AAF E2 Olympia Image for Octagon SF-1018 Twin HD

AAF E2 Olympia Image for Octagon SF-1018 Twin HD Linux

Original Image for Atevio 7000 USB clon Octagon SF-1018




Image Info

AAF Olympic Image Atevio 7000 USB

Changelog since last winter AAF Image Release:

SH4 Duckbox Project git rev281:
+ Driver optimizations (thanks to the TDT)
HD DVD Player Skin fix
+ Kernel optimization
E2 + Various minor bug fixes
+ Player behavior improved
Timeshift + Start improving
+ Update kernel config

Audioplayer mit Playlistsupport


Radioplayer mit Playlistsupport


AAF: (based on flash M2207)
+ Olympic infobar Skin
+ Update Auto Resolution Plug
+ New V13 station list
+ Playlist support in Media Center
+ WebradioFS green screen fix
+ Various bug fixes
+ When sound problems can be placed on the AAF panel nosync Yes

Bootvideo:




Known issues:
- Sometimes, after the switch zapping no sound (sound or channel helps)
- After prolonged use it can happen that the sound stutters help switch ()
- The AGC indicator is always at 0%
- DTS downmix does not go

Thanks to Team Ducktales for the great base image and all have been tested and will allow that image.

If no boot image is displayed:
-> AAF Panel -> Settings -> Startup -> General -> Boat Resolution -> High


Shutdownvideo:




AAF Olympic Atevio 7000 USB

Mil gracias a marce for link download

original post http://www.sat-universe.com/showthread.php?p=552419#post552419

Requirements:

To get E2 to Atevio 7000 required her to the following:

- A null modem cable (if PC / laptop no longer has access USB2Serial adapter works but unfortunately not all - if you saw Him gegenenfalls exchange extra worried)

- Network cable (for direct connection to PC / laptop using a crossover)
- AAF Recovery Tool 1.5 or higher
- E2 Flash Image / E2 USB Image
- Should be port 69 for the AAF recovery tool to be activated (in case of doubt (Windows) disable firewall during installation)

New Boot Loader Flashing:
1. AAF recovery tool to install
2. Box off and network and connect a null modem cable to the PC / laptop
3. AAF recovery tool to start and click on connect
4. Switch Box - the boot process should be interrupted if not see 4.1
4.1 It may happen in rare cases that the AAF recovery tool fails to interrupt the boot process. In this case, you need a terminal program such as Windows HyperTerminal or Putty
Putty / Hayperterminal set as in the image and click Apply.

Now turn right after repeatedly pressing the spacebar until the output looks like this:

That was then but already - now could end her Putty, start AAF recovery tool and click on connect.
5. Network parameters and click on "Save." (The Atevio box must be in the same network as the PC are!)
Who wants to change its MAC address should restart after changing the box so that the new address will be accepted.


6. Well above the tab "Maxi submarine Install" and click click "Install Maxi submarine rev 0.5.

- Should not fold the installation please check Check (Windows) or firewall settings (Windows-off) firewall temporarily.

7. Box shut down and switch before connecting again with the "connect"
- Now click on the tab Maxi bootdesc Defaults
- On the Set Default (click If a hard disk installed before selecting "Internal SATA)

Those who also still want to pick the default boot it from version 1.6 can now do the bottom too.
- For safety, the network parameters are all right in there we go again
on the first page of "Settings" and click "save"
8. Thus, the new boot loader would instlliert - now there are 2 ways to bring the box E2

9. E2 install the Flash
Who wants to test E2 on the stick reads on to point 10.
- Switch off the box
- Start AAF recovery tool and click on connect. (should not go to connect, see point 4.1)
- Click on the tab at the top Flash Image E2
- On "..." and click to select the image, memory E2
- Click on Flash E2 and loading - Receiver not turn

- E2 in Flash is now done and will start at the next reboot automatically.


9.1 The way back to the original image
If you the actual beta of E2 in the flash still not convinced you can, of course, any time back to the original

- Switch off the box and connects the network, and null modem cable to the PC / laptop
- AAF Recovery Tool Start, click connect and switch the receiver
(should stop the boot-time simply does not work when "E2 flash in the display is fast with the arrow keys to select on the remote control, the normal flash, resulting in a Softreboot and Recovery Tool connectet safe)
- Click on the tab "Recovery Image" and "Start"



Original 9.2 bootloader install
If anyone wants to have again the old bootloader from the factory setting, this is not a big problem

- Switch off the box and connect a null modem cable and network cable to the PC
- AAF Recovery Tool Start, click connect and switch the receiver
(should stop the boot-time simply does not work when "E2 flash in the display is fast with the arrow keys to select on the remote control, the normal flash, resulting in a Softreboot and Recovery Tool connectet safe)
- Click on the tab "Original U-boot Install" and "Install the original U-Boot 1.1.2 Click" - done!

If an error occurs Ping - the network settings can be written again in the bootloader and reboot.

10. E2 on USB stick install

Prerequisite:
- Installed Maxiboot 0.5 with default set bootargs
- USB Flash Drive
- AAF Maxiboot installer Atevio 7000

USB stick set up and install image
Install - AAF Maxiboot installer Atevio 7000
- Start AAF Maxiboot Installer
- Enter network parameters
- Receiver software start (if not already running)
- Click on connect

- By clicking the right mouse button on the stick and "Partinioning"

- Now create the desired partitions
MINI1
MINI2
...
SWAP (for flash image)

- Now click with the right mouse button on the partition on which the image is to be installed and click "Mount"
(If the drive has already been created, it may be among the E2, the partitions have been mounted)

- Then again, right-click the partition and on the "Install Image"

- Bestätitgen warning
- Choose to install Image
- Enter name
- Wait

- Finish can now turn directly to the desired image with the remote control (up / down are) elected and if it should be standard press the button with the red circle.
In order to have a clue where the partition is to be found
Here 2 examples:
Internal SATA HDD available:
sdb1 = S-USB1

No hard drive connected:
sda1 = USB1


Please also note
- Setting up and remove after installing a null modem cable to the receiver for cable plugged in to boot the receiver only when the PC is on.
- Provide for sound through HDMI into the A / V settings SPDIF as the audio source

- E2 The image is still at a very early beta stage so that you may experience some problems.

Mil gracias sofatester for test and manual

Utilities, Manuals, others Atevio AV 7000 HD PVR valid for this image in Octagon SF-1018 Twin HD Linux

here http://www.sat-universe.com/showthread.php?t=159562



Y mil gracias AAF board always great woork

AAF Olympia Image Atevio 7000 Flash version


Download

&

Atevio E2 Installation

Guide English V1.1