insertion software and channel lists in AMIKO SHD-8000

dejovr71

Registered
Messages
4
Uploading software via USB
Software (. Abs file) to copy to a USB drive and connect the drive to the receiver.

When the receiver up message "USB device connected to" breathe in me and find System - Upgrade through
USB.

The file for upgrade: choose the file with. Abs extension

Way to upgrade:
All bootloader - automatically deletes all settings and software upgrades along with
bootloader.
All - Clears all settings and upgraded software and channel list
Only software - software upgrades only
List of channels - channel list upgrades only
Select Start and press OK. Allow the receiver to do the whole process and I have to restart.


Uploading software via RS232
Connect the receiver to a computer RS232 modem cable, the receiver off from the mains. open the program
Upgrade Amico (ALI 3602) and set the fields like below:
File: Click on the Browse button and load. Abs file
Serial Port: Select the COM port
Upgrade Type: all sw bootloader - automatically deletes all settings and software upgrades
together with the bootloader.
all sw chanlist Deletes all settings and upgraded software and channel list
all sw - software upgrades only
chanlist - Upgrades the only channel list




When everything is set click on Next.
Wait for the Next message appears:




Turn on the receiver into the mains and wait for the process of writing software is complete and that the receiver I restarted.
 
Top