firmware V1.25 mit zahlreichen Verbesserungen und Korrekturen zur Verfügung:
    Aufgrund tiefgreifender Änderungen ist eine Übernahme der persönlichen Einstellungen wie Senderlisten, Netzwerkeinstellungen in die neue Firmwareversion V1.25 nicht möglich.
    Lediglich die Senderlisten können vor der Installation der v1.25 mit dem PC-Programm SatChannelListEditior V4.7 auf dem PC gesichert werden. Anschließend können die Senderlisten unter V1.25 nur mit dem Neunen SatChannellistEditior V4.9 wiederhergestellt werden.

    Nachfolgend eine Liste der Änderungen und Problemlösungen:


    - v1.25 / M20788

    ·Probleme bei Aufnahmen und Umschalten mit Multituner behoben
    ·CI Modul Erkennung verbessert, u.a. Maxcam und Unicam Probleme behoben
    ·EPG Kurzübersicht im Menü hinzugefügt. Kann auch durch drücken der Taste "0" in der Senderliste aufgerufen werden.
    ·Update der Treiber für den Cardreader
    ·Bouquet- / Favoritenlistenwechsel in der EPG-Ansicht mit den Tasten << ****
    ·Automatischer Untertitelstart (unter Bild- und Ton-Einstellungen einstellbar)
    ·Permanent-Time-Shift Funktion hinzugefügt (Beta- / Testversion)
    oKann unter Hauptmenü --> Einstellungen --> TimeShift Einstellungen aktiviert werden.
    ·WLAN Einstellungen optimiert
    ·Multimediafunktionen weiter verbessert
    ·Probleme beim Abspielen und dem Vor- und Zurückspulen von Aufnahmen behoben
    ·Suche nach Wiederholungen in der EPG-Ansicht durch drücken der Taste "0" hinzugefügt
    ·Einfacher Sleeptimer: Neben der Eingabe der Zahlen kann auch durch drücken der Tasten << **** die Zeit eingestellt werden
    ·Ausschalten nach Aufnahmeende über Ausschalttimer möglich
    oIm Ausschalttimer-Menü die Taste „GRÜN“ für das Ausschalten „zum Sendungsende“
    ·Meldung beim automatischen Herunterfahren (z.B. nach einer Aufnahme)hinzugefügt, bei der man die Gelegenheit hat, das Herunterfahren zu unterbinden.
    ·Direkter Abruf der detaillierten Senderinformation durch drücken der Info-Taste (2x)
    oEinstellbar unter Systemeinstellungen „Zweite Infobar“
    ·Puffergröße und Auflösung von Internetstreams kann beim Abrufen eines Streams ausgewählt werden
    ·Tuner kann über das Menü deaktiviert werden
    ·Neuer Menüpunkt "Audioverzögerung" unter Bild- und Toneinstellungen hinzugefügt
    ·SATA-Port für Festplatte kann jetzt unter Systemeinstellungen ausgewählt werden (SATA Connector = intern / extern)
    ·Programmierte Serien können jetzt in einem separaten Ordner abgelegt werden
    oIm Aufnahme Timer Menü die Taste „ROT“ für „Verzeichnis anlegen“ drücken
    ·Online Mediathek / TiThek: Anpassung der Menüansicht (Größe der Bilder) durch drücken der Menü-Taste.
    ·[AM 7600] Neuer Menüpunkt "Verhalten bei der Aufnahme" im VFDisplay Menü hinzugefügt (blink, fade out/in, show record...).
    ·Update der Icons / Symbole in der Infobar, Senderliste und EPG-Ansicht

    Danke an alle die bei der Entwicklung und beim Testen der Image helfen.


    Euer AAF Team
 

juli13

Staff member
Administrator
Messages
10,194
UFS 910 TitanNit 1.26

Code:
TitanNit exchange thread for Kathrein UFS 910
-----------------------------------------------

To make your installation of TitanNit as light as possible, I will present here the simplest of times, in my view methods for each case. Since you know your long Kathi already knows her, too, that there is a box bitchy! And also that many roads lead to Rome. So this here are only recommendations. In case of emergency you can also keep you in my emergency thread! Unfortunately, not all react Kathi's always the same. When one is something that does not go with the other. Whenever you go to Kathi and tinkering should be a null modem cable are within reach if something goes wrong!

