How to Update Matrix Reloaded

Status
Not open for further replies.
X

xtrue

Smart Card download procedure:

1.- Select Ci menu->UCAS V3.0->Download.

2.- The messages "Erasing old data, please wait..." and "Insert card 1 or serial
dummy card" will be shown.

3.- Insert the first smart card and press Ok.

4.- The message "Card inserted, opening" is shown, and then
"Performing smart card download..."

5.- If several cards are used, the message "Download card completed.
Please, extract it" will appear after the first smart card has been downloaded.
Extract the Smart Card and press Ok. After that, the message
"Insert card 2" will be shown.

6.- Insert the next smart card and press Ok.

7.- After the last smart card is downloaded, the message "Download complete.
Copying image and re-booting" will be shown. If the new version of software
is not shown after 30 seconds, re-insert the module without any smartcard.
If, after re-inserting the module, it is not initialised, switch the STB Off and
On again with the module inserted.

Notes:

1.- If you experience any problem before starting the downloading, the message
"invalid card" is shown make sure you are inserting the cards in the correct order,
check that the first card is card one.Insert card one again and press ok.
You can also try inserting the module with the correct smart card already
inserted in the cam. In this instance, you don't need to press Ok.

2.- If the smartcard is extracted or it does not respond, a message will be shown.
Press Ok, and the next menu will be shown:
- Go on with current download
- Start a new download.
Select "Go on" in order to continue with the current smart card...
or select Start a new download to start with the first smart card
Then follow the instructions.
If you extract the module while a downloading is performed, you can continue
with the current smart card in the same way because this same menu will be
shown after selecting the downloading menu.



Serial download procedure:

Version 1.3 of Windows Downloading application must be used.

1.- Insert CAM with dummy card already inserted. After a while, a message
"This card is not valid for your..." will be shown. Press Ok.

2.- Select CI menu->UCAS V3.0->Download

3.- The messages "Erasing old data, please wait..." and "Insert card 1 or serial
dummy card" will be shown.

4.- The message "Card inserted. Openning" will appear. Then, as soon as
"Performing serial download" is shown, press "Download now" in the
Windows Downloading Application.
After a while, the message "Download complete. Copying image and re-booting" will be shown.
If the new version of software is not shown after 30 seconds,
re-insert the module without dummy card.
If, after re-inserting the module, it is not initialised, switch the STB Off and
On again with the module inserted.
 
Status
Not open for further replies.
Top