JTAG INTERSTAR HOW TO
1st TOOLS U NEED :
2nd how to made a cable :
2nd how to connect it with receiver :
4th install driver GiveIO.sys on your pc
5th now start jtag :
1st TOOLS U NEED :
1-ej-flacher + driver for cable inst_giveio.exe (attached here )
2-masterboot for your RECEIVER
3-and of course a soft
2-masterboot for your RECEIVER
3-and of course a soft
2nd how to made a cable :
2nd how to connect it with receiver :
4th install driver GiveIO.sys on your pc
5th now start jtag :
1- press detect devis to know if every things r ok.
2- if all ok press erase button and chose ( from 3 ) erase main program then boot loader then press start (4) on both actions.
3- when erase is full press program flash (5) then chose boot loader file (6) to upload it to dsr
2- if all ok press erase button and chose ( from 3 ) erase main program then boot loader then press start (4) on both actions.
3- when erase is full press program flash (5) then chose boot loader file (6) to upload it to dsr
4- when programing is full close ejflasher and upload software with stb loader ( normal loader)