So, now you go!
I will present the various output scenarios here.
TitanNit for Kathi UFS 910 is basically like a normal E2 Image be installed!
But this also means that it looks like an original Kathrein image so it can not be flashed with stick and press the menu button!

On the box or MINIUBOOT Maxiuboot is already installed
This is the simplest case. How can I tell now?
I know all other images except the original and the original Kathrein Kathrein mods need the Flash MINIUBOOT or MaxiUboot. Nevertheless, you can check the following:
Kathi back off the switch. Then take off all USB devices. Now take the remote control and put the finger ever on the REC button. Then Kathi turn and press the REC button. Now if the word should Kathrein UFS 910 disappears "miniflash search" come on the screen. Then everything is ok and you can flash the image.
If you have already an E2 or Neutrino Image image in flash, then a MINIUBOOT Maxiuboot or is in any case already installed otherwise the image would not start. Now there are many ways to install.
Flashing with MINIUBOOT or MaxiUboot
In this method, no connection to Kathi is needed and it is certainly the easiest and fastest method! But be careful! Not every constellation that works for 100 percent reliable. Have very few times had the case that the image does not boot after. Of the Kathrein 2:02 after first installation of the MINIUBOOT went but always!
Beautiful, then just take a USB stick and the TitanNit - Image in miniFLASH.img (note the spelling!) Rename and play in the Stammverzeichis the stick. Now plug the stick into the front USB jack and settle all other USB devices. Now the switch off and on again and the REC button on the remote control. Now the image should be found and the flash starts.
Installation from the Image bsiherigen out about the AAF Panel
To be transferred to the / var / swap / images via FTP the image with the md5 file or install directly onto the tick and swaps with the AAF-Panel and ready to flash.
Installation with the AAF Recovery Tool (ART)
This tool is the Swiss knife for Kathi. So that we get every Kathi control again, can install mini and MaxiUboot, set defaults again and especially flash images. For this purpose you need a null modem cable and a crossover cable to Kathi. There is also a patch cable if you have a router in between.
Quite simply then: Image tab and select flash as a normal flash E2 image and done. Note: If you get no network connection to Kathi is it the firewall often! This will temporarily deactivate! It must be set a fixed IP for the LAN port on the PC / notebook.
Installation with MPI (multi-part installer)
This can also be flashed. This requires a network connection to Kathi.
On the box or not MINIUBOOT Maxiuboot is still installed
This is mostly the case if you still have the original Kathrein Image or even a mod image in flash. Most of the users then use BA to serve images from the stick to starten.Ok, then once MINIUBOOT Maxiuboot or install anything else goes. Here I recommend you the AAF Recovery Tool from the Database to use. You will need a null modem cable and a network connection to Kathi. Run as admin and assign a fixed IP. Firewall may represent times. I recommend you MINIUBOOT because this is not the original bootloader is replaced. Maxiuboot overwrites the original bootloader Kathi. However, both are identical in the function. So MINIUBOOT enough and secure! You can install MINIUBOOT the following manner:
With AAF Recovery Tool
Requires a null modem cable and a network connection, install any FTP server with KCC!
With MPI
What is needed is a network connection; may FTP server install with KCC!
With the terminal
Is only needed a null modem cable
So if MINIUBOOT was successfully installed as described above, then flash the image!

A few more notes!
The settings of E2 you can not use. This must be set up once. With the SatChannellistEditor you can look up the bouquets and convert to titanium and upload!
I recommend a swap tick in the use of extensions. Can you create quickly with Create Mini! Then of course you can also use other images as a USB if you want!
The following test scenarios tested successfully:

Kathrein 2:02> MINIUBOOT with ART> miniFLASH.img> Went great!
E2 Do not Cry> AAF Panel> ok
E2 Do not Cry> miniFLASH.img> ok
No matter what with ART> Image flashing> ok

Good luck!


We wish you much fun with your TitanNit and Kathi UFS 910!
The best image that has ever walked on the Kathi!






Changelog 1:26

Effective immediately, the new firmware V1.26 TitanNit with numerous improvements and fixes available:

+ Auto Backup in flash (mnt)
+ Downmix workaround (swapextensions stick must be labeled on SWAP and the downmix be ipkg installed)


- V1.26 / AAF_M21275_g4791_ufs910_update_titan_v1-26_p211_P191-FFM_M3_FULL_nodebug.img

Thanks to all who help in the development and testing of the image.


