Misselaneous-DM7000-Images

Status
Not open for further replies.

Rocknroll

Staff member
Administrator
Messages
6,174
SDT DaVinci 5.8

- Kernel 2.6.9 (with new sw 1_1_0)
- Enigma compiled 27/05/2006 - CVS modified by SDTeam
- Satellites.xml 19.05.2006 by Lyngsat
- WebIf 5.9.7-Expert-Enhanced (SDT)
- TuxTxt 1.98 (teletext)
- Tuxbox Commander v1.14fix (SDT fix)
- Movieplayer 0.8.1
- SDTboss Panel v2.7.1
- emuboss v2.9.7 (emumanager)
- SmartInit v1.2


New in DV 5.8:
==============

- factory software rel 1.1.0
New software version from DMM
Fixes many boot problems, and speeds-up booting of the box

- Tuxbox Commander v1.14 fix:
fixed *HUGE* memory leak of Tuxbox Commander plugin, which caused often an enigma crash
No more crashes here with Tuxcom! Great fix!

- EPG Wizard 1.4
fixed rare instance causing a restart of enigma when downloading epg

!!! WARNING - IMPORTANT DISCLAIMER:
!!! THIS FIRMWARE DOES NOT INCLUDE KEYS, NOR EMULATORS, NOR URLS FOR DOWNLOADING ILLEGAL STUFFS OF ANY TYPE.
!!! SATNEWS DREAMBOX TEAM IS NOT RESPONSIBLE IN ANY WAY FOR WHAT THE USERS WILL DO WITH THIS FIRMWARE.
 

Rocknroll

Staff member
Administrator
Messages
6,174
Neutrino

Neutrino.Dream v2 R109.1

v2.00/20060623

Kernel 2.6.9 Squashfs 2.2-r2 LZMA-Patch
version=2200200606232149
comment=ruDbox dream image
creator=ruDbox

**********************************************************************
Question: How to switch off RC-click beep?
ANSWER: Main Menu/Settings/Key Setup/Key click =on/off
**********************************************************************

2006 0623
added yWeb v2.1 (Let's try it!)

MoviePlayer.
-----------
added new function botton OK - channels-list output
if it not working try to stup new key for "Play"
it must be any botton but not OK

MHW-Epg.
-----------
Before You make a start, see /var/bin/realgetepg.sh and editing it for your choice.
1. Zapit to one of:
NOT TESTED! Canal+/CanalSatellite France : Astra 19.2E / 12363 V / 27500
NOT TESTED! Canal Digitaal : Astra 19.2E / 12515 H / 22000
NOT WORKING! Digital+ : Astra 19.2E / 10847 V / 22000
NEED MORE FREE SPACE AND MEMORY THAN DBOX2 HAS!Sky Italia : Hot Bird 13E / 12418 V / 27500
WORKING! Cyfra+ : Hot Bird 13E / 10719 V / 27500
2. Main menu->Scripts->Load MHW epg

Think about.
-----------
You can make your personal scripts for save and restore all epg, not mhw only.

sectionsdcontrol --saveepg /hdd/your_dir - save epg to /hdd/your_dir

sectionsdcontrol --readepg /hdd/your_dir - reading epg from /hdd/your_dir

Virtual Zap.
-----------
Settings->Misc settings->-------General-------Virtual Zap: ON/OFF

EPG Cash.
-----------
Settings->Misc settings->-------Epg settings-------
Be carefull with "Dir for epg cash"!!!
There is must be freespace on hdd or your mount-partion/directory named as /hdd/, /mnt/, /media/, /tmp/.
Example: /hdd/epg, /mnt/your_dir/epg, /media/your_dir .

Some changes on Channels-List under recording.
More big and small fixes and new bugs presenting for test.
 
Last edited by a moderator:

Rocknroll

Staff member
Administrator
Messages
6,174
SF Team Final

Linux Kernel 2.6.9
GCC 3.4.4
CVS 1.0.9. 27.2.2006
WEBIF 5.9.5 Expert with
- All/In/One Plugin Status
- Little Remote Control

Features
------------
Secure Channel SSH v3.5
DROPBEAR SSH Server v44
Crond+Crondtab
DynDNS Client
Firewall IPTABLES
NAT features
OpenVPN 2.05
HTTPD Web Server
WAP Support
Addon Update IPKG

Inside Addons
--------------------
Subtitler
Titul online
Teletext
Ngrab

All IPKG Addon downloadable direct to dream from All-In-One Plugin /Blue Button/
 
Last edited by a moderator:

Pietro60

Registered
Messages
12
Galileo Project 5.6 M (Azzurri d'Italia)

Loading in Flash and not multiboot; not contains keys no emu.
 

Rocknroll

Staff member
Administrator
Messages
6,174
Galileo 5.7 S

Basend on CVS by MikeV

Features:

Db Switch
Easylogo 1.2
Movieplayer
Satfind 3
Screencap
Switch Emulator
SwitchEmu
Teletext

No key No emu
 

Rocknroll

Staff member
Administrator
Messages
6,174
Juliet - Dreambox Edition

Linux version 2.6.9 (gcc version 3.4.4)
1.10 head.ko
Enigma cvs 08-08-2006
SmartEmu 3.0

Descriptions:

Advanced osd info with:

-Snr,Agc,Ber indications
-Frequency,Polarisation,Symbol
-Dynamic label to show screen info and current date
-Display hours:minutes:seconds
-ecm/emm support for the most used emus
-Providers name
-Two menus standard and Juliet edition (active it in panel, advanced opt., expert osd)
-Lite display on screen (active it in panel, advanced opt., expert osd)



Multiline skin 5 in three colors

-Blue
-Green
-Grey
-Available in 16/9 and 4/3 and extended and compact version
-Full compatible with picon multiline edition

Other features

Inadyn service configuration
SmartEmu 3.0 with independent start of cardservers and emu
MediaHighwayEpg embedded - saved on usb for now
Extended emu info
Internet download of plugins
Manual install available
Remove installed addons
SwapFile utility
HardDisk extra setup
Extended and lite multiline skin – designed by Mimi74 – SDT
Double main menu
EPG data stream pop advertisment
Expert web-if 5.9.7
Italian language
French language
Juliet Webif

For those who want to use the picon addons, just unpack the file and copy with ftp program to dreambox root, restart enigma
The TV 16/9 user must edit the picon.xml here:
/var/tuxbox/config and put 439 in y value


Notes:

