Latest Drivers for DM 920UHD

[DR-10]

Update: 06/12/2017

update dm920 hardware drivers (fixed DVB-S2X Multistream for BCM45308X)

[DR-10]

Update: 11/12/2017

update dm900/dm920 hardware drivers
- bcm45208/bcm45308x: don't report DVB-S2 QPSK transponders as auto modulation
- bcm45308x: small 16apsk/32apsk support fix
- bcm45208/bcm45308x: tuning to DVB-S2 transponders after blindscan sometimes did not worked... fixed that

[DR-10]

Update: 16/12/2017

update dm900/dm920 hardware drivers
- fixed progressive/interlaced detection when deinterlacer mode is forced to off or on
- fixed wrong returned framerates for interlaced content
- fixed demux problem on channel change between two physical fbc tuners (dm920)

[DR-10]

Update: 09/02/2018

update dreambox hardware drivers
- revert framerate change introduced with 20180130 drivers
- use latest firmware for Si216x-D60 based tuners
- fixed sometimes not working automatic timer wakeup
- dm920:
- improved support for higher transponder bitrates
DVB-S2X FBC Tuner (45308x):
- improved DVB-S2X support
- faster transponder locking times under certain circumstances
- dm900/dm920: fixed wrong colors with some TVs in 2160p mode (e.g. Panasonic/Sony)
- revert framerate change introduced with 20180130 drivers
- use latest firmware for Si216x-D60 based tuners

[DR-10]

Update: 22/02/2018

update dreambox hardware drivers
- dm900/dm920 fixed a unicable problem with bcm45208 fbc tuner
- fixed a possible kernel oops on services without pcr pid

[DR-10]

Update: 21/03/2018

update dm920,dm900 hardware drivers
- bcm45308x:
- fixed pixelation on some transponders since 20180209 drivers
- allow HDR for 2160p25/p30/p24 too

[DR-10]

Update: 23/03/2018

update dm900/dm920 hardware drivers
- reverted change for HDR support for 2160p24/p25/p30
(it seems this modes are pure 8bit modes .. so HDR is not possible and it completely breaks this modes)

[DR-10]

Update 09/04/2018

update dm920 and dm900 hardware drivers
- fixed possible mode switching problems on hdmi output with 4K modes
- fixed support for high bitrate transponders (45000 8PSK 5/6 is now working okay on all tuners)
- no CI support for transponders with such high bitrates yet!

[DR-10]

Update 25/04/2018

update dm920/dm900 hardware drivers:
- bcm45208/45308x: longer tune timeouts for low symbol rate transponders
- fixed possible demux deadlock in combination with a fbc tuner and dm920
- fixed possible race condition on open/close audio/video encoder from different processes

[DR-10]

Update 14/05/2018

update dm920 hardware drivers (fixed a possible demux deadlock)