Your AAF team

DOWNLOAD
 

kargo.25

Super VIP
Messages
9,725
UFS912_TitanNit_Edition_1.27


AAF_M21391_g4791_ufs912_update_titan_v1-27_p211_P191-FFM_M3_FULL_nodebug.img

Achtung:
Beim Installieren per usb/art wird der Autobackupbereich immer gelöscht (Recovery-Image), beim Onlineupdate bleibt der Bereich erhalten.

Mit dieser kostenlosen Image Version können die Grundfunktionen getestet werden:
CI Module mit ABOs, Tuner, zappen, Aufnahmen...usw.
Wer die Online - Funktionen benötigt, kann sich bei Atemio seine Version ab Montag eintragen lassen.
Es wird eine Lizenzgebühr von 22€ zu zahlen sein.
Ihr könnt also erst mal in Ruhe testen ob alles passt und dann bei gefallen euch eine Lizenz bestellen.
Diese wird in der Regel in ca 24h aktiv außer am Wochenende, da dauert die Bearbeitungszeit wegen der Öffnungszeiten länger.
Wenn ihr Freitag abend bis 18.00 Uhr bestellt, bekommt ihr Montag die Antwort von Atemio und könnt eure Version offline aktivieren.



DOWNLOAD - UFS_912_TitanNit_Edition_1.27.rar
 

juli13

Staff member
Administrator
Messages
10,194
UFS910_TitanNit_Edition_1.30

Changelog 1:30
Code:
New Samsung LCD Skins
Conversion of IPC to TPK
WiFi Fix
Call Monitor Fix
Updated all skins or adjustments to FW
vfd Fix
Adjustments to the language files
ufs910 new Tuner Driver
Atemio 7600 new Tuner Driver
minidlna fixed
standby fix
iboot for Atemio 510 and 500 Atemio
iboot for Atemio 7500 and 7600 Atemio
new stations mustards and bouquets
new picons for the new station
fix unicable
Added backup mnt
Auto Timer fix
Improvement of Emumanagment
Scan cable fix
Improved boot times
mc fix
Transponder file fix
Tithek update the images
Timeshift fixed
epg fix
fix boot error
Transmitter / bouquet improves the sorting sorting function
Displays channel start time in graphical EPG
new oscams
mle-hd and added movie4k
Turksat card in oscam config settings selectable via Reader
 

juli13

Staff member
Administrator
Messages
10,194
UFS910_TitanNit_Edition_1.32

Code:
[B]Changelog 1:32[/B]

Update Channel List Astra 19.2 and 13.0 Hotbrid
Update station list and Unity Media, Kabel BW
update library
XXX Streams / portals can be hidden in the library
(Menu button in the library press)
Fixed and improved problem with sorting in the File List
Added Smart Card menu item
Improved file manager / file browser
Improved hard drive display
Repair function of var / mnt improved
Improved auto timer
Fixed a bug with various packages TPK
Record timer added to the Web Interface
 

baha2

Super VIP
Messages
6,530
UFS910_TitanNit_Edition_1.34

Code:
AAF_M24403_g4866_ufs910_update_titan_v1-34_p211_P191-FFM_M3_FULL_nodebug.img

[B]Software Update auf 1.34:[/B]

Diese Version wird nicht im Online-Update angeboten,
die TPK Installationsroutinen wurden verbessert
und sind nicht kompatibel mit der alten Version.
Bitte alle SWAP Erweiterungen vorher löschen
und später die TPKs neu installieren.
Die Swaperweiterungen auf USB/HDD können im Menü Erweiterungen vor dem Update gelöscht werden.
Alle TPKs im Flash werden in mnt gelöscht und gehen bei der Installation verlohren,
durch ein neues Layout wurden die Booteigenschaften verbessert ( ca 30 Sekunden bis zum Bild).

Folgende Punkte stehen zur Auswahl bei der neuen TPK Installation:

FLASH Installation (FLASH)
MNT Installation (FLASH)
SWAP Installation (USB oder HDD)

FLASH: Installation im Flash, wird nach einem Imageupdate gelöscht.
MNT: Installation im Flash, nach Imageudate noch vorhanden.
SWAP: Installation auf USB/HDD, nach Imageupdate noch vorhanden.

