dvbuserhere
Registered
- Messages
- 8
Hello,
The CA diagnostic page of the STB showed the following string
6E736B20XXXXXXXXXXXXXXXXYYYYYYYY
I took 8 Y characters converted to HEX and added +80 to the first two digits to get the boxid (say ZZZZZZZZ). With this information the oscam was able to detect the card.
The next step is to get the correct INS7e. I tried the following combinations to get the 52 character string for INS7e but was not successful.
With the above combinations, oscam showed "No Entitlements" on the webif.
Does anybody know how can i get the INS7e?
The view card is marked P2 and the STB model is Mybox MBSN-H412
Please feel free to PM me.
STB look like this,
Thanks
The CA diagnostic page of the STB showed the following string
6E736B20XXXXXXXXXXXXXXXXYYYYYYYY
I took 8 Y characters converted to HEX and added +80 to the first two digits to get the boxid (say ZZZZZZZZ). With this information the oscam was able to detect the card.
Code:
2020/10/27 14:09:49 00000000 s **** OSCam << cardserver log switched, version 1.20_svn, build r11650 (x86_64-linux-gnu)
2020/10/27 14:09:49 00000000 s (main) System name = Linux
2020/10/27 14:09:49 00000000 s (main) Machine = x86_64
2020/10/27 14:09:49 00000000 s (main) creating pidfile /var/run/oscam.pid with pid 147622
2020/10/27 14:09:49 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2020/10/27 14:09:49 00000000 s (main) signal handling initialized
2020/10/27 14:09:49 00000000 s (reader) reader1 [mouse] creating thread for device /dev/ttyUSB0
2020/10/27 14:09:49 00000000 s (main) waiting for local card init
2020/10/27 14:09:49 6A455118 h (webif) webif: decompressed 185615 bytes back into 491040 bytes
2020/10/27 14:09:49 6A455118 h (webif) HTTP Server running. ip=0.0.0.0 port=8888
2020/10/27 14:09:49 0466014D r (reader) reader1 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2020/10/27 14:09:50 0466014D r (reader) reader1 [mouse] card detected
2020/10/27 14:09:51 0466014D r (reader) reader1 [mouse] ATR: 3F FD 14 25 02 50 80 0F 41 B0 0D 69 FF 4A 50 F0 80 00 42 52 03
2020/10/27 14:09:51 0466014D r (reader) reader1 [mouse] Setting baudrate to 76800 bps
2020/10/27 14:09:53 0466014D r (reader) reader1 [mouse] Card type: BRTV
2020/10/27 14:09:53 0466014D r (reader) reader1 [mouse] Rom version: 20AD
2020/10/27 14:09:53 0466014D r (reader) reader1 [mouse] Credit available on card: 0 euro
2020/10/27 14:09:53 0466014D r (reader) reader1 [mouse] Country Code: IND
2020/10/27 14:09:53 0466014D r (reader) reader1 [mouse] Pincode read: 0000
2020/10/27 14:09:53 0466014D r (reader) reader1 [mouse] PCB settings: FF FF FF FF
2020/10/27 14:09:53 0466014D r (reader) reader1 [mouse] type: VideoGuard Unknown Card, caid: 09BB
2020/10/27 14:09:53 0466014D r (reader) reader1 [mouse] serial: ########, BoxID: ########, baseyear: 1997
2020/10/27 14:09:53 0466014D r (reader) reader1 [mouse] ready for requests
2020/10/27 14:09:53 0466014D r (reader) reader1 [mouse] found card system videoguard2
2020/10/27 14:09:53 0466014D r (reader) reader1 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
2020/10/27 14:09:53 0466014D r (reader) reader1 [videoguard2] card detected
2020/10/27 14:09:53 0466014D r (reader) reader1 [videoguard2] type: VideoGuard Unknown Card
The next step is to get the correct INS7e. I tried the following combinations to get the 52 character string for INS7e but was not successful.
Code:
0XXXXXXXXXXXXXXXXYYYYYYYY000000000010202030002020203
6E736B20XXXXXXXXXXXXXXXXYYYYYYYY00010202030002020203
6E736B20XXXXXXXXXXXXXXXX0000000000010202030002020203
6E736B20XXXXXXXXXXXXXXXXYYYYYYYY00010202030000000000
With the above combinations, oscam showed "No Entitlements" on the webif.
Does anybody know how can i get the INS7e?
The view card is marked P2 and the STB model is Mybox MBSN-H412
Please feel free to PM me.
STB look like this,
Thanks
Last edited: