re:TM5402HD problem!

malteser66

Registered
Messages
105
re:TM5402HD problem!

Hi I have a problem I have got new C-lines yesterday and only one conected out of seven C-Lines that he sent my problem is my TM5402HD box can only edit 5 Port numbers I cannot put 4 numbers it will not let me the one line that is ok have got Port (17000)that's the only one it worked because it had 5 port numbers any one know how to make it to show 4 numbers insteed of 5 numbers please thanks
 

Thijs

Registered
Messages
101
when you press ok on the to edit port field.
this brings up the tm keyboard did you try to move past the first 0 with the arrows and then put in the rest of the numbers or did you try and delete one of the 0's.
or when in the "8281" menu press sat and the serverlist will be transfered to the usb device connected open this on your pc with notepad and then put the right port number in this and save the file and load to your tm the same as any other file ,give it a go and let us know if it worked.
 

malteser66

Registered
Messages
105
TM5402HD Problem

Hi thanks for your help anyway yes I tryed with one zero (0)still it comes up 5 numbers what ever you do it still comes five number I enter 8281 you are inside were you can put all the info for a C-Line I go into the bottom of the page were Port is Maked and I try to put 6000 but it changes to 53423 for no reason I tryed all six C-Lines and all comes up with the same number also I know what you are saying about the notepad I have the software Witch I got from here its for the usb like this
---------------------------------------------------------------
For TM6800 Super, TM6900 Super, TM7100, TM5402,
TM6902 & TM7102.

Extract to USB, see Slot 1 & 2 within text file for how to
fill in server details. Enter your own details, and save.
Insert USB into receiver, highlight file and press OK.
Reboot receiver, and all your details are entered into
8281 CS menu.
 

malteser66

Registered
Messages
105
Re:TM5402HD Problem

Hi again its me Alfred sorry for all this this setup is for the dreambox they did, they never did one for the TM5402HD

[CS Information]

#-------------------------------------------------------
slot0=
{
name: TM1
ip: 12345.dyndns.com
user: 12345
password: 123456
protocol: newcamd525
deskey: 01 02 03 04 05 06 07 08 09 10 11 12 13 14
port: 123456
}

slot1=
{
name: TM2
ip: 12345
user: 12345
password: 12345
protocol: CCCAM
deskey: 01 02 03 04 05 06 07 08 09 10 11 12 13 14
port: 12345

slot3=
{
}

slot4=
{
}

slot5=
{
}

slot6=
{
}

slot7=
{
}

slot8=
{
}

slot9=
{
}

slot10=
{
}
 

FENEKI

VIP
Donating Member
Messages
428
try to put on port 06000 press the EXIT on the remote it changes to 6000 m8


example
 

malteser66

Registered
Messages
105
RE:TM5402HD Problem Port

Hi first off all thanks for your help I finally found out how its than all you have to do is start from the 2nd number hit ok exit and save thats it manual does not say anything about this how to make a 5 zero into 4 zero's port (12345)=(1234)thanks again and all the best to u all for xmas
 

FENEKI

VIP
Donating Member
Messages
428
Hi first off all thanks for your help I finally found out how its than all you have to do is start from the 2nd number hit ok exit and save thats it manual does not say anything about this how to make a 5 zero into 4 zero's port (12345)=(1234)thanks again and all the best to u all for xmas


Merry Xmas you too m8
 

malteser66

Registered
Messages
105
RE:TM5402HD

HI have to say that you were all great help to me also by a chance is there an editor or a good toolbox for this box TM5402HD
so i can edit channels and remove some please thanks
 

Thijs

Registered
Messages
101
the clark tech editor studio would be the best
just copy and pasted from satmad123 post how to use he talking about a different model and should work with usb
1). Firstly upgrade the CTES to version 3.17 (3.12 won't connect properly to kingofsat).

2). Check that you can use CTES to upload and download the channel settings from the TM6800HD over the serial port and safely make a backup of the settings as a .ndf file on your PC.

3). Now check if you can update the transponder list on a particular satellite, say 28E.

4). Go into Clarke Tech Editor Studio and select 'Options', then 'Settings' and highlight 'Internet Direct Connection'.

5). Select 'File' then 'New List'.

6). Select 'File' then 'Import'.

7). Highlight 'Web' then 'Import'.

8). Select 'No' to the message 'List Modified Save Changes'.

9). Click 'Import from Web'.

10). click satellite to download.

11). Select 'TV', 'Radio', 'Bouquet or 'All'.

12). Select 'Yes' to the message 'Add to Current List'

PC then connects to kingofsat and after 5-10 seconds, comes back with an updated transponder list and all the channels for 28E. This filecan then be sent to the receiver as normal.
and google for CTechEditorStudio_Setup317
 
Top