Dm920 dual dvb-c problem

bamba

Registered
Messages
36
Dear Colleagues!
Please help. Given a DM920 with a Dual dvb-c/t2 tuner (si2169c) and latest newnigma2 image. We would like to receive two different cable provider. First is connected to input 1, second is to input 2. When we scan input 1, it can find the corresponding channel only to 1st provider, and after scan input 2 it can find channels belongs to 2nd provider. The problem is that when we would like to watch channels from 2nd provider, box always use input 1 and there is no picture and sound. The channels on input 1 (1st provider) is working fine. How can we reach that in this case use input 2 to tune the channel provided by 2nd cable provider?
Both tuner settings are: only dvb-c active, dvb-t2 is inactive.
Many thanks for any help.
Regards,
 

EnoSat

Senior Member
Messages
1,952
if same frequency on both provider:
try fix cable.xml
if not progress
must manual update lamedb (manual change namespace)

if diferent frequency on both provider:
not known what box in lamedb defined next tuner input for DVB-C
 
Last edited:

bamba

Registered
Messages
36
Hi!
Thanks for your idea, but does not work.
First I created a new cables.xml, which contains independently the two providers frequency.
After that I modified the lamedb, changed one of the provider namespace from ffff0000 to ffff0001 in both section (transponders and services).
Unfortunately still not working. Always try to use the first input independent of the choiced channel.
Do you think this, or what manual update do you mean?
 
Top