manic01
Super VIP
- Messages
- 2,580
No this is not a wind up. I'm using 51.21 south latitude 1.388 east longitude.
Why is that?
What sat I should move the whole rig to?
What town or city are you situated in?
No this is not a wind up. I'm using 51.21 south latitude 1.388 east longitude.
Why is that?
What sat I should move the whole rig to?
What town or city are you situated in?
Dover in Kent.
Dover in Kent.
It's no wonder your motor is not going to the correct sat with those. Follow Mikelsat's coordinates to get you in the ball park.
Oh I thought I'm from the South so I have checked it and it is the North. The latitude and longitude are in the correct settings.
BTW, I have found the issue. When I undo the screw that hold on LNB and I have moved the LNB in so guess what?
I can now receive sport klub 1 hd and some other channels. But I cant get the signals for sport klub 2,3 and some other channels. I tried to adjust my dish, motor elevation and usuals but it does nothing.
I think there is a problem with my lnb as it is to too small to move in. Here is my lnb:
https://www.world-of-satellite.co.uk/gt-sat-gt-slrc1-0.1db-universal-single-compact-lnb
Is my lnb that I bought are the wrong one?
I have already bought inverto black ultra 0.2db that I bought it in few months ago but I'm not sure if it would work??
Your inverto will work on your dish it remains to be seen if its any better or the focal point can be adjusted any better with it.
Best thing to do is try it.
When I moved the whole rig to dead straight with the motor set to 0 and when I selected on a channel on 0.8west, the motor won't move.
It would be a minuscule movement but again your setup method is wrong. When dead straight you dont move the motor to 0.8.
Do the above of yours that ive quoted.
Now loosen the ubolts clamping your motor to your pole and move the whole dish/motor assembly around the pole to tweak the signal for 0.8w when you max the signal carefully tighten the ubolts keeping an eye on the signal to make sure it does not drop.
I would be better if you turned usuals off on the box to do this as when the whole rig is straight you dont want the motor to move to 0.8 it need to remain straight.
Oh right, would you move the whole rig to dead straight after you turn off the usuals and then turn them on?
So what if the motor won't move?
Do I have to reset the motor, disconnect the cable from the motor, select al jazeera english on 0.8west, turn off power, reconnect the cable to the motor, turn on the receiver, turn on the usuals and select al jazeera english to get the motor moving?
If not can you give me step to step with what I need to do to get the motor moving??
Get the dish setup properly as described in my previous post then turn usuals back on and send it to say 28 east if its not moving then we will address that because at the moment your making too many mistakes with the motor setup so one step at a time.