Intelsat 38 starts @ 45 east

william-1

william-1

Feed Hunter
Messages
4,380
All Vivacom transponders have moved to Intelsat 38 except one 11477 V 30000 I have no signal for this transponder,

Later today I will Blind scan 45 east to see if this transponder has moved to a new frequency outside the 11450 to 11700 band that I have already scanned V & H or maybe it is too weak for me to receive,

Signals much much weaker here in the East of England from Intelsat 38,
City TV 11635 V 30000 = 65% SQ with 88cm dish & TM6902HD,
Other channels on 11513 V 30000 are breaking up with 52% SQ I used to get a much better signal with Intelsat 904 on this frequency,

I will check out 45 east with the 100cm next.
 
william-1

william-1

Feed Hunter
Messages
4,380
With my 100cm dish 11477 V 30000 has returned,
Much weaker signals here in the East of England with the new satellite Intelsat 38 on all transponders.

So it looks like the map on the right is more accurate :(
 
Last edited:
A

amin11

Registered
Messages
16
william-1 said:
With my 100cm dish 11477 V 30000 has returned,
Much weaker signals here in the East of England with the new satellite Intelsat 38 on all transponders.

So it looks like the map on the right is more accurate :(
Click to expand...

hi. it looks like we can receive this satellite in iran according to the map on the right.can you give me a frequency?
 
S

sattechtips

Registered
Messages
426
All your news reported in flysat are fake and your news is not current, moving to new satellite is postponed for february, now all transponders are on old satellite. Read last actual news.
 
S

sattechtips

Registered
Messages
426
Yes, but from your link information is from 22.01.2019 how you see.

http://www.vivacom.bg/bg/sat#ca-modul


Code: 
ОБНОВЕНA на 24.01.2019 г.:

Бихме желали да Ви информираме, че планираното преминаване на VIVACOM към IS-38 се отлага за месец февруари. Всички ползватели на услугата ще бъдат информирани своевременно чрез съобщение на екрана на телевизора, SMS и/или e-mail за точните дати и необходимите действия.

Little traslate,

Code: 
Updated on 24.01.2019

We would like to inform you the planned switch to IS-38 is postponed for February.

And freq 11477 on new satellite will be 11475 with fec 3/4, still now 2/3 and same signal from here east europe.

Sorry, but your info is false.
 
william-1

william-1

Feed Hunter
Messages
4,380
Signals much much weaker here in the East of England from Intelsat 38,
City TV 11635 V 30000 = 65% SQ with 88cm dish & TM6902HD,
Other channels on 11513 V 30000 are breaking up with 52% SQ I used to get a much better signal with Intelsat 904 on this frequency,
 
S

sattechtips

Registered
Messages
426
Here signal not change, if was switch to new satellite here signal must be many more strong from new satellite from east europe.
 
william-1

william-1

Feed Hunter
Messages
4,380
It would appear that both satellites are active & the changes in your link are now happening or have already happened today,

For correct reception of VIVACOM TV after January 25, 2019, 6:00 AM, customers using a CA module (not a VIVACOM satellite STB receiver) need to enter the following values ​​for modified transponder parameters and perform a new scan.

25.01.2019
11477

30

V

2/3

11475

30

V

3/4

25.01.2019
11513

30

V

2/3

11515

30

V

3/4

25.01.2019
11555

30

V

3/4

12520

30

V

3/4

25.01.2019
11635

30

V

3/4

11555

30

V

3/4
 
Last edited:
S

sattechtips

Registered
Messages
426
How i say they update information and posponed all freq for switch to new sat for february and they say will inform all client by email or by sms.

Nothing what more to discuss, all changes will happend february.
 
Last edited:
william-1

william-1

Feed Hunter
Messages
4,380
So going from your info above I have deleted all transponders & re-scanned the satellite,

My findings are the same as this morning:-
11477 V 30000 2/3
11513 V 30000 2/3
11555 V 30000 3/4
11595 V 30000 3/4
11635 V 30000 3/4

So the satellite transfer to IS-38 has happened as I am on the fringe I saw the drop in signal,

You will not see this drop in signal but further East in Iran they now have a better signal that they did before,

The fec correct modulation & frequency discrepancies will be corrected by the control center soon,

You fail to mention your country of origin so I assume it is Bulgaria if this is so then you will not have detected a change in signal that I did as you are dead center of the footprint & I am on the fringe.
 
Last edited:
S

sattechtips

Registered
Messages
426
Notthing happened all freq on old satellite, if was on new satellite how i say i will have up on signal, i dont have up on signal same as yesterday.
 
william-1

william-1

Feed Hunter
Messages
4,380
You will probably not notice a change in the signal as you are in the center of the footprint,

You should not believe all that you read the changes happened this morning 6.0 am your time,

The new parameters will be corrected soon re the info sheet in the link you shared,

http://www.sat-universe.com/showthread.php?t=105621&page=6

Intelsat 904 readings with 88cm dish on 14th March 2018

Intelsat-904 @ 45.1° east 11635 V 30000 City TV 79% SQ

Today 25th January 2019
Intelsat-38 @ 45.1° east 11635 V 30000 City TV 70% SQ

Information in your link:-

For correct reception of VIVACOM TV after January 25, 2019, 6:00 AM, customers using a CA module (not a VIVACOM satellite STB receiver) need to enter the following values ​​for modified transponder parameters and perform a new scan.
 
Last edited:
S

sattechtips

Registered
Messages
426
william-1 said:
You will probably not notice a change in the signal as you are in the center of the footprint,

You should not believe all that you read the changes happened this morning 6.0 am your time,

The new parameters will be corrected soon re the info sheet in the link you shared,

http://www.sat-universe.com/showthread.php?t=105621&page=6

Intelsat 904 readings with 88cm dish on 14th March 2018

Intelsat-904 @ 45.1° east 11635 V 30000 City TV 79% SQ

Today 25th January 2019
Intelsat-38 @ 45.1° east 11635 V 30000 City TV 70% SQ

Information in your link:-

For correct reception of VIVACOM TV after January 25, 2019, 6:00 AM, customers using a CA module (not a VIVACOM satellite STB receiver) need to enter the following values ​​for modified transponder parameters and perform a new scan.
Click to expand...


haha how i will not notice, when in old satellite they use 80cm dish, in new they say will use 60cm, because new sat will be more strong, from other source they already say, change will be on 1st february in 10am (8am uk time) please remove all shit info from flysat, this is false news.
 
william-1

william-1

Feed Hunter
Messages
4,380
Transfer to Intelsat 38 postponed,
https://www.flysat.com/is904.php

https://www.flysat.com/

I think there was a change for a short while early yesterday morning but it looks like they had some problems so had to abort the change over,

All signals back to previous readings here on Intelsat 904:-

11477 V 30000 61%
11513 V 30000 64%
11555 V 30000 73%
11595 V 30000 74%
11635 V 30000 74%
11675 V 30000 74%

SQ readings via TM6902HD + 88cm dish
 
Last edited:
You must log in or register to reply here.
Top