This is our first dreambox image, any suggestion is really appreciated, please report any bug.
The epg pop can cause some problem, so if you have it please disable this feature from the extra osd panel.(blue key -> 1 -> extra osd setup)
The remove function will work only with suitable plugin, can happen that some is not.
We hope to make soon all plugins suitable.
The swap file utility is in a testing stage so may be you can find some errors.
We suggest to remove all swapfile on the device you would use before create the new one.
Enjoy

Disclaimer :

No key included
No softcam included
We provide this sorftware without any warranty and we're not responsible on the use you do with.
Cause technical problems (not enough time to test it) this image won't work in flash, hence don't use it.
Anyway, you can use it in multiboot in USB or CF without any problem
 

Rocknroll

Staff member
Administrator
Messages
6,174
Neutrino.DREAM Plus v2.01

Neutrino.DREAM Plus v2.01

Kernel 2.6.9 Squashfs 2.2-r2 LZMA-Patch
version=2200200606232149
comment=ruDbox dream image
creator=ruDbox

************************************************** ********************
Question: How to switch off RC-click beep?
ANSWER: Main Menu/Settings/Key Setup/Key click =on/off
************************************************** ********************

There is 2.01-version of Neutrino.DREAM for dreambox dm-70x0/500/56x0.
To continue our work we need feedback bug-reports.

32 bit colorset Neutrino for dm-7020/7000
new mode - auto-timeshifting for dm-7020/7000
OpenTV epg support(TPS)
redo some of infopanel and other places
added support user's icons(raw)- /var/share/icons
yWeb version=2.0.2 date=08.07.2006
and other fixes and hidden changes

************************************************** ********************
Question: How to switch on auto-timeshifting mode?
ANSWER: Main Menu/Settings/Recording/direct recording settings/Auto-timeshift start pause.
Set entry more than zero. 1 or 2 or 5... or 300.
Now at each zap channel record automatically will begin.
Auto-Record(files) of the previous channel will automatically delete at each zap channels.
Auto-timeshifting mode is a special mode of recording, but it can be switched on original record-mode.
Features menu/Auto-timeshift to basic record mode.
************************************************** ********************

************************************************** ********************
Question: How to get TPS-weekly EPG?
ANSWER: You must have Neutrino.DREAM v2.01
There is mustbe present /var/etc/tps.list.
Zap to FRANCE 5/10892.0 MHz V and Main Menu/Scripts/Load MHW epg.
Known problem - time to time you cant list EPG direct from infopanel or EPG Plus panel.
But it possible under press [red]botton any time.
Before You make a start, see /var/bin/realgetepg.sh and editing it for your choice.
On dreambox without HDD You can make your personal scripts for save and restore all epg, not mhw/otv only.
 
Last edited by a moderator:

Rocknroll

Staff member
Administrator
Messages
6,174
Dbc G2 1.0

enigma: 07.10.2006
Options: Expert WebIF, PrivateEPG

Supported languages: German, English

Buttons:

Red = EPG
2 x Red = EPG Selector
Green = Subchannels
Yellow = Plugins
Blue = Emu-Manager
2 x Blue = DBC Menu

Features:

DBC-Menu:
- Emu-Manager: Start & stop emus
- HDD-Manager: Timer-offset (seperat for beginn and end), HDD-Timeout, HDD-Acoustics, 'Go-To-Standby-Button'
- Addon-Manager: Installation of local .tar.gz- and .tar.bz2-addons as well as the uninstallation
- Swap-Manager: Swap handling
- Script-Generator: Generation of emu start-/stop-scripts
- LAN-Control integrated in Mounts-Menu

DBC Skin (based on a skin by ascha191) with:
- Cryptinfo
- Emu-info (current emu)
- video-info
- signal-info
- transponder-info

Thanks to all the testers for helping and making the image what it is now!
 
Last edited by a moderator:

tahir85pk

Super VIP
Messages
936
Juliet 2.0 - Dreambox Edition

JULIET 2.0 - DREAMBOX EDITION

Linux version 2.6.9 (gcc version 3.4.4)
1.10 head.ko
Enigma cvs 20-10-2006
SmartEmu 3.0

De******ions:

Advanced osd info with:
-Snr,Agc,Ber indications dynamic arrow and ber alert (red, orange, green)
-Frequency,Polarisation,Symbol Rate
-Dynamic label to show screen info and current date
-Display current time in the following formats HH:MM or HH:MM:SS
-Providers name
-Two menus standard and Juliet edition (active it in panel, advanced opt., expert osd)
-Picon flag (switch on and off) pictures are not included but downloadable in plugins section. blue->1->extra system setup
-New volume label (%vol) and new multicolors progress bar
-New event and snr/agc progress bar multicolors
-New Dynamic boot logo

Sept_quatre skin in height colors available for download:
-Dark and Light Blue, Green, Grey, Gold, Violin, Pink, Bronze
-Available in 16/9 and 4/3
-Full compatible with picon edition

Multiline 7 skin in height colors available for download:
-Dark and Light Blue, Green, Grey, Gold, Violin, Pink, Bronze (default)
-Available in 16/9 and 4/3 and extended and compact version
-Full compatible with picon edition

Other features:
-Inadyn service configuration
-SmartEmu 3.0 with independent start of cardservers and emu
-MediaHighwayEpg embedded you can chose the device where to save the .dat file (USB,CF,HDD) blue->1->extra system setup
-EPG data stream pop advertisment enable it from blue->1->extra OSD setup )
-Extended info (blue->3)
-PS – red key( show the list of active process)
-NetStat – yellow key (show the stat of the network connections)
-******s – blue key (you can run yours own ******s placed in /var/juliet/******s)
-Internet download of plugins
-Manual install available
-Remove installed addons
-SwapFile utility (if a swapfile is already present on the desired device you can use it)
-HardDisk extra setup (Noise Level and sleeptime)
-Double main menu (Classic style menu and Juliet style menu) you can select it from blue->1->extra OSD setup)
-Picon flag (switch on and off) pictures are not included but downloadable in plugins section. blue->1->extra system setup
-Sigboost included (switch on and off) blue->1->extra system setup
-Move var on removable device USB CF HDD (only for the image installed on the flash memory)
-Binding Emu, allow to bind a selected softcam to a service or a bouquet. You can set a default emu too. Active it from blue->1->extra system setup and then use the bind menu blue->2 in order to configure yours services.
-Expert web-if 5.9.7 powered by Mimi74
-Italian and english language (Others are downloadable from internet)

For those who want to use the picon addons, just download the file (available trough SmartEmu panel), then active the option from blue button, restart enigma
The position of the picon would be at the right place.

Notes:
Works on flash and multiboot for dm7000
Works on multiboot for dm7020

Disclaimer :
No key included
No softcam included
We provide this software without any warranty and we're not responsible on the use you do with.

here is url for downloading emus etc just ftp to /var/juliet
 
Last edited by a moderator:

Pattyren

VIP
Messages
1,885
RoCKYDeViL-dm7000

RoCKYDeViL-dm7000- Original DMM 23/11/06

--------------------------------------------------------------------------------

==========================================
! ^ ^ - ^ - ^ ^ ! ! ! ! !
! LuCiFeRSaT !
! D€ViLoP€R T€aM !
! v v - v - v v !
==========================================

==========================================

RoCKYDeViL-dm7000- Original DMM.img
cvs update 23/11/06

==========================================

--with-webif=expert
--with-epg=private
--with-mhw-epg=yes
--with-flashtool=expert
--with-reiserfs=yes
--with-ext-flashtool=yes
--with-enigma-debug=yes
--whith-pmt.tmp


=========---===ooo°>)O(<°ooo===---===========


CVS update:

- Install tuxcoms mp3-samplescript by Coronas

( var/tuxbox/config/tuxcom/mp3:

#!/bin/sh

# demoscript, starts mp3-files from TuxCom (only works in enigma)

# parameter 1: path to file
# parameter 2: filename

# replace spaces in URL
URL=`echo "$1$2" | sed 's/ /%20/g'`

# start mp3 playback
wget -q -O - "http://localhost/cgi-bin/zapTo?path=4096:0:0:0:0:0:0:0:0:0:$URL"


=========---===ooo°>)O(<°ooo===---===========





Good JoB!!!





By RoCKYDeViL
 
Last edited by a moderator:

Polar Bear

Registered
Messages
22
Polar Image Dm7000

POLAR IMAGE DM7000
============

Linux Kernel Linux version 2.6.9 (polar-7000@doppie)
(gcc version 3.4.4) #1 Mon Dec 04 18:40:38 CEST 2006
Firmware release 1.1.0, 04.12.2006
FP Firmware 1.06

Web Interface 5.9.7-Expert - Polar-Team edit by the Bear

Ecm info in Emu Panel
Many downloads via The Doppie Polar Cpanel
Like languages and lots of other stuff
/var to USB/HDD via Addon Manager and many more options
USB Settings
Harddisk Settings
Many new Skins to download via The Doppie Polar Cpanel, thanks to Mimi74
Picons download via The Doppie Polar Cpanel (Blue button)
Have a look in LCD when changing channel with Picons installed
The rest you will find out, as you use it.

!!! WARNING - IMPORTANT DISCLAIMER!!!:
!!! THIS FIRMWARE DOES NOT INCLUDE KEYS.!!!
!!! POLAR TEAM IS NOT RESPONSIBLE IN ANY WAY FOR WHAT THE USERS WILL DO WITH THIS FIRMWARE.!!!

Doppie and The Polar Team like to thank so many,
for help and testing. To many names, but you now who.
We also like to wish all our users a Merry Christmas and a Happy New Year.
We are a small Team, but we dont give up!.

Enjoy.
 

tahir85pk

Super VIP
Messages
936
NEW"Zombis DS nextstep_backup vom 13.12.06

NEW"Zombis DS nextstep_backup vom 13.12.06


---------------------------------------------------------------------------
-----
Hallo Leute !
Hier nun mein Backup des ds_7k_nextstep.img.
Dieses Backup ist vom ds_7k_nextstep.img 09.12.2006
Es ist von mir nur im Stick getestet nicht auf der HDD.
Das neue Backup zum runterladen ist dies zombis_ds-nextstep-13.12.06_multiboot.rar
Das backup ist 19 mb groß und braucht zur Wiederherstellung ca. 44,0mb

"WICHTIG"
-----------------------------------------------------------------
- Ich werde keinerlei fragen über Pre*iere mit Emu beantworten und auch keine Fragen über Karten die mit bestimmten Emus nicht laufen ich besitze keine karten mehr deshalb kann ich dies nicht testen.
- Das flexmenü wurde um einige sachen erweitert (zb. Werbezaper, swapfile einrichten, das örtliche (telefonauskunft) , verpaste anrufe (fritzbox abfrage) usw.)
-----------------------------------------------------------------

Ein NFS Server ist im image und wird beim hochfahren der box mit gestartet.
Die Option ihn per hand zu beenden ist im image auch drin , wer ihn nicht immer mitlaufen lassen möchte beendet ihn per hand übers userscript menü unter plugins.

-----------------------------------------------------------------

# Das image enthält: 8 Emus

1.Scam 2.5
“NEW” 2.Camd3 880
“NEW” 3.Evocamd v2.12+newcs v1.20
4.Newcamd 6.10+betad+cardserv
5.CamX 27.09.06
“NEW” 6.Mgcamd v.pre1.16 +newcs v1.20
“NEW” 7.CCcam 1.31 +newcs v1.20
8.Dreamcrypt (für orginal Dreamcrypt Karten)


# 55 Plugins+FlexMenü mit noch mehr Plugins:

01.FlexMenü
“NEW” 02.Tuxbox commander 1.15
03.Tuxmail P1.44 / D1.45 (man muß seine eigenen Daten eingeben sonst geht es nicht)
04.Dreamnetcast v1.0 ( internetradio )
“NEW” 05.Dreamripper (internetradio aufnahme)
06.New Tuxweter Plugin v3.14
07.Dreambox X Wetterforecast
08.Dreambox RSS Newsreader
“NEW” 09.Tuxtext 1.99
10.Dream Data 0.1.2
11.start streamingserver
12. stop streamingserver
13.MLB v1.15
14.VLC Frontend
“NEW” 15.Recordings.epl Creator v2.0
16.Multi Pic in Pic
17.Bild im Bild
18.I Have ADate
19.New Tuxcal P1.06/D1.07
20.MultiView EPG v3.52 auch über rote Taste abrufbar
21.Download Sky EPG
22.EPG Refresh
23.EPG Find v3.04
24.EPGui 2.6
“NEW” 25.WeekEPG 1.24
26.WebEPG v1.0
27.gSub config 1.08
28.Dreambox DrTic v2.0
29.DVB-Untertitel v0.42
30.RemoteTimer v2.0
31.Bitrate Viewer 1.2
32.LCD Circle
33.PhoneBook
34.Picviewer 1.14
35.Jukebox 0.64
36.CSG 1.3a Image Manager
37.Disk Space v1.01
38.Satfind LCD/TV
39.Satfind LCD
40.DVB Logger 2.6
41.LogCS 1.36
42.Scam Edit
43.AutoSwitch
44.DBSwitch
45.Sysinfo 0.8.7
46.Feeds Hunter
47.Tux Calculator (Taschenrechner)
48. MovieBrowserPlayer_v1_01
49.Wifi Plugin
50.Script Steuerungs Plugin (userscript)
51.PiconOffset zur Steuerung des Logos für die skins
52.Easy Logo v1.2
53.VNC Viewer
54.Language Preference (Audio vorauswahl)


# (Tuxmail und Tuxcal starten immer beim booten des image mit)

# Tuxcal und Tuxmail werden auch nach einem Standby ausgeführt,man sieht seine Termine und Geburtstage oder mail´s also auch nach einem Standby.


