How To Insert Biss Keys & Constant CW Keys Manually From The Remote

Status
Not open for further replies.

maximo

Super VIP
Messages
588
Biss Channels Keys For Humax (With Remote)

To Add A new Key for Biss Channel

Go To Biss Codes
[Menu --> TOH --> Parser --> Ram Editor --> Press On Radio Key
Go To Empity Line
00000000000000000000
Press Ok
Write The Code
Press OK
done:thum:
with this you can insert cw keys too
but you got fill in two lines
hope will hep someone
 

keifra

Registered
Messages
235
Biss Keys

1. Get the Biss key of the channel you want to watch, the Biss keys are always made up of 16 digits, for example : Tv 8 Turkey on Turksat 42oEast (Biss key for Tv 8 Turkey is 1000000000000000).

2. Go on Tv 8 Turkey.

3. Press the ? button on your remote and a window with all the channel details will pop up on your screen.

4. Write down on a piece of paper the "Frequency", the "ServID" & the "PMTPID" of the channel in question, for Tv 8 Turkey the "Frequency" is 11830, the "ServID" is 1 & the "PMTPID" is 32.

5. Use this calculator to convert these numbers from Decimal to HEX : http://tinyurl.com/mq5cm

6. When these numbers are converted to HEX you will get the following : 11830 = 2E36, 1 = 0001 & 32 = 0020.

7. Now with your remote go to : Menu-->ToH-->Parser-->Ram Editor an press the Radio button.

8. Go on one of the lines which is empty i.e. all zeros.

9. Before you insert the key you have to shorten the Biss key from 16 digits to 12 digits, therefore split the key as follows :

1000000000000000

Remove the colored keys i.e. the 4th pair of keys and then the last pair of keys.

To explain myself better you have to remove always : the 7th/8th key & the 15th/16th key.

When you do this exercise you will have the following key : 100000000000.

10. Now Press Ok and insert the "Frequency" in HEX (2E36) then the last byte of the "ServID" in HEX (01), then the last byte of the "PMTPID" in HEX (20) and at last the Biss key. For example for Tv 8 Turkey you should insert the following 20 digit key : 2E360120100000000000.

11. When you have inserted the key as instructed above press "OK" and you would have inserted the Biss key for Tv 8 Turkey, hence you will be able to watch this channel when it is encrypted in Biss.

Constant CW Keys

1. Get the Constant CW key of the channel you want to watch, the Constant CW keys are always made up of 32 digits for example : Sex View Plus on Hotbird 13oEast (A recent Constant CW key for Sex View Plus was : 02BAB571D4FCFCCC4C4478081AB5804F - N.B. this is an old key therefore it is not active anymore, I am using it only to set an example).

2. Go on Sex View Plus.

3. Press the ? button on your remote and a window with all the channel details will pop up on your screen.

4. Write down on a piece of paper the "Frequency", the "ServID" & the "PMTPID" of the channel in question, for Sex View Plus the "Frequency" is 12360, the "ServID" is 14002 & the "PMTPID" is 402.

5. Use this calculator to convert these numbers from Decimal to HEX : http://tinyurl.com/mq5cm

6. When these numbers are converted to HEX you will get the following : 12360 = 3048, 14002 = 36B2 & 402 = 0192.

7. Now with your remote go to : Menu-->ToH-->Parser-->Ram Editor an press the Radio button.

8. Go on one of the lines which is empty i.e. all zeros an press the "OK" button of your remote.

9. If you have noticed unlike the Biss key the Constant CW key is made up of 32 keys, therefore you will have to use 2 lines instead of 1 line.

10. Before you insert the key you have to shorten the Constant CW key from 32 digits to 24 digits, therefore split the key as follows :

02BAB571D4FCFCCC4C4478081AB5804F

Remove the colored keys i.e. the 4th pair of keys and then the cosecutive 4th pair of keys up to the last keys.

To explain myself better you have to remove always : the 7th/8th key, the 15th/16th key, the 23rd/24th key & the 31st/32nd key.

When you do this exercise you will have the following key : 02BAB5D4FCFC4C44781AB580.

11. Now go on the first empty line, press the "OK" button on your remote and insert the "Frequency" in HEX (3048), the last byte of the "ServID" in HEX (B2), the last byte of the "PMTPID" in HEX (92) and at last the first 12 digits of the Constant CW key you have just worked out.

You should have inserted the following : 3048B29202BAB5D4FCFC

12. Press the "OK" button on your remote to save the key you have just inserted.

13. Go on the second empty line, press the "OK" button on your remote and insert again the "Frequency" in HEX (3048), the last byte of the "ServID" in HEX (B2), the last byte of the "PMTPID" in HEX (92) and at last the second 12 digits of the Constant CW key you had worked out previously.

You should have inserted the following : 3048B2924C44781AB580

14. Press the "OK" button on your remote to save the key you have just inserted.

15. If you have followed all the instructions mentioned above you would have inserted the Constant CW key for Sex View Plus, hence you will be able to watch this channel when encrypted with these keys.

N.B. THESE INSTRUCTIONS ARE APPLICABLE FOR THOSE HAVING FIRMWARE VERSION TOH 3.4 HOT v9.4 OR A MORE RECENT VERSION & THE CATONE v3.3 OR A MORE RECENT VERSION
 
Last edited:
X

xtrue

Biss key in humax with new CATone v3.3

New way to create biss key with new CATone v3.3 Here's how:

Example TET Channel (5°E) 11766 H 27500 3/4:
1- Frequency 11766 in Hex= 2DF6 use it all 2DF6
2- ServID 6110 in Hex= 17DE use DE
3- PMTPID 6110 in Hex= 17DE use DE
4- Official key eg 00 00 00 11 00 00 00 11 use 00 00 00 00 00 00 remove the 4th and the 8th byte like old days hehe.
5- So Biss key in example is : 2DF6 DEDE 000000000000

That's the new structure for biss in humax.