Achtung:
Beim Installieren per usb/art wird der Autobackupbereich immer gelöscht (Recovery-Image), beim Onlineupdate bleibt der Bereich erhalten.
[B]
Changelog 1.34[/B]


update channelscan
add flag to copy only provider/sat with channel
add funktion to del empty favorites
don't scan deaktive tuner
add e2webserv
extend bouquet action after scan with delete
del all channel on scan (include akt channel)
free channelhistory after scan
update dvbsubtitel
add 2x rcyellow to player for subtitle
new Xpicons
add 4tb support CONFIG_EFI_PARTITION=y
update player.h for new libeplayer3 and enable wmv
fix hbbtv update (no space in /tmp)
fix provider sort
fix colorformat
fix epgsearch
fix minidlna
fix nsfb and callmonitor
add libpack
add all 10 beta images to public-wiki-images dir
add subtitle and epg pid to record
tithek add ARD
update imdbfolder
update imdbfolder
fix dlna build
fix myvideo singel charts
fix start gbox
fix Dänmark YouSee cable transponder
fix po (de,nl,it)
fix browser
add sat to bouquet copy
fix lcdsamsung skins
fix codecpack check
fix mountSwap to vfd output
change jffs2 pack
check free space in /tmp before write tpk backup
fix minidlna
fix titan-plugin-keymaps-neutrino
activate dev/release switch
update aller Skins
update almost all skins: hide PIN input
fix Mediaplayer
update all picons
update mgcamd,gbox
update CI Modul
update Webif add webtimer from epg direkt
Webif: Screenshot Autorefresh
webif: fix record button
update all Settings
update unicable add unicable wait on first zap
fix standby
after soft standby wait for unicable router
fix deaktivate cam
PTS..... play button opens the movie menu
add wlan module to root
set wlan dhcp as default
add 6089 and oscam_8933
fix oscam cardreader v14 mhz369
[atemio510/520] optimize network speed
[atevio700/7000] change layout
922/910 workaround multicom
remove wlan ufs910/922
fix ufs912 updateusb
[ufs912] add 3tb hdd support
[ufs910] add 3tb hdd support
[ufs910/922]start TitanNit 30sec
[ufs910|ufs922] change layout more mnt
activate restor backup full image

Danke an alle die bei der Entwicklung und beim Testen der Image helfen.


Euer AAF Team
 

baha2

Super VIP
Messages
6,530
UFS 910 TitanNit Edition 1.44

Changelog 1.44

- TPK Installationsweise geändert ab der Version 1.34
- TS und PTS verbessert
- Mediacenter verbessert
- Speicherplatzverwaltung verbessert
- fix open VPN und gemediarender
- Update der Satlisten,der Skins,der Screensaver und der Picons
- formatieren und mounten von Festplatten auch über 2 TB
- Unterstützung von ext4 formatieren der Speichermedien integriert

Danke an alle die bei der Entwicklung und beim Testen der Image helfen.

Euer AAF Team
==================================================
Changelog 1:44

- TPK installation method changed from the version 1.34
- TS and PTS improved
- Improved Media Center
- Improved memory management
- Fix open VPN and gemediarender
- Update Satlisten, the skins, the screen saver and the Picon
- Format and mount hard drives and more than 2 TB
- Support for ext4 format the storage media integrated
- HBBTV extended

Thanks to all who help in the development and testing of the image.

Your AAF team...
 