# 2 Sprachen Deutsch englisch

# 20 Games:+ TuxFrodo C64 EMU + Sinclair Spectrum Spiele Emu

1.lemminge
2.solitair
3.Pacman
4.Pacman 2
5.Tetris
6.Schiffe versenken
7.mastermind
8.minesweeper
9.Mühle
10. 4 gewinnt
11.Sol
12.snake
13.snake2
14.tankwars
15.walls (Raumschiffe abschießen)
16.Bloks (diamanten sammeln)
17.sokoban
18.Kniffel
19.Schach 1.A
“NEW” 20.Sudoku
20. TuxFrodo C64 EMU (Spiele müssen nach hdd/c64games )
21. Sinclair Spectrum Spiele Emu




# Settings sind für 2\1Diseqc 1.Astra 2.HB. voreingestellt aber ihr könnt ja eure einspielen.
-----------------------------------------------------------------------
Es ist wichtig das jeder seine Satellitenkonfiguration und seine Settings nach dem aufspielen des Backup macht.
Jeder hat eine andere Konfiguration und dadurch werden bei einigen keine Sender gefunden.
---------------------------------------------------------------------------
------------------------
# 3 Skins insgesamt ,da ich nur meinen geänderten Skins nutze wird es in meinen backups keine anderen Skins geben .
wer andere Skins haben möchte muß sie sich selber einspielen.



1/2.orginal multiline6_grey 4:3/16:9 skins

3. zombi_multiline6_16:9 von mir verändert mit Senderlogo anderer font´s und noch ein paar dingen.

LCD animation beim start ,große uhr usw.

Cifs,NFS und Samba sind im image enthalten und sind auch gleich einsatzbereit .

"WICHTIG"
---------------------------------------------------------------------------
-----
das backup ist eine .rar datei ,bitte erst mit winrar entpacken .
gleich vorab es MUß ein image mit dem LZMA-Patch im flash sein.

Instalation: mit Flashimage hochfahren danach FLASHWIZARD_6.3 starten, H_aken raus bei setting übername backupdatei einspielen und neu booten.



1000 merci a Zombi

Zombi is the best maker of backup for me



passwd for dezip : dreambox-zone.com

http://www.zshare.net/download/1-ds-...iboot-zip.html
 

Pattyren

VIP
Messages
1,885
satdream_dm7000_20061225

satdream_dm7000_20061225

25.12.2006
Kernel 2.6.9, netfilter support (firewall), LZMA patch.
Engima 3.3.0 by Gemini project.
iptables 1.2.11, ppp 2.4.3,pptp client 1.7.0
New plugins GPRS on Demand , Enable/Disables FireWall
USB / RS232 cables for mobile phones can be used based on profilic or ftdi chipset dongle.
Editable Firewall rules. Box now can use as router.
image md5sum 44606c6d2a6e0a7e5609c296d4cc306c
 
Last edited by a moderator:

Pattyren

VIP
Messages
1,885
AAF Merry Christmas Image for Dream 7000

AAF Merry Christmas Image for Dream 7000

Code:
Wir vom AAF Imageteam wünschen dir und deiner Familie schöne Weihnachtsfeiertage!
Zum Weihnachtsfest gibt es für euch ein neues AAF-CVS Image.
Die Installation im AAF Image unter Einstellungen /Internetupdate im Flashimage
oder Service Packs Flashaaf im USB Stick Image.
Viel Spaß beim Testen

Euer ImageTeam
1.1.0, 23.12.2006 für die Dreambox 7000
Weihnachtsimage für Dreambox 56x0
__________________________________________________ ___________________

Es gab, wie bereits in einem Thread erwähnt,
zahlreiche Änderungen im neuen CVS!
Grund genug für das AAF-Team eine neues Imgae zu kreieren!

Das neueste Andys CVS kann von jedem AAF-Image ( mit intergriertem Addon-Manager)
sofort installiert werden.

Empfohlene Installationsweise für AAF-Images = Merry Christmas

1. im Addon-Manager unter Service Packs Flashaaf laden.
2. Blaue Taste und Flashaaf ausführen.
3. Flashimage im Bootmenü auswählen
4. Blaue Taste und Makeaaf ausführen

Es sind nun das neueste CVS im Flash und das neueste AAF im Stick installiert.

Hier nun im Detail,
welche Möglichkeiten der Image-Installation das AAF-Team anbietet!

1. Flashimage erneuern:

- Menü / Einstellungen / Experten / Softwareaktualisierung / Internetaktualisierung
Diese Variante kann nur funktionieren,
wenn bereits ein "neues" CVS (dieses) im Flash ist.
- Plugin Flashaaf aufrufen, dies funktioniert bei allen Andy Images,
das Plugin muss mit dem Addon-Manager installiert werden.


2. USB-Image erneuern, erweitern:

2a. aktives Image = Flash:
- makeaaf unter Plugins drücken
es wird ein komplettes CVS vom Server geladen und in den Stick installiert,
anschließend zu einem BuLi-Image erweitert.

2b. aktives Image = USB-Stick:
- makeaaf unter Plugins drücken
es wird das aktive Image zu einem Xmas-Image erweitert.


Das besondere daran:
wenn jemand ein neues CVS laden will
und sein "altes" Xmas weiter im Stick lassen möchte,
kann das Flashimage mit Punkt 1 erneuern,
alle Einstellungen werden aus den Flashimage übernommen,
inkl. Bouqets.

Flashwizard wird nur mehr zum formatieren des Stick benötigt,
mehr nicht!

was ist neu und wurde geändert:
- Multilanguage bei der Installation
- verbesserte Stick Erkennung im Makeaaf
- verbesserte Prüfung ob I-Net OK
- Plugin Flashaaf
- hoher Komfort, kein PC notwendig

Der hohe Komfort den das Image bietet,
kann erst dann voll ausgeschöpft werden,
wenn die Box direkt mit dem Internet verbunden ist.
Andernfalls sind manuelle Installationen und Flashwizard notwendig.

