DishTV OSCam Auto Update RSA ECM key

Szihab

Registered
Messages
9
HI!

i found on one of the website OSCam for DishTV with auto update rsa ecm key, thats good news for us, i have tested it and its really works :cool:
it is demo version but owner write, if this work he add public full version, and it work.
i also found on the same site tool for decrypting box emm for dishtv.
 

Szihab

Registered
Messages
9
Code:
- put rsa.cnx in oscam configuration folder
- start OSCAM
     - remove your old rsakey and exponent
     - add boxserial, RSA key idx20 768, RSA Key idx30 768 and Exponent boxemm (6 bytes, if you have 0100001, put 000000010001)
- restart whole OSCAM
- OSCAM during init should show key index 0-9 with only 0x11
- if it does, wait for boxemm and you should get a picture

it is demo version, only with dvbapi, if more people confirm that work, owner give public full OSCam.
 

Szihab

Registered
Messages
9
Please Admins & Mods, move this thread here:
https://www.sat-universe.com/showthread.php?p=2037061304#post2037061304

Thank you :)


--------------------------------------

Tool:
Code:
Conax_RSA_Keys_Decrypter
- Decrypt only from NOR dump
- Tested on BSLA/BSKA models


OSCam's:
Code:
 OSCams are patched with your CAK7patch and CNX AutoRSA.

 

If you don't want to use Conax AutoRSA, then below 'RSA Key' you have to put 6 bytes 'Exponent' - probably 000000010001. Card will work as usual.

If you already have RSA Key, then:
1) add 6 bytes 'Exponent' below 'RSA Key', 'Key idx20 BoxEMM', 'Key idx30 BoxEMM', 6 bytes 'Exponent BoxEMM' and 'Boxserial'
2) restart reader, OSCam should show 'First start with AutoRSA...'
3) remove 'RSA Key' and 'Exponent'
4) unblock all EMMs
5) restart whole OSCam
6) during init OSCam should show keys with index 00-0F - keys will be the same

If you don't have RSA Key, then:
1) add 'Key idx20 BoxEMM', 'Key idx30 BoxEMM', 6 bytes 'Exponent BoxEMM' and 'Boxserial'
2) unblock all EMMs
3) stop OSCam
4) put 'rsa.cnx' in oscam conf folder
5) start OSCam
6) during init OSCam should show keys with index 00-0F - keys will be the same
7) wait for picture
 

Diavolo

VIP
Messages
284
@Szihab i have conax neotion pairing module tring card so witch info from module i need to put on the decrypter
 

Szihab

Registered
Messages
9
crack11@ Thank You :)
Diavolo@ tool is writed for polish stb's NOR dump, not NAND. Id you have NOR dump, you can show me on pm :)
jessika@ pm :)
 

Szihab

Registered
Messages
9
Diavolo, those log's are from readed info from the card.
You need to dump flash, NOR type flash.

edit:
from your stb, not from the card.
 

electron112

Registered
Messages
15
Code:
- put rsa.cnx in oscam configuration folder
- start OSCAM
     - remove your old rsakey and exponent
     - add boxserial, RSA key idx20 768, RSA Key idx30 768 and Exponent boxemm (6 bytes, if you have 0100001, put 000000010001)
- restart whole OSCAM
- OSCAM during init should show key index 0-9 with only 0x11
- if it does, wait for boxemm and you should get a picture

it is demo version, only with dvbapi, if more people confirm that work, owner give public full OSCam.

I think there are a lot of people who post everything and anything

this app was made by friends and me as well as oscam which is not for dish tv

this soft and oscam is for the Polish conax and in no way I specify it for dish tv
 

saifkhan

Registered
Messages
4
i need oscam pc version for dishtv sd, while i have oscam dreambox version which works fine.

can any body share oscam of dishtv for ubuntu 32 or 64 bit.
i have dreambox version oscams which works fine with my cards but i need pc version.
 
Top