Dear All,
I have downloaded the loader am still looking for the bin file, I have connected the box to my Laptop so far and thats about it
.
Please help me on step by step since am very new into this.
All the best and many thanks in advance.:thum:
How to Upgrade
1. Use a cross connection(2-3,3-2 & 5-5)cable to upgrade.
2. Keep box in OFF(by switching ON/OFF from back pannel) or standby mode .
3. Open the latest loader application.
4. Configure port setting and browze the firmware file.
5. Press "Next" button , put your box in ON mode and wait for few seconds while downloading in progress.
6. Push the "Finished" button after successfully installation.
7. Make factory default,,,,,(optional)
8. To enable Emulation go to Menu and type 2020 and to disable Emulation type 2020 "CAS system disabled" message will apear.
9. Default Password is 0000
Latest firmware here
http://www.sat-universe.com/attachment.php?attachmentid=33342&d=1194832371