Das AAF-Team wünscht euch viel Freude mit dem neuen Image!
__________________________________________________


__________________________________________________

Come da alcuni discorsi fatti in un precedente tema,e diverse modificazioni nella nuova CVS,abbiamo deciso di creare una nuova Image
La nuova Andy CVS si puó installare da qualsiasi AAF-image attrezzata di addons-manager.

Consigli per l´istallazine della AAF<=Merry Christmas :

1.Nell´Addons-manager sul service pack,caricare la Flashaaf.
2.Eseguire l´attivazione tramite tasto blú del telecomando.
3.Scegliere la flashimage nel bootmenü.
4.Eseguire tramite tasto blu del telecomando

Adesso avete installate la nuova CVS nel flash,e la nuovissima AAF nella penna USB.

A seguire le tante possibilitá che vi offre l´installazione del team-AAF

1.Aggiornamento della flashimage

-Menü/einstellung/experte/softwareaktualisierung/internetaktualisierung.Questo metodo funziona solo se avete gia la nuova CVS nel flash
-Plugin flashaaf aufrufen,Questo é possibile con tutte le image di Andy,il pluging deve essere installato con l´Addon-Manager

2.Penna USB aggiornamenti e aggiunzioni.

2a.Image attuale=flash
-premere makeaaf sotto plugins
in questo modo si carica un´image completa CVS dal server,e si installa sulla penna USB,per poi dopo trasformarla in una Xmas-image

2b.Attuale image penna USB
-premere makeaaf sotto plugins
in questo modo si trasforma l´image della penna in una Xmas-image.

I vantaggi di queste operazioni.
Se qualc´uno vuole caricare una CVS nuova,e vuole lasciare la vecchia buli sulla penna usb,puó aggiornare la flash-image come da punto 1,tutte le impostazioni compleso bouquets,vengono copiate automaticamente
praticamente il flashwitzard si userá solamente per formentare la penna USB.

Cosa é nuovo ed e stato cambiato
-Multilingua nell´installazione
-Aggiornamento del riconoscimento dello stick nel makeaaf
-Aggiornamento della prova di internet se é OK
-Plugin Flashaaf
-Alto confort,non si ha bisogno di un PC

L´Alto confort che vi offre l´image si puó sfruttare solo quando il box é collegato direttamente con internet,altrimenti é necessario usare il flashwitzard per le installazioni manuali.

Tutto il TEAM AAF vi augura buon divertimento con la nuova image.
__________________________________________________

Many changes in the new CVS, so the AAF-Team created this new Image !

This new Andy CVS can be generated from any AAF-Image (with Addon-manager)

Follows a recommended 'HOW TO' for AAF-image <= Merry Christmas

1. Load FlashAAF from Service Pack with Addon-manager
2. Execute Flashaaf with blue ***.
3. Choose Flashimage in Bootmenü.
4. Execute Makeaaf with blue ***.

The new CVS is now in flash and the newest AAF-image is on the USB-***

Follows a detailed list describing the features offered by this AAF-image

1. Update Flashimage:

- Menü / Settings / Expert / Software update / Internet. Works only with the new image in flash.
- Execute Plugin Flashaaf, work with all Andy Images, install Plugin with Addon-Manager.


2. Update/expand USB-Image

2a. active Image = Flash:
- makeaaf (Plugins)
A complete CVS is loaded from server and installed on the USB-*** it then gets transformed into a Xmas-image.

2b. active Image = USB-***:
- makeaaf (Plugins)
The active image is transformed into a Xmas-image.


What's so special about this ! :
All settings (including bouquets) are copied when someone loads a new CVS leaving his 'old' Xmas on his(hers) USB-*** using method (1)

Flashwizard will only be needed to format your USB-*** !

New/Better in this CVS
- Multi-language Installation
- Better support for USB-**** in MakeAAF
- Improved internet control
- Plugin Flashaaf
- No PC needed for installs !

These improvements are only available to those that have the box connected to the internet ! Else a manual install and use of Flashwizard are still needed

The AAF-Team wish you plenty of joy with their latest image !
__________________________________________________

Plusieurs modifications viennent de se faire dans le nouveax CVS, une bonne raison pour l'équipe AAF de créer une nouvelle image !

Le nouveau Andys CVS peut être installé depuis n'importe image AAF (avec Addon-Manager).

Mode d'installation recommandé pour AAF-image <= Merry Christmas

1. Executez FlashAAF (Service Packs) depuis le Addon-Manager.
2. Bouton bleu pour executer Flashaaf.
3. Choisisez Flashimage dans le Bootmenü
4. Executez Makeaaf avec le bouton bleu

Maintenant le nouveau CVS est dans la mémoire flash et la version la plus récente de l'image AAF est sur la clé USB

Suivent les possibilitées que nous offre cette nouvelle image:

1. Mise à jour image Flash:

- Menü / Options / Expert / Mise a jour / Internet
Cette fonctionalité n'est disponible que si le nouveau (celui-ci) CVS est installé dans la mémoire flash

- Executez le Plugin Flashaaf, fonctionne avec toutes les images Andy, Installez le Plugin (extension) avec Addon-Manager.


2. Mise a jour/Expansion de l'image USB:

2a. depuis Image en Flash:
- Executez makeaaf (Plugins)
Une image CVS complète est chargé depuis le serveur et installé dans la clé USB, ensuite elle est transformée en image Xmas

2b. depuis image en clé USB:
- Executez makeaaf (Plugins)
L'image active est transformé en image Xmas.


Les avantages !:
Quand on installe un nouveau CVS - en laissant la 'vielle' image BuLi sur la clé USB les bouquets et les parametres sont copié de l'image Flash si l'on travaille selon la méthode (1)

Flashwizard ne sert plus qu'a formatter une clé USB !

Nouveautés/Améliorations dans cette version CVS
- Installation Multilingues
- Meilleur support pour clefs USB en MakeAAF
- Amélioration contrôle internet
- Plugin Flashaaf
- Plus besoin d'un PC !

Ces avantages nécéssitent une connection internet fixe à votre dreambox, sinon une installation manuelle (et l'emploi de FlashWizard) reste obligatoire.

L'équipe AAF vous souhaite beaucoup de plaisir avec cette nouvelle image !

__________________ AAF Merry Christmas Image _________________

Jeder kann nun sein eigenes AAF-Image erzeugen!
Im Andy CVS 7000 ist ein Plugin, das aus einem normalen CVS ein AAF-Image macht!

Wer also aus seinem Andy-CVS ein AAF-Image erzeugen will, geht wie folgt vor!

