Latest Version Of MultiPart Installer AAF UFS9XX

Status
Not open for further replies.

tani1

Staff member
Super Moderator
Messages
17,767
Black_64 has a program built for you to create a multi-part stick to the BA installation to use or create.
It aims to VisMan developed by KCC NOT replace, but rather serve as a transition until VisMan more time to the multi-part installation at the KCC add. From GOst4711 he got support with version 5.4.4 of the BA for the UFS910 and for the UFS 922 BA 1.0 version.

The following features are included

- Install of 1.0 on the BA UFS922 in flash
- Install 5.4.4 on the BA UFS910 in flash
- Installing a BA from the flash image and from the BA / UFS_Image of the UFS910 and UFS922.
- Installation of an image of. / UFS_Images from the BA
- Reboot and delete image
- Renaming images
- Set the Start Image
- Reading the current image list
- Copy of the settings, channels, var, amount.ini by running Image
- Containing language settings are German, English and Spanish

If you have a new image is installed, you will be asked to name the image to change or it will name the image so transferred.
The image, which is set to restart, has a blue color.
AAF UFS9XX Multipart Installer 1.0

I build another program to use for multipart BA.
It's NOT to replace KCC but we can use this until VisMan has more time to add multipart to KCC.
It's like BA_help from GOst4711.
Only we made a few more options.

- Install on UFS922 BA in Flash
- Installing image from a Flash / BA / UFS_Image for UFS910 and UFS922.
- Install a image from .. / UFS_Images
- Reboot
- Delete image
- Rename image
- Set boot image
- Drag and drop from UFS_Images Installed images to list
- Copy settings, channels, var, amount.ini from running image

When installing a image you will be asked to change the name (or keep the name)
The image that is set for boot has a blue color.
 

marce

VIP
Messages
7,115
AAF UFS9XX MultiPart Installer 1.1


Code:
UFS9xx MultiPart Installer BETA
===============================

V1.1

- fix for FTP login
- fix install BA on virgin UFS922
- fix German translation
- add device freespace check
- add delete conformation to avoid accidental deleting
- changed rename image
- added multiple profiles (Box/User profile)
- sorted BA-Image list and UFS_Images
- add BA-install for UFS910 Flash (install BA 5.4.4 or higher)
- add enable 2bl if not active (UFS910)


Suggested Install for UFS910

AAF2.0e in Flash
BA 5.4.5
Baboot 0.7

Suggested Install for UFS 922

Ba 1.0 for UFS922

No baboot installation needed because it's integrated in BA 1.0.
There will be also no question to install baboot for UFS922.
 

tani1

Staff member
Super Moderator
Messages
17,767
AAF UFS910/UFS922 MultiPart Installer 1.2

V1.2

- add backup BA-image
- add drag and drop for Images list
- fix for drag and drop when mousedown in list
- fix "please Wait" screen topmost
- fix parsing IP-adres with zero's


This will create a complete backup of the BA-image you select. (tar.gz)
This process can take from 15 to 35 minutes, so please be patient.
The *.tar.gz will be created in ../UFS_Images and will be copy to your pc (it will ask where to store).
After the copy the tar file remains in ../UFS_Images (if you don't need it you can delete it)
 

juli13

Staff member
Administrator
Messages
10,194
AAF UFS9XX MultiPart Installer V1.4

I build another program to use Multipart for BA.
It's NOT to replace KCC but we can use this untill VisMan has more time to add multipart to KCC.
It's like BA_help from GOst4711.
Only we made a few more options.

- Install BA on UFS922 in Flash (with org. image or new E2 flash image)
- Installing a image from Flash / BA / UFS_Image for UFS910 and UFS922.
- Install a image from ../UFS_Images
- Reboot
- delete image
- rename image
- Set Boot image
- drag and drop from UFS_Images to Installed images list
- Copy settings, channels, var, amount.ini from running image

When installing a image you will be asked to change the name (or keep the name)
The image that is set for boot has a blue color.
 

juli13

Staff member
Administrator
Messages
10,194
Code:
AAF UFS9XX MultiPart Installer V1.4d

V1.4d

- add install BA for E2_flash UFS922
- fix for BA install Original flash image
- show always UFS_Images list
- some timing tuning (improving speed)
- add read image signature
 

juli13

Staff member
Administrator
Messages
10,194
AAF_MultiPartinstaller1.6_UFSxxx

build another program to use Multipart for BA.
It's NOT to replace KCC but we can use this untill VisMan has more time to add multipart to KCC.
It's like BA_help from GOst4711.
Only we made a few more options.

