Bricked box
Hi all
Firstly thank you to all those who have replied.
Good news and bad news!
I have managed to flash the latest ABcom image onto the ipbox by using telnet.
Now when you switch on i still get the "*^$356*(*^%$" on the display and after a bit it displays "Start" and boots normally
Seems to be working fine!
I still cannot get into usb or serial upgrade so i can reflash uboot.
If i try to reflash uboot with telnet i get:-
Welcome to ABCOM Image
/ > cd /media
/media > echo usb_uboot.img >images
/media > update.sh /media /media/images
mtd device "/dev/mtd7"
work directory "/media"
remove useless file from tmp
make tmp root directory.
file:usb_uboot.img
base:usb_uboot.img
excute update program.
micom_init...
event open...
open mtd device...
get mtd info...
burn...
open image file... : usb_uboot.img
lseek...mmap...ok.
checking received image...
CRC32 OK
got uboot image.
erase 9ffc0000 - 9fffffff
MEMERASE: Invalid argument
Oops!!!.
Your system could NOT updated properly.
System cannot boot in next power up.
Try to update to DGStation official flash image with FlashTool.
unmount /media
Press power key to reboot the system.
I cannot connect to the ipbox with flashtool because i cannot get the box into flash mode.
hope this makes sense
Any help would be appreciated.
Regards