Powervu on 4.8E & 0.8W black screens

dog-man

VIP
Donating Member
Messages
2,377
My memory is failing me due to working some very long hours over the past week. I am exhausted!

I had to reinstall my oscam and settings after updating software on my vu ultimo 4K and have lost the ability to clear Powervu channels on these sats.

9E clears fine.

The keys are found but the screen is black. I have always been able to clear both of these sats until the s/w upgrade.
I should know what to do but due to excessive tiredness and sadly, old age, I am struggling to find the solution.

Stream relay is disabled. I am using the very latest Oscam-emu for my ultimo 4k and as I said, the keys are being found.
 

rmcf1902bg

Registered
Messages
145
This is my conf and every thing it's work

OpenPli 7.0

oscam.conf

[global]
disablelog = 1
disableuserfile = 1
usrfileflag = 0
maxlogsize = 10
preferlocalcards = 1
saveinithistory = 1
lb_mode = 0
unlock_parental = 1
initial_debuglevel = 2

[cs378x]
port = 12005

[webif]
httpport = 8081
httpallowed = 10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255,127.0.0.1

[dvbapi]
enabled = 1
pmt_mode = 6
au = 1
user = dvbapiau
boxtype = dreambox


oscam.server

[reader]
label = emulator
protocol = emu
device = emulator
disablecrccws_only_for = 0E00:000000
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,4AE1,0E00,1010,1FFF,5602
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800;1801:000000,007301,001101;0604:000000;2600:000000;FFFF:000000;4AE1:000011;0E00:000000;1010:000000;5602:000000
group = 1
emmcache = 1,1,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-g = 1
saveemm-s = 1
emu_auproviders = 0500:030B00;0604:010200;0E00:000000;4AE1:000011;1010:000000
auprovid = 000E00

[reader]
label = AFN
description = AFN-EMU
protocol = emu
device = Emulator
caid = 0E00
detect = cd
group = 1
emmcache = 1,5,31,1
emu_auproviders = 0E00:000000
auprovid = 000E00

oscam.user

[account]
user = dvbapiau
pwd =
disabled = 0
group = 1
au = 1

[account]
user = 2nd_box
pwd = 2nd_box
group = 1


SoftCam.Key


AFN

P 0900FFFF 00 6682CEBAE5D5EF ; AFN
P 0900FFFF 01 B9166B84D6FD31 ; AFN

P 9798A8F2 GROUP 0900 ; 11804 V, 9.0°E
P 0900 003E042A 440610E23210D9 ;EMM Key 9E
P 0900 004E0256 D3A527AB8A6EF3 ;EMM Key
P 0900 001798FE 05FE192DFDBFFE ;AFN Package 9E emm
P 0900 003E7E84 1B80AA69C85E8B ;EMM Key 9E
P 0900 0040FB14 E8E057D4A8CDE0 ;AFN Package 9E emm
P 0900 00417556 23E9286636DDB7 ;AFN Package 9E emm
P 0900 00538D4D 1AA997DD238A57 ;AFN Package 9E emm
P 0900 00538E82 E7C693625A4465 ;AFN Package 9E emm
P 0900 00544CE1 AB6A053EF67E7D ;EMM Key 9E
P 0900 00541E85 689F03A1EE5DA3 ;EMM Key 9E
P 0900 0057B90F 2C280A7807F63D ;EMM Key 9E
P 0900 005C379D D374275FBF4A0F ;emm key 9E
P 0900 005CDAEF FA1A2056882210 ;EMM Key 9E
P 0900 005D671E 33D2198933F018 ;emm key 9E
P 0900 005D98C0 0B6B74E5A632F8 ;emm key 9E
P 0900 005DA7B2 B2C0E911E1E3A6 ;AFN Package 9E emm
P 0900 005DC130 153DA9873BF5FD ;emm key 9E


Discovery 1°W
P 0080FFFF 00 E57F8EF25324FF ;Discovery
P 0080FFFF 01 878B7F9F1AF6A2 ;Discovery

P BF175115 GROUP 0080 ; 12303 V, 0.8°W
P ACE05CA0 GROUP 0080 ; 12360 V, 4.8°E
P 0080 00623910 D6795F87CC1CBC ;EMM Key
P 0080 0061CB56 DF1FA983F1986E ; EMM Key
P 0080 0053C199 6DAF8122F475F8 ; EMM Key
P 0080 005615CE 3413710D15C765 ; EMM Key


P 0053FFFF 00 96365F795B54FC ;4.8E, 12303 H
P 0053FFFF 01 01104AD73016C3 ;4.8E, 12303 H

P 63EF4376 GROUP 0053 ; 12303 H, 4.8°E
P 0053 00412E5E F1F22D50253008 ; EMM Key
P 0053 0024B5A6 159F14C861263F ;EMM Key
P 0900FFFF 00 6F1648F12FBE55 ; added by Emu Sat May 11 21:46:17 2019 UA: 001798FE
P 0900FFFF 01 184299978B2AAC ; added by Emu Sat May 11 21:46:17 2019 UA: 001798FE
P 0080FFFF 00 F8CB6A9F56E5A9 ; added by Emu Sat May 11 21:56:39 2019 UA: 005615CE
 