- Install BA on UFS922 in Flash (with org. image or new E2 flash image)
- Installing a image from Flash / BA / UFS_Image for UFS910 and UFS922.
- Install a image from ../UFS_Images
- Reboot
- delete image
- rename image
- Set Boot image
- drag and drop from UFS_Images to Installed images list
- Copy settings, channels, var, amount.ini from running image

When installing a image you will be asked to change the name (or keep the name)
The image that is set for boot has a blue color.

Here are the copy options:

Copy channels:
/usr/local/share/enigma2/bouquets*
/usr/local/share/enigma2/userbouquet.*
/usr/local/share/enigma2/lamedb
/usr/local/share/enigma2/satellites.xml
/etc/tuxbox/satellites.xml

Copy Settings:
/usr/local/share/enigma2/settings

Copy Picons:
/usr/local/share/enigma2/picon (complete dir)

Copy mount:
/usr/automount/amount.ini
/etc/auto.misc
/usr/local/share/enigma2/automounts.xml

Copy Var:
/var/emu/*.*
/var/etc/*.*
/var/etc/autostart/start-config
/var/keys (complete dir)

Copy BlueKey action:
/var/.blueKey or /var/etc/blueKey (depending on copy from )

Copy Plugins:
/usr/lib/enigma2/python/Plugins/Extensions/ + selected plugin ( if selected )

Copy bootp.conf:
/var/baroot/ba/ba/{imagename}/bootp.conf
/var/baroot/ba/ba/{imagename}/bootp2.c

Danke an Black_64 für dieses Tool und das gute HowTo von joergurmel,
sowie den AAF-Betatestern.


ungefähre Größe:
 

elgeneral

Well Known Member
Messages
7,811
Code:
[SIZE="2"][B][COLOR="Blue"]AAF UFS910/UFS922 MultiPart Installer V1.7	  [/COLOR]        

AAF UFS910/UFS922 MultiPart Installer
============================

V1.7[/B][/SIZE]

- change path automount.xml to /var/etc/automount
- change check mini U-boot 1.3 installed AND activated.
- add copy bootp/bootp2 to current image
- add save bootp/bootp2 to disk
- add load bootp/bootp2 from disk
- add bootp/bootp2 simple editor
- fix copy auto.misc
- fix bug copy plugins
- copy bluekey only for /var/etc/bluekey
- fix bug copysettings
- fix for settings file and channel list (new rev's)
- add check for Mini U-boot 1.3 installed (can be disabled)
- add new flasch tool for UFS910/UFS922 (thanks to obiwatn76)

Note to new AAF LZMA E2 image:
To install the new AAF NEW LZMA E2 images you need to have Mini U-boot 1.3 installed AND active !!!
If you do install the new AAF NEW LZMA E2 image without Mini U-boot 1.3 your box will NOT boot.
Then you need to install the recovery image.

Note to flashtool:
The new flash tool can flash kim-images and only images.
The difference is that kim-images will change the bootargs to fit the kim-image.
When flashing just a image (without kim file) MPI flash the image but don't change the bootargs.
This can be handy when flashing the same image structure, or you want to set the bootargs your self.

If you have the Kathrein original FW 2.02RC in flash then MPI uses multi part flashing.
This takes a bit longer (sorry, i will later work to improve the upload speed).

Note to Mini:
1. Device name may have max 16 chars !!!
2. when installing a image in miniboot, MPI will copy settings,channels,...if selected !
3. make sure you add the serverip in the mainscreen (NEW)

To install a USB/BA image or set the boot default, click on the right mouse button to select the option.

Miniuboot file is not include. You must download the latest version.
MPI will ask where you stored the file. Then it will be uploaded.

Don't forget you need to prepare your USB stick for MiniUboot. 

UFS9XX MultiPart Installer

I build another program to use Multipart for BA.
It's NOT to replace KCC but we can use this untill VisMan has more time to add multipart to KCC.
It's like BA_help from GOst4711. 
Only we made a few more options.

- Install BA on UFS922 in Flash (with org. image or new E2 flash image)
- Installing a image from Flash / BA / UFS_Image for UFS910 and UFS922.
- Install a image from ../UFS_Images
- Reboot
- delete image
- rename image
- Set Boot image
- drag and drop from UFS_Images to Installed images list
- Copy settings, channels, var, amount.ini from running image 

When installing a image you will be asked to change the name (or keep the name)
The image that is set for boot has a blue color.