THX Hawana for info
 

mogembo

Registered
Messages
446
How To Insert Biss Keys & Constant CW Keys Manually From The Remote


Biss Keys

1. Get the Biss key of the channel you want to watch, the Biss keys are always made up of 16 digits, for example : Tv 8 Turkey on Turksat 42oEast (Biss key for Tv 8 Turkey is 1000000000000000).

You can look here for the latest available keys




2. Example Go on Tv 8 Turkey.

3. Press the ? button on your remote and a window with all the channel details will pop up on your screen.

4. Write down on a piece of paper the "ServID" & the "PMTPID" of the channel in question, for Tv 8 Turkey the "ServID" is 1 & the "PMTPID" is 32.

5. Use this calculator to convert these numbers from Decimal to HEX : _http://tinyurl.com/mq5cm (copy link without _ to your browser)

6. When these numbers are converted to HEX you will get the following : 1 = 0001 & 32 = 0020.

7. Now with your remote go to : Menu-->ToH-->Parser-->Ram Editor an press the Radio button.

8. Go on one of the lines which is empty i.e. all zeros.

9. Before you insert the key you have to shorten the Biss key from 16 digits to 12 digits, therefore split the key as follows :

1000000000000000

Remove the colored keys, the 4th pair of keys and then the last pair of keys.

To explain myself better you have to remove always : the 7th/8th keys & the 15th/16th keys.

When you do this exercise you will have the following key : 100000000000.

10. Now Press Ok and insert the "ServID" in HEX, then the "PMTPID" in HEX and at last the Biss key. For example for the Tv 8 Turkey you should insert the following 20 digit key : 00010020100000000000.

11. When you have inserted the key as instructed above press "OK" and you would have inserted the Biss key for Tv 8 Turkey, hence you will be able to watch this channel when it is encrypted in Biss.

Constant CW Keys

1. Get the Constant CW key of the channel you want to watch, the Constant CW keys are always made up of 32 digits for example : Sex View Plus on Hotbird 13oEast (A recent Constant CW key for Sex View Plus was : 02BAB571D4FCFCCC4C4478081AB5804F - N.B. this is an old key therefore it is not active anymore, I am using it only to set an example).



2. Example Go to Sex View Plus.

3. Press the ? button on your remote and a window with all the channel details will pop up on your screen.

4. Write down on a piece of paper the "ServID" & the "PMTPID" of the channel in question, for Sex View Plus the "ServID" is 14002 & the "PMTPID" is 402.

5. Use this calculator to convert these numbers from Decimal to HEX : _http://tinyurl.com/mq5cm (copy link without _ to your browser)

6. When these numbers are converted to HEX you will get the following : 14002 = 36B2 & 402 = 0192.

7. Now with your remote go to : Menu-->ToH-->Parser-->Ram Editor an press the Radio button.

8. Go on one of the lines which is empty i.e. all zeros an press the "OK" button of your remote.

9. If you have noticed unlike the Biss key the Constant CW key is made up of 32 keys, therefore you will have to use 2 lines instead of 1 line.

10. Before you insert the key you have to shorten the Constant CW key from 32 digits to 24 digits, therefore split the key as follows :

02BAB571D4FCFCCC4C4478081AB5804F

Remove the colored keys i.e. the 4th pair of keys and then the cosecutive 4th pair of keys up to the last keys.

To explain better you have to remove always : the 7th/8th key, the 15th/16th key, the 23rd/24th key & the 31st/32nd key.

When you do this exercise you will have the following key : 022BAB5D4FCFC4C44781AB580.

11. Now go on the first empty line, press the "OK" button on your remote and insert the "ServID" in HEX, then the "PMTPID" in HEX and at last the first 12 digits of the Constant CW key you have just worked out.

You should have inserted the following : 36B2019202BAB5D4FCFC

12. Press the "OK" button on your remote to save the key you have just inserted.

13. Go on the second empty line, press the "OK" button on your remote and insert again the "ServID" in HEX, then the "PMTPID" in HEX and at last the second 12 digits of the Constant CW key you had worked out previously.

You should have inserted the following : 36B2019202BAB5D4FCFC

14. Press the "OK" button on your remote to save the key you have just inserted.

15. If you have followed all the instructions mentioned above you would have inserted the Constant CW key for Sex View Plus, hence you will be able to watch this channel when encrypted with these keys.

N.B. TO BE ABLE TO INSERT BISS KEYS & CONSTANT CW KEYS FROM THE REMOTE YOU SHOULD HAVE INSTALLED THE TOH 3.4 HOT v7.5 FIRMWARE OR A MORE RECENT VERSION & THE CATONE latest
thansk to abbass
 

humax54

Registered
Messages
25
Humax biss key consist of 20 digits

The first four digits is the frequency in hex (11766 = 2DF6)

The second four digit is the SID (last two digits in hex, 6110 = 17DE use DE), PMTPID (last two digits in hex, 6110 = 17DE use DE)

The remaining 12 digigts are the first, second , third, fifth, sixth and seventh bytes (Byte = 2 digits)
 

rockie

Registered
Messages
8
calculator web-site is not there anymore

HI,
I can not reach the web-site who does the calculation to convert to Hex.
I need to convert to hex freq:11917 servID:1 PMTPID:256
also...... 11917 12 556

Thanks in advance.
 
Status
Not open for further replies.
Top