Biss key format for Az box

biss key imput

hi folks

I'm not too tech savy so be gentle please!

I use a technomate 5402hd which I manually enter biss keys in with ease.

I just bought an Azbox as i need to view the 4:2:2 feeds.I know the keys that I require but how the googly goo do I enter them? I can't find anywhere where to imput them? Is it just me or is this box hard to navigate?

any help please

Thanks

I'am in exactly the same situation, the only way I've come across thus far is entering the key in notepad along with sid and pid information and uploading to the box but I havent got a clue how to get this information. Surely there must be a simpler way like with other boxes.

There is a plug in that is just for BISS that can be downloaded into the AZBOX HD receivers using the original firmware. You would load it from the plug in section. Once you load the plug in you can manually enter the SID & PMT as well as the key. After you enter all that information reboot the receiver and if all is correct it will work. As far as a link to the plug in do a google search and you can find what address to put in the plug in section to get the BISS one.