—————————————————————
Model name: HD 200 COMBO
Software version: Ver 03.34, LDR: Ver 00.01
Hardware version: Ver 01.00
Last update: Mar 17 2009
—————————————————————
Hi,
My partner Niamh had a sat receiver and we never used it.
This is the first time and I have not set the antenna as it is a part of the building.
We are temporary relocated to an apartment that has both digital tv and satellite antenna hub.
I have connected the receiver and did reset to factory defaults following to deleting all channels.
It seems that it only (at least from the tests I’ve done) connects to Astra (19.2E) and Astra 2A/2D (28.2E). They both connect to the same 12 channels. I tried with a different frequency that I found in a website (Astra -frequency - channel list) and I got 2 more.
I can’t not even see one of them. Nevertheless I can see subtitles, information about the channel, signal, information about the current program... but black screen. In other channels appear “scrambled channel”.
The digital tv aerial works fine.
Could anyone tell me if the sat decoder is broken?
Could anyone send me any of the following files:
- manual
- Firmware
- Connectivity RS232 and USB (management and/or firmware update): software and instructions
- Codes for scrambled channels? Do I need a card?
Any files / guidance is welcome.
Thank you for your time.
Kind regards,
ivrahim
PS. We are mainly interested in Irish and UK channels as well as US, Spain, Aljazzera, independent news, documentaries, and of course movies and tv series.
Sent from my iPhone using Tapatalk
Model name: HD 200 COMBO
Software version: Ver 03.34, LDR: Ver 00.01
Hardware version: Ver 01.00
Last update: Mar 17 2009
—————————————————————
Hi,
My partner Niamh had a sat receiver and we never used it.
This is the first time and I have not set the antenna as it is a part of the building.
We are temporary relocated to an apartment that has both digital tv and satellite antenna hub.
I have connected the receiver and did reset to factory defaults following to deleting all channels.
It seems that it only (at least from the tests I’ve done) connects to Astra (19.2E) and Astra 2A/2D (28.2E). They both connect to the same 12 channels. I tried with a different frequency that I found in a website (Astra -frequency - channel list) and I got 2 more.
I can’t not even see one of them. Nevertheless I can see subtitles, information about the channel, signal, information about the current program... but black screen. In other channels appear “scrambled channel”.
The digital tv aerial works fine.
Could anyone tell me if the sat decoder is broken?
Could anyone send me any of the following files:
- manual
- Firmware
- Connectivity RS232 and USB (management and/or firmware update): software and instructions
- Codes for scrambled channels? Do I need a card?
Any files / guidance is welcome.
Thank you for your time.
Kind regards,
ivrahim
PS. We are mainly interested in Irish and UK channels as well as US, Spain, Aljazzera, independent news, documentaries, and of course movies and tv series.
Sent from my iPhone using Tapatalk