How to install hypercam. Small tutorial

Status
Not open for further replies.

juli13

Staff member
Administrator
Messages
10,194
How to install hypercam. Small tutorial


For those who still have trouble to install hypercam (ppc), here is the procedure that I use to iTgate (in EDG 4.4) but is generally similar for the other images. (But feel free to correct if necessary).

1 °

there are 3 versions of hypercam:
- The satellite that allows the use of cards TNTsat, C +, etc locally (without use of softcam.key or sharing)
- The tiny lite + sharing =
- The full = tiny + care softcam.key (in / var / keys)

2 °

to install automatically after you choose the version (eg tiny_install.tar), place it in / var / etc and rename it in install.tar. Then reboot and everything should be ok.

3 °

to install manually, here is the procedure:
Stop cam emu or in progress (CCcam, gBox, etc), unzip and unpack the hypercam chosen (see 1) you will find 1 file install (which is used to install the car and thus no longer anything manual) and 1 / var which itself contains 3 directories: / bin / keys (empty), and / lib. The simplest is to copy the / var on (not in) the / var of Deco and normally it will add new files and directories in the right places. (Otherwise, simply copy the entire contents of / bin / var / bin, etc).

4 °

to separate right (= attribute) 755 to / var / bin / hypercam. For others, 644 is enough.

5 °

reboot and check the Deco qu'hypercam runs well (ps command in telnet and normally there are 8 hypercam process). Otherwise, after stopping the cam emu or in progress (in telnet command killall -9 nom_du_process) hypercam launch by hand telnet (command: / var / bin / hypercam).

So, hoping to be complete and sufficiently clear.
 

DREAMROBERT

Registered
Messages
103
HI!

FOR INFO:

How-To 'Hypercam Softcam'
(Based on Hypercam 0.28 and officials images iTGate and TM)

Dreamrobert
 
Status
Not open for further replies.
Top