Coolstream HD-1 EMU Firmware
- Thread starter tani1
- Start date
Hot Tuna 1.0.2 Image for CoolStream HD1
Hot_Tuna 1.0.2 Image
Based on 07/10/2009 img
emu manager inside
start restart stop
Mgcamd 1.34
Newcs
Oscam
-> telnet enabled
-> emu daemon load-unload emu
-> sample emu start stop scripts included
Unpack *.tar.gz
and put the img into /tmp
select update firmware via FTP (no via internet)
that's all
:thum:
Hot_Tuna 1.0.2 Image
Based on 07/10/2009 img
emu manager inside
start restart stop
Mgcamd 1.34
Newcs
Oscam
-> telnet enabled
-> emu daemon load-unload emu
-> sample emu start stop scripts included
Unpack *.tar.gz
and put the img into /tmp
select update firmware via FTP (no via internet)
that's all
:thum:
- Messages
- 10,198
Image of 06.10.09, with S02 and CccamServer support
11.10.2009
Image of 06.10.09, with S02 and CccamServer support
Have here views an image for people who only want to look found.
-It supports cards in card reader (6MHZ) such as an S02.
-In addition, you can feed the cccamd.list with their own data and can then access a CccamServer.
-The image supports Astra 19.2 and 23.5 degrees (who wants more should rename satellites.xmlold in / var / tuxbox / config file in Satellites.xml and reboot.
I know this is not the right way, but the beginning of time, especially for beginners in the field of neutrino / Linux mal ein.
11.10.2009
Image of 06.10.09, with S02 and CccamServer support
Have here views an image for people who only want to look found.
-It supports cards in card reader (6MHZ) such as an S02.
-In addition, you can feed the cccamd.list with their own data and can then access a CccamServer.
-The image supports Astra 19.2 and 23.5 degrees (who wants more should rename satellites.xmlold in / var / tuxbox / config file in Satellites.xml and reboot.
I know this is not the right way, but the beginning of time, especially for beginners in the field of neutrino / Linux mal ein.
- Messages
- 10,198
Image of 03.11.09, with S02 and CccamServer support
Have here views an image for people who only want to look found.
It supports cards in card reader (6MHZ) such as an S02.
In addition, you can feed the cccamd.list with their own data and can then access a CccamServer.
I know this is not the right way, but the beginning of time, especially for beginners in the field of neutrino / Linux mal ein.
Have here views an image for people who only want to look found.
It supports cards in card reader (6MHZ) such as an S02.
In addition, you can feed the cccamd.list with their own data and can then access a CccamServer.
I know this is not the right way, but the beginning of time, especially for beginners in the field of neutrino / Linux mal ein.
Revised image from 06.10.2009 with S02 and CccamServer support
Code:
Have here views an image for people who only want to look found. 8)
This image is based on the original image of 06.10.09 (for the maps is simply the best story)
It supports cards in card reader (6MHZ) such as an S02 and a few more: thumbup: (D02 / S01 / Arena .......)
In addition, you can feed the cccamd.list with their own data and can then access a CccamServer.
A few scripts implicating have come to the beautiful and small pictures .....
I know this is not the right way, but the beginning of time, especially for beginners in the field of neutrino / Linux mal ein. : thumbup:
So much fun with it and as I said just found ..... 8)
The level is the way:
Citation
Filesystem 1k-blocks Used Available Use% Mounted on
mtd2 28160 22296 5864 72% /
- Messages
- 17,767
10.11.2009
EMU Image for CoolStream HD1 (Based on the original image from 03th November, 2009)
EMU Image for CoolStream HD1 (Based on the original image from 03th November, 2009)
Code:
Image of 03.11.09, with S02 as well as internally 2-4 times Smargo OSCAM via external and CccamServer support
Have here views an image for people who only want to look found.
It supports cards in card reader (6MHZ) such as an S02 all over newcs 1.2 and passed on Mgcamd.
Then the OSCAM has come, this supports up to 4 Smargos (external USB card reader).
In addition, you can feed the cccamd.list with their own data and can then access a CccamServer.
I know this is not the right way, but the beginning of time, especially for beginners in the field of neutrino / Linux mal ein.
So much fun with it and as I said just found.
The level is the way:
Citation
Filesystem 1k-blocks Used Available Use% Mounted on
mtd2 28160 22296 5864 70%
This was achieved by deleting the two games .... play who wants to buy a game console
Under Menu / scripts implicating also a lot was added. Hard to measure temperature, liquid level display, tuner reset and so on.
The start channel is permanently set to a music station, and the drive is switched off in standby- Messages
- 10,198
A new update of 06.12.2009
THX TheDuke
Code:
Image of 03.11.09 HD + internal and 2 times Smargo via OSCAM newcs and one each external and CccamServer support
Have here views an image for people who only want to look found.
Will support the HD + cards in the card reader.
Then the OSCAM has come, this supports a Smargo (external USB card reader)
and the new newcs now supports Smargo's here a pre-programmed.
In addition, you can feed the cccamd.list with their own data and can then access a CccamServer.
So HD + internal card reader and two external Smargo's ..... for S02 / S01 / SRG and Orf Cards and who knows what's still going.THX TheDuke
Image from 18.12.2009 extended created with newcs Mgcamd OSCAM on 24/12/2009
Thx TheDuke
Code:
Will support the HD + cards via the internal card reader newcs.
Your S02 will be very well read in the external Smargo via newcs.
A patched OSCAM is also included but not configured. (still too much bugi) that supports the second Smargo (external USB card reader)
As always, you can feed the cccamd.list with their own data and can then access a CccamServer. () Up to version 2.1.1 without problemsThx TheDuke
- Messages
- 10,198
30.12.2009
Image from 18.12.2009 extended created with newcs Mgcamd OSCAM on 30/12/2009
So what you have for the boredom ..... including all of the update, it's here and there
THX TheDuke
Image from 18.12.2009 extended created with newcs Mgcamd OSCAM on 30/12/2009
So what you have for the boredom ..... including all of the update, it's here and there
THX TheDuke
Code:
http://rapidshare.com/files/327988482/backups30.12.09.rar
Code:
[B][COLOR="Blue"]Image vom 30.12.2009 erweitert mit Newcs Mgcamd Oscam erstellt am 01.01.2010[/COLOR][/B]
Habe hier mal ein Image für die Leute die nur schauen wollen gefunden.
Unterstützt wird die HD+ Karten im internen Kartenleser via Newcs .
Eure S02 wird sehr gut im externen Smargo via Newcs gelesen.(die newcs.xml muss hierfür angepasst werden)
Eine gepatchte Oscam ist auch enthalten aber nicht konfiguriert. diese unterstützt den Smargo (externe USB Kartenleser)
Die Oscam ist ausgeschaltet und wird eingeschaltet in dem man unter /var/etc/.oscam.aus umbenennt in .oscam
Wie immer kann man die cccamd.list mit eigenen Daten füttern und kann dann auf einen CccamServer zugreifen.(bis Version 2.1.1 ohne Probleme)
Die Emu´s sind auf dem Stand von heute oder gestern.
Ich weiß das das nicht der richtige Weg ist, aber mal gerade für Anfänger im Bereich Neutrino / Linux schon mal ein Anfang.
So viel spass damit und wie gesagt nur gefunden .....
Ach und für alle die die Bordsoftware nicht kennen , zum bedanken braucht man nur den Bedanken Button zu drücken und für Kretik den Antworten ButtonGracias a TheDuke
New Emu-Image from 17.01.2009
Thanks TheDuke
http://rapidshare.com/files/336854775/backups17.01.2010.rar
Quelle: link removed, sorry but can't allow them
Thanks TheDuke
http://rapidshare.com/files/336854775/backups17.01.2010.rar
Quelle: link removed, sorry but can't allow them
Image vom 21.01.2010 erweitert mit Newcs Mgcamd Oscam erstellt am 21.01.2010
Big Thanks to TheDuke
http://rapidshare.com/files/339001451/backups21.01.2010.rar
Quelle: coolstream reloaded
Habe hier mal ein Image für die Leute die nur schauen wollen gefunden.
Aktuelle Mgcamd 1.35 und die Newcs vom 08.01.2010 (Robby hat leider noch keine neue Oscam gemacht .... schade )
Unterstützt wird die HD+ Karten im internen Kartenleser via Newcs .
Eure S02 wird sehr gut im externen Smargo via Newcs gelesen.(die newcs.xml muss hierfür angepasst werden)
Eine gepatchte Oscam ist auch enthalten aber nicht konfiguriert. diese unterstützt den Smargo (externe USB Kartenleser)
Die Oscam ist ausgeschaltet und wird eingeschaltet in dem man unter /var/etc/.oscam.aus umbenennt in .oscam
Wie immer kann man die cccamd.list mit eigenen Daten füttern und kann dann auf einen CccamServer zugreifen.(bis Version 2.1.1 ohne Probleme)
Die Emu´s sind auf dem Stand von heute oder gestern.
Big Thanks to TheDuke
http://rapidshare.com/files/339001451/backups21.01.2010.rar
Quelle: coolstream reloaded
- Messages
- 17,767
Image vom 25.01.2010 erweitert mit Newcs Mgcamd Oscam erstellt am 26.01.2010
Thx TheDuke
Habe hier mal ein Image für die Leute die nur schauen wollen gefunden.
Aktuelle Mgcamd 1.35a und die Newcs vom 08.01.2010 Das aktivieren einer HD+ Karte sollte jetzt funktionieren.
Danke an mixvt
Unterstützt wird die HD+ Karten im internen Kartenleser via Newcs .
Eure S02 wird sehr gut im externen Smargo via Newcs gelesen.(die newcs.xml muss hierfür angepasst werden)
Eine gepatchte Oscam ist auch enthalten und konfiguriert. Diese unterstützt den Smargo (externe USB Kartenleser) mit einer HD+ Karte.
Die Oscam ist ausgeschaltet und wird eingeschaltet in dem man unter /var/etc/.oscam.aus umbenennt in .oscam
Wie immer kann man die cccamd.list mit eigenen Daten füttern und kann dann auf einen CccamServer zugreifen.(bis Version 2.1.1 ohne Probleme)
Die Emu´s sind auf dem Stand von heute oder gestern.
Thx TheDuke
- Messages
- 10,198
Hot-Tuna image for Coolstream HD1
Hot-Tuna image for Coolstream HD1 beta version 1.04 rc3
TNX to Hot Tuna team
DOWNLOAD IMAGE
Hot-Tuna image for Coolstream HD1 beta version 1.04 rc3
Code:
New Hot Tuna Img for Coolstream hd 1
beta version 1.04 rc3
emu manager inside to start/kill mgcamd & oscam
update with latest kernel before install
upload *.img into /tmp folder
and select instal by ftp on the menuDOWNLOAD IMAGE
Code:
http://www.zshare.net/download/7204733327db87e4/- Messages
- 10,198
04/02/2010
EMU image mod 25.01.2010 oscam newcs mgcamd1.35a
EMU image mod 25.01.2010 oscam newcs mgcamd1.35a
Code:
Coolstream image mod based on original image 25.01.2010
Release date: 03.02.2010
[B]
Changes:[/B]
* added: mgcamd 1.35a + config (emm-fix ... works with and "activates" HD+ cards)
* added: newcs
* added: oscam
[B]config is testet with:[/B]
- HD+ card in original card reader (CR)
- SRG card in alpha crypt 3.20
- ORF card in alpha crypt 3.20
- Diabolo 3.2 Underworld 1.89/Horizon 1.04
- T-rex Predator/Predasaur 3.80/2.40
* added in separate archiv-file: settings for 6 satellites via Diseq 1.1 and T90
1: 19,2°
2: 23,5°
3: 13,0°
4: 28,0°
5: 9,0°
6: 7,0°
... change settings to your needs pleaesimply update setting files via ftp in /var/tuxbox/config/zapitEMU image mod 25.01. newcs mgcamd1.35a keyupdater, 1x intern /1x externImage mod based on original image 25.01.2010
Release date: 06.02.2010
Changes:
* added: mgcamd 1.35a + config (emm-fix ... works with and activated HD+ cards)
* added: newcs
* including keyupdater ... thanx to minicat and redbull301
* intern HD+ / extern (smargo) S02
config is tested with:
- Sky card Nagra S02 in Alphacrypt CI
- ORF C84 card in Cryptoworks CI
* added in separate archiv-file: settings for 8 satellites via Diseq 1.1 and T90
1: 19,2°
2: 23,5°
3: 28,2°
4: 16,0°
5: 13,0°
6: 9,0°
7: 4,8°
8: 0,8°
... change settings to your needs please
simply update setting files via ftp in /var/tuxbox/config/zapit
Gracias a Samojede
Release date: 06.02.2010
Changes:
* added: mgcamd 1.35a + config (emm-fix ... works with and activated HD+ cards)
* added: newcs
* including keyupdater ... thanx to minicat and redbull301
* intern HD+ / extern (smargo) S02
config is tested with:
- Sky card Nagra S02 in Alphacrypt CI
- ORF C84 card in Cryptoworks CI
* added in separate archiv-file: settings for 8 satellites via Diseq 1.1 and T90
1: 19,2°
2: 23,5°
3: 28,2°
4: 16,0°
5: 13,0°
6: 9,0°
7: 4,8°
8: 0,8°
... change settings to your needs please
simply update setting files via ftp in /var/tuxbox/config/zapit
Gracias a Samojede
The a nox 0.1A
Test version. In my starts, but it's better to back the current firmware.
Basis: the original firmware 1.50 from 21.01.2010
Neutrino SVN rev 209 + my modifications
Changes to the original:
-orders in the file system
-lack of games
-lack of links
-hdd_power = 1
Polish-better location
-access to the server with add-ons
-hotplug-enabled labels
-you want to change / make labels for the ext3 file system
-option controlling fan behavior in the standby mode (on / off.)
remove the menu-installed add-ons
Menu Management-emulators
Mgcamd 1.35 +-plug to restart
-NewCS 1.20 RC13 + plug to restart
-beam information with information about the active emulator and conditional access system
-image of conditional access systems
Menu emulators have a turn in the Main Menu-> Settings-> Remote-> blue button. Just to add an item emulators. Will be available when you press the blue button 2x. Emulators installed on the server will not work, will soon throw new addons. Tuxbox Commander, although installed, is not working. Forgotten replace libfreetype. You can install the server and it should go. There is no need to install fanctrl, and even not to do so. I made nothing of a video, so do not play more formats than the original. I guess everything, I will add something to remember.
Gracias a nox47
Test version. In my starts, but it's better to back the current firmware.
Basis: the original firmware 1.50 from 21.01.2010
Neutrino SVN rev 209 + my modifications
Changes to the original:
-orders in the file system
-lack of games
-lack of links
-hdd_power = 1
Polish-better location
-access to the server with add-ons
-hotplug-enabled labels
-you want to change / make labels for the ext3 file system
-option controlling fan behavior in the standby mode (on / off.)
remove the menu-installed add-ons
Menu Management-emulators
Mgcamd 1.35 +-plug to restart
-NewCS 1.20 RC13 + plug to restart
-beam information with information about the active emulator and conditional access system
-image of conditional access systems
Menu emulators have a turn in the Main Menu-> Settings-> Remote-> blue button. Just to add an item emulators. Will be available when you press the blue button 2x. Emulators installed on the server will not work, will soon throw new addons. Tuxbox Commander, although installed, is not working. Forgotten replace libfreetype. You can install the server and it should go. There is no need to install fanctrl, and even not to do so. I made nothing of a video, so do not play more formats than the original. I guess everything, I will add something to remember.
Gracias a nox47