Ccam2104 Config help on TM9100

C

cl163

Registered
Messages
23
I used Telnet, typed in CCcam_2104 -dv and got loads of Red lines.Where can I find a working config file or how do I reconfigure it. When I used Smartcard setup info in Blue panel, I kept getting no/tmp/ecm
 
B

Brummie

Staff member
Administrator
Messages
5,794
use an ftp prog like DCC, and ftp to var/etc you will find it in there under connections, something like this.

C: blabbla.dyndns 12000 bla bla
 
C

cl163

Registered
Messages
23
I have used DCC296 to connect to the box.However, I could only see the PC folders on the right hand side, but nothing in the TM9100 folder on the left hand side. Under Commander, I got /etc which then changed to /mmt, and at the bottom it says: FTP component not ready
 
Ferret

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,501
DCC wont connect to a TM9100 image if the password is blank the UR image spring to mind.

If thats the case for you give the UR image a Pass by telnet or with TCC.

Ferret
 
C

cl163

Registered
Messages
23
I have given it a password with TCC, and I could telnet the box OK. I need to access the cam config so that I can follow the tutorial,card type, expire date,etc.However, I get nothing at all under TM folder
 
Ferret

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,501
On the configuration tab of DCC what messages do you get when you try to connect?

You can use other FTP programs too for file editing. Cute FTP file zilla it does not need to be DCC.

Ferret
 
C

cl163

Registered
Messages
23
On the Configuration tab, under Protocol, I got: FTP connectec and Telnet Connected.
I then click on FTP tab,at the bottom I got:< 200 port Command successfully. Consider using PASV
<List -al
FTP component not ready
I'll try to download the other programs and give them a go
Thanks
 
Ferret

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,501
Ok mate

Try cute ftp and let us know how you get on!

Ferret
 
C

cl163

Registered
Messages
23
I managed to open cccam.cfg with CuteFTP. I am going to spend some time on it to figure things out. Cheers Ferret and Brummie.I'll speak to you guys soon!
 
C

cl163

Registered
Messages
23
I am using just cccam 2.1.3 in the Blue Panel at the moment.I editted the cccam.cfg in the folder var/etc and added as below, would it update the entitlements:
SERVER LISTEN PORT: 12000
INFO LISTEN PORT: 16000
HTML INFO LISTEN PORT: 16001
ZAP OSD TIME: 0
OSD USERNAME: root
OSD PASSWORD: password
SHOW TIMING: yes
MINI OSD: yes
DEBUG: yes
DISABLE EMM: NO
EXTRA EMM LEVEL: yes
SOFTKEY FILE: /var/keys/SoftCam.Key
AUTOROLL FILE: /var/keys/AutoRoll.Key
STATIC CW FILE: /var/keys/constant.cw
CAID IGNORE FILE: /var/keys/CCcam.ignore
LOG WARNINGS: /tmp/warnings.txt
BOXKEY: /dev/sci0 00 00 00 00
SERIAL READER : /dev/tts/0 smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/ttsUSB0 5500000

Please correct me if I am wrong.BTW what channel on 28.2 should I leave it on?
 
C

cl163

Registered
Messages
23
Yeah mate. I have tried ccam 2.1.3, 2.1.4 and cccam+NewCS. I could read the present entitlements, now I want to see if it will update. Thanks
 
B

Brummie

Staff member
Administrator
Messages
5,794
ok you need to add your boxkey

you need the serial number from the bottom of the original receiver its 17 digits long 16 on some boxes its on the bs*kb sticker.

right it down then go here
h**p://boxkey.exyucs.com/

put the serial number where its says so and click on generate.

you will get example BOXKEY: /dev/sci0 11 22 33 44

copy that and paste it in your cccam.cfg file insert the card chip down and restart your cam, if the receiver as 2 slots use the bottom one. :thum:
 
C

cl163

Registered
Messages
23
Hi guys
I have spent the last few days messing about with CCcam and NewCS trying to get my TM9100 to update my FTV card. When I used CCcam and NewCS web interface, I could read the card entitlements, but when I use CCcam_2103 -dv in DOS console, I kept getting "Card detect fail". If card was not detected, how come I got the entitlements in the first place.Another thing, EMM always reads (0). Please shed some light on this. Thanks!
 
C

cl163

Registered
Messages
23
After 1 week I succeeded in setting up my network using TM9100 (2 cards) as server and TM600 (1 card) as client, and it updated the card as well.I am posting my setup in case it might help someone with the same problem.I am using CCcam 2.1.3 for both boxes, making sure we go into the Blue panel and download CCcam 2.1.3 to start off, copy and paste CCcam.cfg over to the corresponding boxes,otherwise it won't work
For TM9100:
F: user1 pass1
C: 127.0.0.1 user1 pass1
C: 192.168.1.68 12000 server server yes
SERVER LISTEN PORT: 12000
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
SHOW EXTENEDED CLIENT INFO : yes
INFO LISTEN PORT: 16000
HTML INFO LISTEN PORT: 16001
ZAP OSD TIME: 5
OSD USERNAME: newcs
OSD PASSWORD: newcs
OSD PORT: 80
SHOW TIMING: yes
MINI OSD: yes
SERIAL READER : /dev/tts/0 smartreader+
SERIAL READER : /dev/tts/0 smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/ttsUSB0 6000000
DEBUG: yes
NEWCAMD CONF :no
DISABLE EMM: no
SOFTKEY FILE: /var/keys/SoftCam.key
AUTOROLL FILE: /var/keys/AutoRoll.key
STATIC CW FILE: /var/keys/constant.cw
CAID PRIO FILE : /var/etc/CCcam.prio
PROVIDERINFO FILE : /var/etc/CCcam.providers
CHANNELINFO FILE : /var/etc/CCcam.channelinf
LOG WARNINGS: /tmp/warnings.txt
BOXKEY: /dev/sci0

For TM600:
F: server server
C: 127.0.0.1 server server
C: 192.168.1.69 12000 user1 pass1 yes
SERVER LISTEN PORT: 12000
INFO LISTEN PORT: 16000
HTML INFO LISTEN PORT: 16001
ZAP OSD TIME: 5
OSD USERNAME: newcs
OSD PASSWORD: newcs
OSD PORT: 80
SHOW TIMING: yes
MINI OSD: yes
SERIAL READER : /dev/tts/0 smartreader+
DEBUG: yes
NEWCAMD CONF :no
DISABLE EMM: no
SOFTKEY FILE: /var/keys/SoftCam.key
AUTOROLL FILE: /var/keys/AutoRoll.key
STATIC CW FILE: /var/keys/constant.cw
CAID PRIO FILE : /var/etc/CCcam.prio
PROVIDERINFO FILE : /var/etc/CCcam.providers
CHANNELINFO FILE : /var/etc/CCcam.channelinf
LOG WARNINGS: /tmp/warnings.txt
BOXKEY: /dev/sci0
SERIAL READER : /dev/tts/0 smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/ttsUSB0 6000000
 
You must log in or register to reply here.
Top