Here are the copy options:

Copy channels:
/usr/local/share/enigma2/bouquets*
/usr/local/share/enigma2/userbouquet.*
/usr/local/share/enigma2/lamedb
/usr/local/share/enigma2/satellites.xml
/etc/tuxbox/satellites.xml

Copy Settings:
/usr/local/share/enigma2/settings

Copy Picons:
/usr/local/share/enigma2/picon (complete dir)

Copy mount:
/usr/automount/amount.ini
/etc/auto.misc
/usr/local/share/enigma2/automounts.xml

Copy Var:
/var/emu/*.*
/var/etc/*.*
/var/etc/autostart/start-config
/var/keys (complete dir)

Copy BlueKey action:
/var/.blueKey or /var/etc/blueKey (depending on copy from )

Copy Plugins:
/usr/lib/enigma2/python/Plugins/Extensions/ + selected plugin ( if selected )

Copy bootp.conf:
/var/baroot/ba/ba/{imagename}/bootp.conf
/var/baroot/ba/ba/{imagename}/bootp2.conf


Danke an Black_64, joergurmel und den gesamten AAF Team.
 

tani1

Staff member
Super Moderator
Messages
17,767
AAF UFS910/UFS922 MultiPart Installer V1.7a
V1.7a

- add check free mem flashtool
- fix copy settings
- fix update imagelist after install BA image
 

elgeneral

Well Known Member
Messages
7,811
AAF UFS910/UFS922 MultiPart Installer V1.7b

V1.7b

- add recovery layout to flashtool
- add check for valid ip, gateway, serverip
- add check for correct mtd size
- fix bug null reference copy settings
- add check install BA for version 6.0.0 (don't ask to install bootmenu)
- set boot time out by default to 2 sec (when installing mini)
- fix USB/HDD-tool umount
 

marce

VIP
Messages
7,115
AAF UFS910/UFS922 MultiPart Installer V1.7c


Code:
V1.7c

- fix BA detection for E2 in mini
- fix error create partitonen
- fix question 2bl on
- fix flash image name with spaces or other symbols
- check mini U-boot image name ( no *.tar.gz or *.ipk files allowed )
 

elgeneral

Well Known Member
Messages
7,811
AAF UFS910/UFS922/TF7700

MultiPart Installer

=================================

V1.9

- add Update BA
- fix set bootargs for E2 syntax fault
- fix copy emu (TF77000)
 

marce

VIP
Messages
7,115
AAF UFS910/UFS922/TF7700 MultiPart Installer V2.6

Code:
UFS9XX MultiPart Installer

I build another program to use Multipart for BA.
It's NOT to replace KCC but we can use this untill VisMan has more time to add multipart to KCC.
It's like BA_help from GOst4711.
Only we made a few more options.

- Install BA on UFS922 in Flash (with org. image or new E2 flash image)
- Installing a image from Flash / BA / UFS_Image for UFS910 and UFS922.
- Install a image from ../UFS_Images
- Reboot
- delete image
- rename image
- Set Boot image
- drag and drop from UFS_Images to Installed images list
- Copy settings, channels, var, amount.ini from running image

When installing a image you will be asked to change the name (or keep the name)
The image that is set for boot has a blue color.


Here are the copy options:

Copy channels:

/usr/local/share/enigma2/bouquets*
/usr/local/share/enigma2/userbouquet.*
/usr/local/share/enigma2/lamedb
/usr/local/share/enigma2/satellites.xml
/etc/tuxbox/satellites.xml


Copy Settings:

/usr/local/share/enigma2/settings


Copy Picons:

/usr/local/share/enigma2/picon (complete dir)


Copy mount:

/usr/automount/amount.ini
/etc/auto.misc
/usr/local/share/enigma2/automounts.xml


Copy Var:

/var/emu/*.*
/var/etc/*.*
/var/etc/autostart/start-config
/var/**** (complete dir)


Copy BlueKey action:

/var/.blueKey or /var/etc/blueKey (depending on copy from )


Copy Plugins:

/usr/lib/enigma2/python/Plugins/Extensions/ + selected plugin ( if selected )


Copy bootp.conf:

/var/baroot/ba/ba/{imagename}/bootp.conf
/var/baroot/ba/ba/{imagename}/bootp2.conf

THX black_64 und alle Betatester
 
Status
Not open for further replies.
Top