- BLAUE Taste drücken
- MakeAAF auswählen
- nach 3 Minuten ist das AAF-Image fertig!
- immer letzter Stand vom Server
- Update aus den Flash und USB Stick möglich

Das AAF-TEAM wünscht viel Spaß mit dem neuen AAF -Image!
 
Last edited by a moderator:

Pattyren

VIP
Messages
1,885
dm7000_n32plus_v2.02_20070101

dm7000_n32plus_v2.02_20070101


Code:
Welcome to Happy New Year with Neutrino.DREAM Da Vodka Xmas!

Neutrino.DREAM Plus v2.02/Da Vodka Xmas edition/32bit-colorset
************************************************** ********************
**Audioplayer**Movieplayer**PictureViewer**TS MovieBrowser**Yweb**
**Live-veiw by web**Timeshift**Auto-timeshift per channels zap**
**Muiti-EPG: TPS/D+/Sky Italia/Cyfra+*EPG cash*TuxBox Commander**
**Support gotoXX/USALS commands for DisEqC 1.2 motors**
**Bouquet editor**Virtual Zap**Zapit options menu**
**Manual scan per frequency**Movie-cutter**
**Acoustics spectrum lcd-analyzer**Flexmenu**Tuxwetter**
Lockales: deutsch, dutch, english, french, hungarian, italiano,
lithuanian, polski, portugues, russkij.

file: dm7000_n32plus_v2.02_20070101.nfi
md5sum: 2DA1EF960224482B3F71EA403F0BB7AB

Kernel 2.6.9
version=2202200701010101
comment=ruDbox dream image
creator=ruDbox team

Original bootlogo by •Dream•Box•Busters•/ h**p://www.dreambox.co.yu

************************************************** ********************
Question: How to switch off RC-click beep?
ANSWER: Main Menu/Settings/Key Setup/Key click =on/off
************************************************** ********************

There is 2.02-version of Neutrino.DREAM/32bit-colorset for dreambox dm-7020.
************************************************** ********************
WE'RE USING Neutrino.DREAM AS BASE IMAGE ON DREAMBOX!
FLASHING IS SAME AS DMM-IMAGE.
NEUTRINO GUI DOES NOT SUPPORT CI-CAM.
************************************************** ********************
OUR Neutrino.DREAM Plus USING SPECIAL NEW CHANNELS-FORMAT SETTINGS.
YOU MAY TO EDIT CHANNELS-SETTINGS WITH DreamSet-EDITOR.
DreamSet - http://mmedit9800.tripod.com.
last update 28/12/2006 - DreamSet v2.10 or v.2.0
Special thank to John Vossos for great support nplus-format!
************************************************** ********************
THERE IS WE HAVE PRE-INSTALL FLEXMENU AND TUXWETTER.
That Flexmenü has a patch to ussing in Neutrino.DREAM Plus.
The original Tuxwetter, Flexmenü and scripts for dreambox:
www.i-have-a-dreambox.com
The original Tuxwetter, Flexmenü and scripts for Dbox2:
w**.keywelt-board.com
*Attention! Not all scripts will work by default.
************************************************** ********************
WHERE ARE YOU CAN DOWNLOAD OFFICIAL(rudbox team) Neutrino.DREAM IMG:
h**p://www.ump2002.net(Pilot-Alex), h**p://www.info-sat.org,
h**p://rudbox.da.ru, h**p://blackbox.my1.ru
************************************************** ********************

QuickStart.
-----------
1. Language Setup, Make your choice and press [Lame/Exit]
2. Main Menu, Settings, Network Settings, Make your choice and press [red]setup network now
3. Main Menu, Settings, Misc settings, Timezone, Make your choice
4. Main Menu, Settings, press [red]save settings now
5. Main Menu, Services, Zapit options, set necessary values and parameters, press [red]save settings
("Re-Zap on emu switch time"-parameter is recommended to put value 5 or 6!)
6. Main Menu, Services, Servicescan, set necessary values and parameters, Scan mode: Fast!,
press [red]save settings, start scan
7. Main Menu, Services, Video Settings, Video system: PAL/PAL-M/NTSC
8. Main Menu, Services, Audio Settings, English: off/on
(auto-switch on english-soundtrack if the "English"-name is present on the channels)

TimeShift settings.
-----------
1. Main Menu, Settings, Recording Settings, recording device: direct(file)/off/server
(set to "direct(file)" and set direct recording settings[green], [red]activate changes)
2. Main Menu, Settings, Key Setup, Timeshift, setup new key
(most of keys is not free to use by default, set fee-key(example,bouquet+-) or change non-free
to free before start to set timeshift-key)
3. Main Menu, Settings, Movieplayer Settings, Timeshift pause: on/off
("on" - timeshift starting record and stop movieplyer to pause, "off" - timeshift starting record
and play continue)
4. Main Menu, Addons, Emu Type, Camd: no/mgcamd/newcamd/camd3/scam
(Timeshift supporting mgcamd/newcamd/camd3/scam emu for crypt-channels,
we're using mgcamd+newcs on dm-7025)
************************************************** ********************
Question: How to switch on auto-timeshifting mode?
************************************************** ********************
ANSWER: Main Menu/Settings/Recording/direct recording settings/Auto-timeshift start pause.
Set entry more than zero. 1 or 2 or 5... or 300.
Now at each zap channel record automatically will begin.
Auto-Record(files) of the previous channel will automatically delete at each zap channels.
Auto-timeshifting mode is a special mode of recording, but it can be switched on original record-mode.
Features menu/Move timeshift to records.

Scripts.
-----------
Main Menu, Scripts
1. Backup your settings - store your personal neutrino settings to
addon files, so next time just upload addon_restore.bin for installing all settings.
2. Load MHW epg - Muitiepg loader/TPS/D+/Sky Italia/Cyfra+
Before You make a start, see /var/bin/realgetepg.sh and editing it for your choice.
Zapit to one of:
NOT TESTED! Canal+/CanalSatellite France : Astra 19.2E / 12363 V / 27500
NOT TESTED! Canal Digitaal : Astra 19.2E / 12515 H / 22000
WORKING! Digital+ : Astra 19.2E / 10847 V / 22000
WORKING! Sky Italia : Hot Bird 13E / 12418 V / 27500
WORKING! Cyfra+ : Hot Bird 13E / 10719 V / 27500
WORKING! TPS : Hot Bird 13E / 10892 V / 27500
3. Reset EPG
4. NOTIMEUPDATE
On different channels there is not an exact times. If there is a file /var/tuxbox/.notimeupdate
and the difference of more than 10 minutes, current time does not update.
5. Readme 1st/Image info