baha2

Super VIP
Messages
6,530
TitanNit Version 1.47 UFS 910

AAF_M25136_g4886_ufs910_update_titan_v1-47_p211_P191-FFM_M3_FULL_nodebug.img

  • Beim Installieren per usb wird der MNT Bereich im Image gelöscht das ist gleichzusetzen wie ein (Recovery-Image), beim Onlineupdate bleibt der Bereich erhalten.
  • Besuchen Sie die das AAF Digital Forum und laden Sie sich die aktuellste TitanNit Firmware.
  • Entpacken Sie die ZIP-Datei.
  • Kopieren Sie nun die entpackte Update-Firmware-Datei auf einen in FAT32 formatierten USB-Stick und nennen Sie in miniFLASH.img um.
  • Hinweis: Der USB Stick sollte nicht über Windows, sondern über ein separates Programm wie z.B. das „HP USB Disk Storage Format Tool“ (Freeware Programm) formatiert werden. Des Weiteren empfehlen wir günstige USBSticks mit einer geringen Speicherkapazität sowie Lese- und Schreibgeschwindigkeit.
  • Schalten Sie das Gerät aus.
  • USB Stick mit der Update-Datei anschließen
  • Gerät einschalten (Netzstecker anschließen) und gleichzeitig mit der Fernbedinung 5 sekunden auf die Record Taste drücken bis „miniFlash search“ erscheint, anschließend beginnt die Installation. Erst danach die Taste loslassen
  • Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.
  • Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen


Changelog TitanNit Version 1.47:
1. Im Mediacenter wurde "an der letzten Stelle beginnen" gefixt.
2. Die RC-Recall Funktion für die Atemio 520 wurde eingebaut.
3. Für die Fernbedienungen die RC-Resolution und die RC-Mute an der Atevio700/7000 und der Atemio 7600 funktionieren alle Tastenbelegungen nun richtig.
4. Die Resolutionfunktion wurde erweitert für Scart und YUV.
5. Die Aufnahme des Screenshoot für das Hintergrundbild wird nach 10min einer Aufnahme gemacht, ist die Aufnahme kürzer dann wird der erste Frame genommen.
6. Die Screenshootfunktion im Mediacenter auf der Recordtaste gefixt.
7. Im Webinterface bei den Screenshoot geht nun die Videoanzeige plus die OSD Anzeige.
8. Im Mediacenter wurde die automatische tmdb/imdb Hintergrundbildersuche gefixt.
9. Die manuelle Suche im imdb wurde gefixt.
10. Sat-Senderlisten default und TPK-Updates angepasst.


Danke an alle die bei der Entwicklung und beim Testen der Image helfen.


Euer AAF Team
 

baha2

Super VIP
Messages
6,530
TitanNit Version 1.49 UFS 910

Beim Installieren per usb wird der MNT Bereich im Image gelöscht das ist gleichzusetzen wie ein (Recovery-Image), beim Onlineupdate bleibt der Bereich erhalten.
Besuchen Sie die das AAF Digital Forum und laden Sie sich die aktuellste TitanNit Firmware.
Entpacken Sie die ZIP-Datei.
Kopieren Sie nun die entpackte Update-Firmware-Datei auf einen in FAT32 formatierten USB-Stick und nennen Sie in miniFLASH.img um.

Hinweis: Der USB Stick sollte nicht über Windows, sondern über ein separates Programm wie z.B. das „HP USB Disk Storage Format Tool“ (Freeware Programm) formatiert werden. Des Weiteren empfehlen wir günstige USBSticks mit einer geringen Speicherkapazität sowie Lese- und Schreibgeschwindigkeit.

Schalten Sie das Gerät aus.
USB Stick mit der Update-Datei anschließen
Gerät einschalten (Netzstecker anschließen) und gleichzeitig mit der Fernbedinung 5 sekunden auf die Record Taste drücken bis „miniFlash search“ erscheint, anschließend beginnt die Installation. Erst danach die Taste loslassen

Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.

Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen


Changelog:


- Festplatten Formatierung geändert
- Mountsystem überarbeitet
- Schnittfunktion der Aufnahmen
- Settingsupdates
- HBBTV entfernt, dadurch im Image mehr Ram
- Mediathek überarbeitet
- Panelfunktionen im Image unter Einstellungen
- Flash Beschriftungen nach unten verschoben
- Screenshoot mit Videobild eingebaut
- Mediatheken lokale Suche eingebaut
- komplette Grundimage wurde geupdatet
- vizcam, mod oscam und ymod oscam entfernt
- Web Browser Favoriten Update
- fix Mutetaste
- marker autoseek
- fix config gbox
- TPK Updates gefixt
- Update der Kanallisten für TPK und default Liste
- Picons für neue Sender angepasst
- Skins angepasst für neuen Funktionen im Menüs
 

baha2

Super VIP
Messages
6,530
UFS 910 TitanNit Edition 1.51

• Update aller Skins
• Xupnpd Support
• Problem mit Jugendschutz behoben
• Probleme mit Farbeinstellung behoben
• Update der Transponder und Satellitenlisten
• Menüsprachen aktualisiert