Rickk

Registered
Messages
2,375
you can omit your refuse settings
you post these settings several times
where is extended_cw_api?
what is the afn reader needed for?
why are emm`s blocked in the emu reader?
your attitudes are without meaning and understanding
maybe that works for them but i do not think so
your post from 12.9.19 has the same settings and the emm key the emu writes are still from 11.05.19

https://www.sat-universe.com/showpost.php?p=2037012885&postcount=1943

do without her posts the user nautilus has already pointed out
 

rmcf1902bg

Registered
Messages
145
you can omit your refuse settings
you post these settings several times
where is extended_cw_api?
what is the afn reader needed for?
why are emm`s blocked in the emu reader?
your attitudes are without meaning and understanding
maybe that works for them but i do not think so
your post from 12.9.19 has the same settings and the emm key the emu writes are still from 11.05.19

https://www.sat-universe.com/showpost.php?p=2037012885&postcount=1943

do without her posts the user nautilus has already pointed out

ok, sorry, i just want to help, sorry again
 

Rickk

Registered
Messages
2,375
ok, sorry, i just want to help, sorry again
this is not a problem for me, help is okay but we do not know yet where the problem lies and for this we need information to find the fault and to solve it
it does not help anyone to post their settings if he uses another system, mips, arm and so on and does not know how to handle it

the emms for afn and discovery exist?
yes emm keys exist look in the emm area
 

dog-man

VIP
Donating Member
Messages
2,377
Here are my config files. My softcam is clearly ok as the keys do update.

Oscam.conf.....

[global]
disablelog = 1
logfile = /dev/tty
preferlocalcards = 1

[cs378x]
port = 12005

[streamrelay]
stream_relay_enabled = 0

[dvbapi]
enabled = 1
au = 1
pmt_mode = 6
delayer = 60
user = dvbapiau
boxtype = dreambox

[webif]
httpport = 8081
httpallowed = 10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255,127.0.0.1


Oscam.server....


[reader]
label = lower_card
protocol = internal
device = /dev/sci0
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,3,15,0
ratelimitecm = 4
ecmunique = 1
ratelimittime = 10000
srvidholdtime = 2000
cooldown = 30,600

[reader]
label = upper_card
protocol = internal
device = /dev/sci1
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,3,15,0
ratelimitecm = 4
ecmunique = 1
ratelimittime = 10000
srvidholdtime = 2000
cooldown = 30,600

[reader]
label = Mainreceiver
protocol = cs378x
device = ip_adress_mainreceiver,12005
user = 2nd_box
password = 2nd_box
group = 1

[reader]
label = emulator
protocol = emu
device = emulator
disablecrccws_only_for = 0E00:000000
caid = 0500,0604,0E00,1010,2600,2602,2610,4AE1
detect = cd
ident = 0500:000000,007400,007800,021110;0604:000000;0E00:000000;1010:000000;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000FE
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE
auprovid = 000E00

Oscam.user.....

[account]
user = dvbapiau
pwd =
disabled = 0
group = 1
au = 1

[account]
user = 2nd_box
pwd = 2nd_box
group = 1


These days, I seem always too tired to think properly. My memory is awful and I do geniunely have some concern that it might be some form of early dementis. I bloody hope not. It could just be down to working long hours and lots of night shifts.
 

Adriatic22

Registered
Messages
216
Do not worry,is not dementia,you have to rest well.
Try to put this config

[global]
logfile = /tmp/oscam.log
nice = -1
preferlocalcards = 1
block_same_ip = 0
block_same_name = 0
ecmfmt = P:c: p:s:d:i:0 #ECM_L:l #CW=w HOP:j

[streamrelay]
stream_relay_enabled = 0

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
ecminfo_type = 1
user = dvbapi
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2
boxtype = dreambox

[webif]
httpport = 8888
httprefresh = 10
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
http_status_log = 1

and this

[account]
user = dvbapi
monlevel = 4
keepalive = 1
au = 1
group = 1

extended cw api for your box change to 1.Delete your oscam.config and oscam user and put this.
 

winston10

Registered
Messages
83
can there be a config for 4.8 powerview and 9e afn ? i can only get one or the other with different configs, do anyone have a afn config ?
 

IsN0G00d

Registered
Messages
31
0.8w discovery science powervu

Hello

I have dm800se (original) and i install openpli 4.0. I install OSCam r11572-798. I have sound and subtitles on discovery science but i have black screen. On logs say Science Europe HD [AFRTS (9.0E)]. I have the softcam.key on /etc/tuxbox/config and not to the /usr/keys. When i put it here i don't have sound. What have a wrong?

Thank you
 

Adriatic22

Registered
Messages
216
Hi IsNOGOOd
I also have a DM800SE orig,and I had a same issue only with discovery science when I had openpli 4.0.I think it was some driver problem,but openpli 4.0 has stopped supporting for DM800SE with date 31.12.2018.Now I have BH 4.7 image,and PV work without problems on Discovery Network channels on 4.8E and 0.8W.
 
Top