Receiver & Serial Port:
======================
Protocol implemented: SSSP/HSIC/TM Share/PC CSC ECM/HomeShare
Serial & FE support
===================
What's worked with FE & Serial ?
Internal Emulator
Cards Sharing
Cards Support
DVB Plugin
How To
======
First connect serial cable from box to pc (same used for flashing receiver)
1.On Receiver settings activate SSSP/HSIC/TM SHARE/CSC ECM or HomeShare
2.Run Fausto
3.Clic on Tab SERIAL
4.Select Serial Type (SSSP/HSIC/TM SHARE/CSC ECM/HomeShare)
5.Enter COM settings or use default values
6.Tick case "Show Datas" for showing incoming datas (PMT & ECM datas)
7.Press connect button
Config will be saved on FE Settings.ini file
To decode chanel correctly SSSP require PMT Datas
If at connection NO PMT Datas showed (Show Datas ticked) or no ECM incoming on Tab MONITOR (Show Datas unticked)
switch channel and PMT/ECM datas will come
There is no PMT Table receive under HSIC
About CSC
=========
It support 4 versions:
* Titanium /technocam
* Tiger t6
* Starsat
* Dreamsky
if ECM not comes from box:
1.Disconnect Fausto on tab SERIAL
2.Clic on tab SETUP
3.Choose CSC_Cas_Datas.cfg on file list
4.Press OPEN
5.Made changes following syntax & examples
6.Press SAVE
7.Connect CSC ECM again on tab SERIAL
Material Tested:
===============
Humax 5400 (patched with TOH - HOT firmware) & HSIC: Need to have card+S+emu in box config and emm block on
No problem found
Clarke tech 5000 HD no problem found all worked ok with SSSP
Goldvision patched ALI C with SSSP
Loader 3.0.7 06/05/2008
Main Code 1.0.1 06/01/2009
Default DB 1.0.2 16/07/2007
MCU Version 2.5.12 29/07/2008
Reported bugs on ALI Firmware
-----------------------------
1.Under Cryptoworks providers NO ECM sent by SSSP (Tested KingStone/orf package)
Modified cryptoworks keys under box keys editor with zeroed value (box internal emu)
PMT Sent on zap
NO ECM incoming for 0D0020/30 & 0D0504
To solve problem think ident must be removed on box keys list (NOT Tested)
2.Tested *** ECM concerning caid 09XX Viasat
PMT Sent on zap
NO ECM incoming
Worked 100% with old ALI firmware
Solution: Wait new firmware with fixes
3.Corrupted ECM incoming (not constant bug)
This ecm decoded by Diablo wireless & Fausto Card support
Same ecm NOt Decoded by SSSP, ECM Datas seem corrupted
Happen after zapping, not constant bug
03 -> Command
00 66 -> Data Len
15 9A 81 00 61 33 15 00 00 0E 00 DC BE 97 BD 94 01
91 F7 AD 40 BD C0 1C 8E F7 8A C4 7D 0F 6A F6 78 5E
78 23 94 13 C7 AA AF C7 40 61 BD FB C3 D5 F8 27 60
EF 48 AF EE BE 3E FF F7 F4 E0 9F 9F A6 66 E2 A3 23
9F 71 3F ED C3 E8 AC 8E EB B0 52 1E 1A 63 BE 83 08
5B D6 F4 2D 29 6D 18 A1 6E DB 84 08 BC 6F 23 5F 1C
To solve problem, switch back channel till work correctly
4.Wrong PID inserted on ecm (not constant bug)
PMT Datas
01 -> Command
00 37 -> Data Len
20 0A 06 3F 08 A0
01 00 06 54 00 00 81
05 00 19 E0 00 81 10
05 00 19 DF 02 26 10
05 00 19 E1 03 28 20
01 00 [15 F6] 00 [33 17]
01 00 [15 F4] 00 [33 15]
01 00 15 F7 00 A8 25
Incoming ECM with wrong pid in
03 -> Command
00 66 -> Data Len
[15 F6] 81 00 61 [33 15] 00 00 0E 00 85 D0 55 C7 76 DD
8B 65 CD 6A B1 66 28 79 22 88 A5 4E 3C 53 32 DC 4D
93 39 F4 D3 75 27 85 46 61 23 17 2A A8 06 68 BC 0E
59 FB 3F C7 24 46 74 19 00 DC 41 76 5B 7B BC F0 B9
CC FE 19 8B 9B E9 85 F8 95 9E 9C 33 F3 16 D8 BD E8
E9 EC D0 5B 5F C1 EF FC CE 9F EF 46 FF 99 E8 5A B1
This ecm decoded by my card mean ECM is for provid 003315 pid 15F4
NOT pid 15F6, cause on next ecm, provid is 3317 pid 15F6 like defined on PMT datas
Sending CW to box
F2 00 10 CC 79 63 A8 51 F8 DA 23 53 4D BF 5F F5 5F AC 00 ¬.
F1 00 02 15 F6 -> pid 15F6 selected
Next ECM coming correctly
03
00 66
[15 F6] 81 00 61 [33 17] 00 00 0E 00 CA 2F D6 89 CB 14
65 12 3F A2 32 8A D2 CE 02 CC 27 10 CE 26 2A 9F 6A
7C 3C FE 78 E1 E0 11 30 74 DE 4C B7 03 B2 E4 44 62
97 CE 6B 18 AD E0 42 A0 F3 B4 B8 23 D9 99 F9 F5 74
B1 22 DF D7 8A DE 47 8A A9 A4 65 3B 0E 95 5E 6B 43
F6 E3 63 19 C9 32 80 CC DD 71 95 CE B6 1F A0 1B 70
To solve problem, switch back channel till work correctly
(c) MASARE Team - Saoud007
