Welcome to this simplified explanation of the creative to run DREAMBOX 500S Rbdon Rotor
And the first thing you will not need your computer is a doorway of communication between Dreambox and computer input ETHERNET
This metal
And we need this cable Metal
First you have to have your driver will The entrance to the EHERNET
It is not available it holds from here
It is not available it holds from here
SPINNAKER
We now begin with the settings that we have to do and with Continued Yalsourp beneath
And where we have to enter the My Network
We were the amendments that the image beneath it
After that we are heading for the previous rom then to the
network card
We are your settings for the necessary
We now begin with the settings that we have to do and with Continued Yalsourp beneath
And where we have to enter the My Network
We were the amendments that the image beneath it
After that we are heading for the previous rom then to the
network card
We are your settings for the necessary
Should be the same data that you entered My Network same Dreambox
Please compensation 192.068.1.1 to 192.168.0.1
We have now completed the computer settings
Now we go to Settings Dreambox
We first push of a button from the menu choose Alermott control was sutep
Was exper setup choose to show us as the picture below it
And then decide, as the picture underneath
Remove the tag for DHCP and make the settings as the image underneath
After the settings you will notice that Dreambox automatically contact network card at around
And appears in the image on the left connect your new DreamboX
Now we go to Settings Dreambox
We first push of a button from the menu choose Alermott control was sutep
Was exper setup choose to show us as the picture below it
And then decide, as the picture underneath
Remove the tag for DHCP and make the settings as the image underneath
After the settings you will notice that Dreambox automatically contact network card at around
And appears in the image on the left connect your new DreamboX
cccam 2.1.4 Choose from among EMUS and activate the image beneath it also
And then you will have channel encoded according to the strength server
Last edited: