Sat-Universe Feeds Plugin(BissFeedAutoKey )

selseli · May 16, 2019

momi133 said:
ok! Does softcam restart auto or not? please test again.

I tried many times but it does not restart automatically.

Just as a suggestion to enter CW manually, it will be better to have a touchpad appear on the screen as shown below.

https://www.photobox.co.uk/my/photo?album_id=5635545414&photo_id=501866226939

selseli · May 16, 2019

Sataday said:
I can't get the plugin to install.
I'm putting it in tmp, and install local extensions, but It's not installing. What am I doing wrong?

If you try to install v1.1 directly you will have that problem. First install v 1.0 then upgrade to v1.1

vakula · May 16, 2019

OK
Just switched from openPLI to Pure2 => everything fine. Showing full info

So the problem is in openPLI.
Please, fix that

Sataday · May 16, 2019

Working on openvix.
but no info
and no auto restart.

momi133 · May 16, 2019

Peugeot 207 said:
OK
Just switched from openPLI to Pure2 => everything fine. Showing full info
So the problem is in openPLI.
Please, fix that

I write this plugin with pli version 6 but I now test in new version 7!

Sataday said:
I can't get the plugin to install.
I'm putting it in tmp, and install local extensions, but It's not installing. What am I doing wrong?

I fix the installation error!Please don't forgrt to send reason of error!

I'm testing in pli7 and new version will be released soon!

Thanks very much for testing plugin!

momi133 · May 16, 2019

openPLI 7

if it's possible, admins allow me to edit first post and I can place new version in first post!:thum:

Sataday · May 16, 2019

Tried to update to 1.1 but get the following message when trying to install.

WS460 · May 16, 2019

SF4008 with SatDreamGr 6
When pressing OK the button popup showed that CW was found and Oscam restarted automatically. The channel was decrypted.

But I had no full info, only the pic with the name of the channel. Everything else works fine. Thanks a lot.

Adriatic22 · May 16, 2019

Thank you for excellent plugin.Works on DM800SE with Black Hole image,but no auto restart.How to have picons at the bottom of the plugin?

jan55 · May 16, 2019

@momi133
Thank you for excellent plugin to linux. :clapping:
Please if you can make a plugin to pc dvb-s card (dvb applic.) in windows7? :thum:
Thanks!!!

momi133 · May 16, 2019

New update 1.1 r2

Sataday said:
Tried to update to 1.1 but get the following message when trying to install.

New update 1.1 r2

Code:

--Fix ipk file: Removed Depends: nigma2 from control file, which was causing a dependency error during installation.; thanks to master G

Important Tip: In some Countries, user must use VPN to see #CW

Download: BissFeedAutoKey

selseli · May 16, 2019

momi133 said:
New update 1.1 r2

Code:

--Fix ipk file: Removed Depends: nigma2 from control file, which was causing a dependency error during installation.; thanks to master G

Important Tip: In some Countries, user must use VPN to see #CW

Download: BissFeedAutoKey

any news to fix auto restart issue on some boxes/images?
and what do you think about my suggestion regarding the screen for manuel CW inputting?

momi133 · May 17, 2019

Thanks for good tips

Adriatic22 said:
but no auto restart.

Several people test this option and work well! please check webif setting
in softcam config file.

Tips: when we change the softcam config file, we must restart softcam manually to apply changes.

Adriatic22 said:
How to have picons at the bottom of the plugin?

First and third picons are sat and biss picon! I have problem with sat picon and I will try to fix it.
Second picon is league or sport picon! I don't make picon for some league and sports then plugin show default plugin.

selseli said:
I tried many times but it does not restart automatically.

Just as a suggestion to enter CW manually, it will be better to have a touchpad appear on the screen as shown below.

https://www.photobox.co.uk/my/photo?album_id=5635545414&photo_id=501866226939

I can't see image!

WS460 said:
SF4008 with SatDreamGr 6
When pressing OK the button popup showed that CW was found and Oscam restarted automatically. The channel was decrypted.

But I had no full info, only the pic with the name of the channel. Everything else works fine. Thanks a lot.

Peugeot 207 said:
OK
Just switched from openPLI to Pure2 => everything fine. Showing full info
So the problem is in openPLI.
Please, fix that

Sataday said:
Working on openvix.
but no info

ok. I'm trying to fix it for some images! Solving this bug is very simple but it confuse me! problem is that plugin image is placed over the infos and infos are not visible but are exist!

Sataday said:
no auto restart.

Please check webif settingin softcam config file.

Tips: when we change the softcam config file, we must restart softcam manually to apply changes.

Thank you for good tips!:thum:

team25 · May 17, 2019

can someone give a ready oscam config file?

selseli · May 17, 2019

momi133 said:
I can't see image!

momi133 · May 17, 2019

virtual keyboard

selseli said:
any news to fix auto restart issue on some boxes/images?

Please type 127.0.0.1:8888 in browser! what do you see?

selseli said:
what do you think about my suggestion regarding the screen for manuel CW inputting?

For manual CW inputting, there are two ways:
1-input box: user can input CW by remote control
2-virtual keyboard: user can input CW by a touch-pad screen.

I design this virtual keyboard and this option is added in next versions!

selseli · May 17, 2019

momi133 said:
Please type 127.0.0.1:8888 in browser! what do you see?

I understand you suggestion but i cant see uploaded image!

For manual CW inputting, there are two ways:
1-input box: user can input CW by remote control
2-virtual keyboard: user can input CW by a touch-pad screen.

I design this virtual keyboard and this option is added in next versions!

When I type 127.0.0.1:8888 I see an error page.

Yes my suggestion is a "virtual keyboard" which can be seen on above messagge.

momi133 · May 17, 2019

Sorry for my late replying your message

shishmish said:
@momi133
Thank you for excellent plugin to linux. :clapping:
Thanks!!!

@shishmish
Sorry for my late replying your message. I'm so sorry! I have a great liking for you and your works!:9111:

shishmish said:
@momi133
Please if you can make a plugin to pc dvb-s card (dvb applic.) in windows7?

I have a dvb-card TBS5520SE now (qbox s2 usb before this) and i work with dvb players in 10 years ago! I'm very interested to work with dvb softwares, but I'm not expert to make and write dvb-player plugin.Also i haven't enough time because of my lifestyle(especially because of my family ).

You are very expert to do that! and if you want, I can help you to make a similar plugin for dvb players.
why don't you(and other users that create plugin) educate users to make and write a plugin for dvb players?
Plaese create a topic and make a tutorial for this!

momi133 · May 17, 2019

127.0.0.1:8888> softcam page

selseli said:
When I type 127.0.0.1:8888 I see an error page.

Browser must shows your softcam page like below image:

momi133 · May 17, 2019

X-Skin Black skin of DVBViewer

momi133 said:
@shishmish
I have a dvb-card TBS5520SE now (qbox s2 usb before this) and i work with dvb players in 10 years ago! I'm very interested to work with dvb softwares, but I'm not expert to make and write dvb-player plugin.

But i have an experience in editing infobar of X-Skin Black skin of DVBViewer!

Sat-Universe Feeds Plugin(BissFeedAutoKey )

selseli

Registered

selseli

Registered

vakula

Sataday

Registered

momi133

Senior Member

momi133

Senior Member

Sataday

Registered

WS460

Adriatic22

Registered

jan55

Member

momi133

Senior Member

selseli

Registered

momi133

Senior Member

team25

selseli

Registered

momi133

Senior Member

selseli

Registered

momi133

Senior Member

momi133

Senior Member

momi133

Senior Member