Default Keys(buttons)
-----------
1. [dream/menu] - Main Menu
2. [blue] - Features
3. [help] - channel info
4. [help][help] - channel EPG
5. [help][help][help] - channel EPG bigest font size
6. [help][help][help][help] - channel EPG normal font size
7. [info] - channel info (same as [help])
8. [video] - TS MovieBrowser
9. [audio] - Audioplayer
10. [green] - Select language
11. [red] - EPG Programm Information
12. [tv] at tv-mode - open clock on topleft, second press - close clock
13. [radio] at radio-mode - open clock on topleft, second press - close clock
14. [shift]+[radio] - saving live screenshot to /hdd/screenshots/channelname_programmname_yyyymmdd_hhmmss.bmp
(MTV2._[19E]_MTV2_S_100_TRACKS_OF_200620061231_141022.bmp)
15. [ok] - open channels-list
16. [ok]+[soundoff] - switch on dbv2000/channel-list mode
17. [shift]+[blue] - switch to standby mode and lock rc
18. [shift]+[tv] - lock scart
18. [red]+[unlock key] - unlock rc and scart
19. [shift]+[red] - switch on mini-mode: blocking main menu and features menu, second press - switch off
20. [soundoff] - del files and records

MovieBrowser special Keys(buttons)
-----------
[radio] - screenshot for record-logo
[shift]+[radio] - saving record screenshot as much as you have to press

Neutrino Movie-cutter.
-----------
Trimming-editing of the records material.

Mode-1. Set label " Movie end " for record (file).
Starting from this label the contents of record will be cut off
and thrown out" without of restoration.

Mode-2. Set labels " Movie start " and " Movie end ".
The contents of record between these two labels will be copied in a new file (record).
The original file (record) will not be changed.

Mode-3. Set label " jump over ".
If such label is installed, at usual viewing record the contents inside of a label is passed - ignored.
In our case the contents inside of a label will be written down (copied) in a new file (record).
Such labels inside of one record it is possible to set up to 10 and then we shall receive ten new records.
Differently the label " jump over " is a piece of record (file). Each of such pieces forms new record (file).
The original file (record) will not be changed.

Mode-4. Set labels " jump over ".
"Pasting" of all pieces in one record (file). The original file (record) will not be changed.

Arrangement of labels is carried out at viewing record in TS MovieBrowser by pressing the [blue]-button
and a choice of necessary type of a label.

Cutters Buttons on MovieBrowser.
-----------
[video] - Mode-1.
[audio] - Mode-2.
[text] - Mode-3.
[radio] - Mode-4.

Buttons fast rewind of record.
-----------
<1> - On 1 minute ago
<4> - On 5 minutes ago
<7> - On 10 minutes ago
<3> - For 1 minute forward
<6> - For 5 minutes forward
<9> - For 10 minutes forward
<2> - In the beginning of record
<5> - In the middle of record
<8> - In the end of record
PgUp - for 10 seconds forward
PgDown - on 10 seconds ago

Channels logo.
-----------
Picture types - JPG and GIF.
The recommended size - 52 x 39 points.
The storage directory of files -/var/share/icons/logo/.
File with a logo the name from values of three parameters is given.

/ts id/on id/s id/.gif

TS id = "042a" on = "0001" frq = "11739000" inv = "2" sr = "27500000" fec = "3" pol = "1"
S i = "6ff8" n = " MTV Hits. [19E] " v = "be1" a = "be2" p = "be1" pmt = "151" tx = "0" t = "1"/

Accordingly the file for the channel " MTV Hits. [19E] " should have the following name.

42a00016fee.gif

EPG Cash.
-----------
Settings->Misc settings->-------Epg settings-------
Be carefull with "Dir for epg cash"!!!
There is must be freespace on hdd or your mount-partion/directory named as /hdd/, /mnt/, /media/, /tmp/.
Example: /hdd/epg, /mnt/your_dir/epg, /media/your_dir .

Acoustics spectrum lcd-analyzer
-----------
For audioplayer play-mode.
Main-menu->settings->audioplayer->lcd a-spectrum - no/yes

Live-veiw from dreambox-web.
-----------
Before to start Live-veiw from dreambox-web:
install VLC http://downloads.videolan.org/pub/vi....8.x-win32.exe

Default cardserver and emu.
-----------
Newcs is default cardserver, mgcamd - emu.
************************************************** ********************
Question: How to activate mgcamd and newcs?
ANSWER: Cardserver newcs mustbe to activate/restart at first!
ANSWER: Main Menu/Addons/Cardserver: no->newcs /Restart cardsever
ANSWER: Main Menu/Addons/Camd: no->mgcamd /Restart camd
************************************************** ********************
Question: How to install camd3 or @box?
ANSWER: camd3 mustbe to added /var/emu as - camd3, pcamd to /var/bin as pcamd, othere files to /var/keys
ANSWER: @box mustbe to added /var/emu as - @box or camdd, othere files to /var/keys
Question: How to activate camd3 or @box?
ANSWER: Cardserver newcs mustbe deactivate at first!
ANSWER: Main Menu/Addons/Cardserver: newcs->no /Restart cardsever
ANSWER: Main Menu/Addons/Camd: no->mgcamd->...camd3 /Restart camd
ANSWER: Main Menu/Addons/Camd: no->mgcamd->...@box(or daemon) /Restart camd
************************************************** ********************
Please, remember that
"Re-Zap on emu switch time"-parameter is recommended to put value 5 or 6!
See QuickStart.
You can start recording the crypt-channel and...
and zap to next crypt-channel and to look it or to zap next and next, etc.
JUST SWITCH EMU TO MGCAMD AND START YOU RECORD/VIEWING!
Mgcamd mustbe present in image inside.

Dreambox Links Web Browser Keys(buttons).
-----------
dream -> menu, arrows up/down(urls), left-right - back/forward,
ok - Enter, help - page down, mute - page up,
colors buttons - mouse moving,
vol+ - mouse click, !Lame - exit, vol- - backspace
To change screen size - edit /var/tuxbox/config/links/screen.config

VNCviewer.
-----------
You can access your handheld desktop simultaneously from dreambox
over a network connection. RealVNC (http: // www.realvnc.com/) or
TightVNC (http: // www.tightvnc.com/) can be used as a server.
You must create config file, /var/tuxbox/config/vnc.conf

server=10.0.0.2
port=5900
passwd=test
scale=1

10.0.0.2 IP of VNC server, 5900 port of server, test - password,
1 - size per screen

More info - http://wiki.tuxbox.org/Plugins:VNCviewer


How to get updates and addons.
-----------
At first, dreambox must has internet-connection!
1. Main Menu, Service, Software Update, Updatemode: internet
2. search for new version...

