Go Back   Sat Universe > Cams > Cam Files > Magic

Note: Visitors from certain countries might see in-text advertising(underlind words in posts) or pop-under ads.
It is only shown to unregistered visitors or members that haven't made any posts. So you can easily get rid of it.

World-Of-Satellite

Magic zum Matrix

Magic

Closed Thread
  #1  
Old 05-04-2009, 14:09  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
elgeneral's Avatar
elgeneral elgeneral is offline
 
Join Date: Feb 2008
Location: Munchen
Posts: 7,811
Thanks: 11,090
Thanked 35,785 Times in 6,998 Posts
Country: Country Flag
Default Magic zum Matrix

Magic zum Matrix

German Infos and soft

Translate wiht Google


How do I make a Magic Module Matrix Reloaded with the CAS 2

1. cas studio 6.8a
2. Cam Module button.
3. Click Cams Magic.
4. Matrix Reloded click.
5. Cam insert and delete everything.
6. Xilinx write "Matrix Cas"
7. Go and "MR 1180 bin download and click on Write.
And wait until finished.

How do I make a Magic Matrix Reloaded a module with the CAS 2

1. cas studio 6.8a
2. Cam Module button.
3. Click Cams Magic.
4. Magic Cam button.
5. Cam insert and delete everything.
6. Xilinx write Magic Cas "
7. Go Pentaplast and 1:11 am to load and click Write.
And wait until finished.

How do I make a Magic Matrix Reloaded a module with the CAS 2 and Penta 1:20 mbf file.
1. The program Cas Interface Studio 4.7.1 Open:
2. Click on the button "Magic Cams" and then again on "Magic Cam
3. The Cam and insert the data from the CAM to be read and displayed
4. Erase all the button press
5. After deleting the Xilinx must now file loaded werden.Drücke the Write button
and now select the file from Xilinx. In our case this means MAGIC.CAS File
after selecting the file will be loaded and transferred to the CAM.
6. Now open the file and Dreamload Flasch "TOSHIBA TC58FVT160AFT" to download and click Write.
7. The start address set to 10000.
8. At the Open File and load Pentaplast 1:20 mbf and Write.
9. If it is described in the module and plug the receiver Dreamload appears when the module rausziehen and again it should appear Pentaplast 1:20
10. Now, from the Matrix Reloaded MagicCam become one.


Your Magic Module since the last update only as "invalid CI module" of your receiver detected and it can not be programmed?

Here is the solution!

Their brews the Cas Interface 2 (USB connection) and the program "Cas Interface Studio 4.7.1.
Next we need the files
"Matrix.cas + zBmr1170.bin" for programming on Magic Matrix Module
or
"Magic.cas + and Penta 109.bin" Magic for normal module.

And now, go go!

Magic-module in the Cas Interface2 purely and stuck with the USB cable and PC.

Run the program "Cas Interface Studio 4.7.1" and then click on the icon "Magic".
Then we press the "Wizard" and the miracle can begin.
The first bodies we have a (Select type of Cam) Magic for Magiccam or matrix for Matrixcam (I Matrix set).
Then we load the Flash file e.g. "mr1170.bin" and the Xilinx File "Matrix.cas". Now we press on Next and then click Connect.
If the yellow-red dot on going green, it was the connection between Cam and program established.
Now we press on Next again and then to write, the program works. Now we wait until the message "Device successfully programmed" comes. Now press "ok" and the Magic Module Cas Interface2 taken and reinstecken.Receiver into the receiver on and wait until "Ci module initialization" terminated because ist.Siehe, Magic module is saved!


Thanks to Walo0_2
Attached Files
File Type: rar Penta.rar (2.44 MB, 338 views)
__________________
http://i.imgur.com/HInxQOQ.gif
Vu+ Uno4k
2x Vu+Duo2, Vu+Ultimo

Qviart Unic, Undro, Duo
Mvision HD 700L,PrismCube
BlackHole Fan
CCcam 2.1.3 Astra-HotBird full

The Following 6 Users Say Thank You to elgeneral For This Useful Post:
DIAB'LESS (23-04-2010), dragon6969 (07-08-2011), joby (08-03-2011), lefkos (25-01-2010), marokino08 (05-04-2009), satanik62 (11-04-2009)
Closed Thread


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 00:51.


Powered by vBulletin
Copyright ©2006-2019 - Sat Universe