How to use IQ Mointor [Blind Scan]
- Thread starter satesco
- Start date
TheHighLander
Super VIP
- Messages
- 4,144
Thanks, bro
I have scanned 16E
Crazyscan = 56 TP
IQ monitor = 32 TP
!!!!
I have scanned 16E
Crazyscan = 56 TP
IQ monitor = 32 TP
!!!!
milan58
Super VIP
- Messages
- 1,646
TheHighLander
1. To do this, you have to do the RF spectrum first, and this is how it works: Turn satellite antenna where you do not have a signal (even neighboring satellites do not fall into that position) and perform BlindScan
in both frequency bands (10700-12750 H and V).After finishing the scan, put the check mark on the RF (blue arrow) and press the Save button,Pop up windows give a confirmed answer,it will automatically be saved in the .ini file (IQmonitor_2).
2. As you have a TBS 6908, you have to remove the check mark from TBS 6983 to see the picture.As in the bottom window, I was red in the window, then write it down and then do BlindScan.In the top right window, mark the same as me.
P.S. select Tuner A for your card
1. To do this, you have to do the RF spectrum first, and this is how it works: Turn satellite antenna where you do not have a signal (even neighboring satellites do not fall into that position) and perform BlindScan
in both frequency bands (10700-12750 H and V).After finishing the scan, put the check mark on the RF (blue arrow) and press the Save button,Pop up windows give a confirmed answer,it will automatically be saved in the .ini file (IQmonitor_2).
2. As you have a TBS 6908, you have to remove the check mark from TBS 6983 to see the picture.As in the bottom window, I was red in the window, then write it down and then do BlindScan.In the top right window, mark the same as me.
P.S. select Tuner A for your card
TheHighLander
Super VIP
- Messages
- 4,144
At last!!!
More and more TPs have been caught!! (63)
Thanks, my friends..:thum:
More and more TPs have been caught!! (63)
Thanks, my friends..:thum:
frankviana
Registered
- Messages
- 73
Where I find this software?