How to install addons manual.
-----------
At first, our neutrino's addons is not same as enigma's addons!
1. Put addon-file(addon_name.bin) to /tmp
1. Main Menu, Service, Software Update, Updatemode: manual(ftp)
2. search for new version...
3. Filebrowser /tmp/, press to addon-file(addon_name.bin)
4. follow instruction

We have nothing against modifications to our Neutrino
images, if you follow our small conditions, namely:
1. The original Readme files must remain in archives with
your mod image.
The same counts to all readme and info files within the image.

How can you check who is original creator of the image?
There is information in file called ".version" in root
directory of every image.
Please, leave it also unchanged.

2. NO KEYS/RSA/ROM files within your renamed - modified image.
3. We are glad, NAME of our team(ruDbox) in file names of your
archives and mod image independently to see,
e.g. - ruDbox **** _mod_your_name or your_name_mod_ruDbox ***.

That's all.
Certainly you cannot follow our requirements and continue
everything like it is.
Believe, however, that attention of our friends who use
our private images is enough for us.

ruDbox Team
#dbox2 /Dalnet


Thankx to ruDbox Team
 
Last edited by a moderator:

Pattyren

VIP
Messages
1,885
Peterpan image for 7000

peterpan_image for 7000

14-01-2007 14:34


Description:

Peter Pan Neverland 1.0

Technical Info’s:
* Enigma from: 26.12.2006
* GCC 3.4.4 Original CVS
* 5.9.7-Expert by Humsat
* Busybox 1.0.1
* Tuxtxt V1.99

Function Buttons:
* BLUE - Peter Pan Menu
* YELLOW - Quick Button (Configurable)
* RED - EPG active channel
* 2x RED - EPG system Menu
* GREEN - Sub services

Features:
* Own addon server
* Image Special configured for Nordic users
Menus in Norwegian, Swedish, Danish, Finnish and English
* Multi EPG on all channels using MV/Mplug
All in its own Menu.
* Special adjusted Webif by Humsat
* Webif Integrated guides
* Own survey and guestbook available from Webif
* Subtitles integrated using gSUB by Gruffy
* Own Media Player Menu, CD/DVD
* Satellite settings for Nordic users on server
* Menu preview of Own skins before download from server
* Webserver Menu
* Hdd/usb/cf Menu
* Inadyn Menu
* User script Menu
* Backup / restore Menu
* Peter Pan Info’s Menu
* Quick button configuration Menu
* Scandinavian character set in Txt-Tv
* Mgcam / Newcs preinstalled

NO keys available in image or server.

Peter Pan Neverland 1.0 can be installed in
both flash or multiboot on DB7000/7020

The Peter Pan Team wishes all users good luck using this
image and we hope you'll be satisfied with what we have
come up to this time.

A special thanks to all contributors and beta testers.
 
Last edited by a moderator:

baloota

Registered
Messages
2,055
Original DMM 1.10 pre-release

Code:
Original DMM 1.10 pre-release.
Quote Ghost(translation from german to english):
If everything goes well,this is going to be the next officiall release image which will be uploaded to the officiall DMM website.
Drivers for the Boot-Problem users and many bugfixes are included.
 
Last edited by a moderator:

tahir85pk

Super VIP
Messages
936
SatDream_dm7000

SatDream_dm7000
17.02.2007
Addons dowload fixed
Kernel 2.6.9, netfilter support (firewall), LZMA patch.
Engima 3.4.0 by Gemini project.
iptables 1.2.11, ppp 2.4.3,pptp client 1.7.0, tcpdump 3.4
New plugins GPRS on Demand , Enable/Disables FireWall
USB / RS232 cables for mobile phones can be used based on profilic or ftdi chipset dongle.
Editable Firewall rules. Box now can use as router.
image md5sum a15dfd6c314efc62c8785a30ef65d14a

just to add : made in "mother Russia
 
Last edited by a moderator:

aitchala

VIP
Messages
1,394
Saltinux v 0.1 Image DM7000

Enigma CVS du 12.02.2007 :

--with-webif=expert
--enable-maintainer-mode
--with-epg=private
--with-mhw-epg=yes
--with-flashtool=expert
--with-reiserfs=no
--with-ext-flashtool=yes
--with-enigma-debug=yes

Modifications:

- Ajout de restart enigma
- Cacher Info-bar en mode radio et MP3
- Liste des plugins sur le bouton jaune.
- "Prefered plugin" sur le bouton bleu.
- Réorganisation des expert-setup par genre.
- Activation/Désactivation de dropbear dans l'expert setup.
- Activation/Désactivation de dccamd dans l'expert setup.
- Congiguration du Disque dur
- Nouveau design pour la Web-if

Fixé:

- Activation/Désactivation de samba depuis l'expert setup
- Montage auto de la CF sur les 7020
- Locale fr.

Prefered plugin :
Le bouton bleu permet de lancer votre plugin préféré, faites un double-click dessus pour le configurer.
Par défaut, il lance le Flexmenu d'Elreydelaplaya2003.

Remarques :
Si vous activer dropbear, il faut redémarrer la Dreambox pour qu'il fonctionne.
La création des clés rsa et dss prendra un certain temps, soyer patients.

Astuce pour Lancer/Arrêter Samba :
Désactiver puis réactiver le réseau après avoir Cocher/décocher activer Samba

Fond radio, MP3 et scan :
Tirés de fonds d'écrans réalisés par Ayo (encore merci �* lui)
 
Last edited:

Pattyren

VIP
Messages
1,885
dm7000_n32plus_v2.03_20070306

dm7000_n32plus_v2.03_20070306

Neutrino.DREAM Plus v2.03 dm-7000 /32bit-colorset. **Audioplayer**Movieplayer**PictureViewer**TS MovieBrowser**Yweb**Live-veiw by web**Timeshift**Auto-timeshift per channels zap**Muiti-EPG: TPS/D+/Sky Italia/Cyfra+*EPG cash*TuxBox Commander**Support gotoXX/USALS commands for DisEqC 1.2 motors**Bouquet editor**Virtual Zap**Zapit options menu**Manual scan per frequency**Movie-cutter**Acoustics spectrum lcd-analyzer**Tuxmail**Tuxcal**VNCviewer**Flexmenu**Tu xwetter**Lockales: deutsch, dutch, english, french, hungarian, italiano, lithuanian, polski, portugues, russkij. ruDbox Team #dbox2 /Dalnet

check read me for all infos

Thx to ruDbox Team
 
Last edited by a moderator:
Status
Not open for further replies.
Top