There is a procedure to clone the DishTV India STB
DO IT AT YOUR OWN RISK !!!
EQUIPMENTS:-
---zenega reciever at least two
---zenega loader
---serial cable
---computer
---bin editor if u wana to do some fun with u/a or serial number
Procedue below :-
1.download the loader and connect reciever with pc select "data upload" from loader..save as"zenega"
2.restart the reciver
3. it will fully uploaded the data of zenega to your PC
4.rename it to zenega.bin
5.now take another zenega box
6.now select"data download" from the loader and select file-ZENEGA .BIN & restart receiver..it will show dn01-dn 100 on the box..
7.now it is clone of another reciver..
After it
8. open the master box zenega which have card........
9.take LAN wire which have 8 wires...
10.connect it under the zenega motherboard where CONAX CAM jack is fitted
11.do same as to other reciever
12 now join the CAM wires carefully if one wires goes incorrect it will all gone.......
13.now both receiver are using one card
14. enjoy
Loader i :-
1.donot use programn downloader option
2.Don't choose boot change in the loader
instruction of # ZENEGA :- EVERYTHING IS UNDER EXPERIMENT.
DO IT AT YOUR OWN RISK
DON'T BLAME ME IF ANYTHING HAPPENS
EVRYTHING DO SECURLY
additonal panga :-
you can also edit that ZENEGA.bin file using bin editor.
u can edit channels name and u/a or serial number of the reciever.
DO IT AT YOUR OWN RISK !!!
EQUIPMENTS:-
---zenega reciever at least two
---zenega loader
---serial cable
---computer
---bin editor if u wana to do some fun with u/a or serial number
Procedue below :-
1.download the loader and connect reciever with pc select "data upload" from loader..save as"zenega"
2.restart the reciver
3. it will fully uploaded the data of zenega to your PC
4.rename it to zenega.bin
5.now take another zenega box
6.now select"data download" from the loader and select file-ZENEGA .BIN & restart receiver..it will show dn01-dn 100 on the box..
7.now it is clone of another reciver..
After it
8. open the master box zenega which have card........
9.take LAN wire which have 8 wires...
10.connect it under the zenega motherboard where CONAX CAM jack is fitted
11.do same as to other reciever
12 now join the CAM wires carefully if one wires goes incorrect it will all gone.......
13.now both receiver are using one card
14. enjoy
Loader i :-
1.donot use programn downloader option
2.Don't choose boot change in the loader
instruction of # ZENEGA :- EVERYTHING IS UNDER EXPERIMENT.
DO IT AT YOUR OWN RISK
DON'T BLAME ME IF ANYTHING HAPPENS
EVRYTHING DO SECURLY
additonal panga :-
you can also edit that ZENEGA.bin file using bin editor.
u can edit channels name and u/a or serial number of the reciever.