Danke an alle die bei der Entwicklung und beim Testen der Image helfen.
 

baha2

Super VIP
Messages
6,530
UFS 910 TitanNit Edition 1.52

• Update aller Skins
• Xupnpd Support
• Problem mit Jugendschutz behoben
• Probleme mit Farbeinstellung behoben
• Update der Transponder und Satellitenlisten
• Menüsprachen aktualisiert

Changelog:
In der Mediathek ist ein Listenmodus hinzugefügt
Favoriten können jetzt auf der Box bearbeitet werden
xupnd Server für Playlisten nun für das Streamen z.B. für Handys möglich
wird unter diesen Menüpunkt aktiviert: Erlaube Umschalten loading zapping streamlink
TecTime in der TiThek eingebunden
Automatische Suche der Hintergrundbilder gefixt
Ext4 formatieren eingeführt und ext3, ext2 gefixt
mounten gefixt Festplatten und USB Sticks
Filecheck überarbeitet
full Backup nun möglich wenn ein Ordner backup sowie ein Speichermedium vorhanden ist
ufs910, ufs922 Plugins ausgelagert, dafür Sprachdateien mit eingebaut u.v.m
Windowsfreigabe nun möglich (Netzfreigabe wird über Benutzername und Pass intern extern eingebunden)
Atemiopanel eingebaut ins System und über Menü erreichbar
(Menüeinstellungen autostart)
Webinterfaceeinstellungen erweitert:
Plugin Taste belegbar
Media Taste belegbar
verschieben mehrere Sender wurde gefixt

Danke an alle die bei der Entwicklung und beim Testen der Image helfen.

Euer AAF Team
 

juli13

Staff member
Administrator
Messages
10,194
UFS 910 TitanNit Edition 1.53


Code:
update_titan_v1-53_UPDATEUSB_stable_M28886
 

baha2

Super VIP
Messages
6,530
UFS 910 TitanNit Edition 1.54

Changelog 1.54:

17.05.2014: Gestern

add pictures for new menu items
[NEW_SKIN_Icons] rename some icons
transponder default -1
fix Settings andy-1 4xSat and Kabel Deutschland THX Bulldog
[de po] Primetime
fix default_skin
[tithek] fix vidstream and use cur git
fix tvtoast server parser
 

baha2

Super VIP
Messages
6,530
UFS 910 Version 1.60

v1.60

Allgemeine Änderungen:

Erweiterungen in den TPKs wieder alle vorhanden

  • Loading-Anzeige beim Onlineupdate verbessert
  • Reboot Problem nach Standby behoben
  • Skins überarbeitet
  • TPK Angebot erweitert
  • TPK Verisons-Update gefixt
  • Kabelsuchlauf verbessert
  • Settings und Transponder gefixt
  • Problem mit HDMI Ausgang im Standby behoben
  • Menüsprache erweitert und verbessert
  • Problem im Lautlos-Modus behoben
  • Infobar-Anzeige verbessert
  • Problem mit Festplatten-Standby behoben
  • Webinterfache verbessert
  • Tithek erweitert und neue Hoster hinzugefügt
  • Aufnahmen bis zu 10 Titel gleichzeitig ermöglicht
  • Suchzeit bis zum Start des Hosters 12 Sekunden verkürzt
  • Bedienungskomfort an der Box verbessert
  • TPK DVD Player für Mipselboxen entfernt
  • neue Boxen eingebunden für TitanNit Software
  • Registrierung Community gefixt (crypted)
  • Spulen bei mkv Dateien nun möglich im Mediacenter
  • u.v.m.

Verison 1.60 Changelog:

- fix Module switch 1.60

- Update Treiber mipsel Boxen

- fix Minitv

- fix LCD Samsung

- neuer Gitbuildingserver

In der Database geändert den Download, bitte die Version 1.60 benutzen.

Es wird momentan erst auf eine neue Version geschalten, wenn die stable fertig ist.

Dann sind auch einge TPKs der älteren Version nicht verfügbar,

daher sollte man auf die 1.60 stable Updaten bzw. die höhere Version nutzen,

um alle Erweiterungen wieder im TPK Download zu bekommen.

Die nightly Image laufen im selben Ordner weiter unter der Version 1.60.
 
Status
Not open for further replies.
Top