oscam-emu test no2

N

nautilus7

VIP
Messages
607
Hi, this test can be taken by everyone that has:

1. a receiver that can open powervu channels without stream relay (i.e via dvbapi)
2. oscam-emu r790 or later
3. Reception to powervu channels that use the DES algorithm, like these in 0.8W or 4.8E (discovery, animal planet, etc)

How to test:

1. Set the "API for extended CWs" to 2 (OE2.0)
2. Restart oscam-emu
3. Tune to a DES powervu channel
4. Tell me if there is picture and what is your receiver model


I am trying to figure out if there are boxes where the DES algorithm works with the API for extended CWs = 2 setting. Thanks!
 
predator_2

predator_2

Donating Member
Messages
175
Test 2

OScam 11505 with emu 790 posted on 28-02-2019.
DM 920 UHD, image Newnigma2, HD Glas FHD17.
Tested on AFN and don;t work black screen emu is green, 4.8 update ok on SIS, 0,8 W alsoo ok.

Alsoo restart emu AFN black screen, emu work and is making update. 4,8 and 0,8 work ok.

With extended_cw_api = 1 all Pow**Vu channel work ok.



 
Last edited:
fmoreira

fmoreira

Registered
Messages
249
Oscam 11505, Dreambox900Uhd OpenAtv 6.2

With API for extended CWs = 2 i have a black screen...




I do not know if this is a important information:

- With Oscam 11505 from 28/02 and 04/03 i have to reboot the box when i came from Discovery channels (as i said in Test01 topic);

- But when i change the API for extended CWs from 1 to 2 i have a black screen but i have not to reboot box after Des channels!!
 
H

harshy

Registered
Messages
746
Both your receivers require stream relay, nautilus is referring to boxes like the DM800 which don’t need stream relay to open po*ervu channels
 
fmoreira

fmoreira

Registered
Messages
249
harshy said:
Both your receivers require stream relay, nautilus is referring to boxes like the DM800 which don’t need stream relay to open po*ervu channels
Click to expand...

You're mistaken @harshy.

Dm900Uhd never needed stream relay for Power Vu channels.

Until Oscam Emu 11503 it was necessary a reboot when you returned from DES channels but it worked ok on Power Vu.

Oscam 11504 and 11505 (from 26/02) worked perfectly without reboot.

With last 2 OScam Emu versions i need reboot again when i back from DES channels but continues to work without Stream relay...

So the stream relay it´s only a way to avoid reboot, but Power Vu works fine without it.
 
B

banshee

Registered
Messages
27
Im using 11505 from 26/2 and i get black screen on all des channels with every setting on my dm920
Csa channels work fine

any ideas?

thanks
 
fmoreira

fmoreira

Registered
Messages
249
banshee said:
Im using 11505 from 26/2 and i get black screen on all des channels with every setting on my dm920

Csa channels work fine



any ideas?



thanks
Click to expand...
On oscam.server delete the reader for PowerVu. Reboot the box

Worked for me.
 
D

dxdy

VIP
Messages
669
is possible to fix problem with Tandberg and OE2.2? for example in ncam all is fine but on oscam (ARM) emu tandberg wont work if OE2.2 in config
 
N

nautilus7

VIP
Messages
607
Which channels don't work? Post logs.

It must be your config settings. NCAM is just a closed source clone of oscam-emu.
 
D

dxdy

VIP
Messages
669
nautilus7 said:
Which channels don't work? Post logs.

It must be your config settings. NCAM is just a closed source clone of oscam-emu.
Click to expand...

in oscam.conf with extended_cw_api = 1 (OE2.2) all working fine (PowerVU) but Tandberg channels (Arena Sport) work only in CS with CAID 4AEE, not Tandberg emu (if set priority in oscam.dvbapi for 1010, logs show decoding but no picture)

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
delayer = 60
user = dvbapiau
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 1
boxtype = dreambox
Click to expand...

and reader in oscam.server
[reader]
label = emulator
protocol = emu
device = emulator
disablecrccws_only_for = 0E00:000000
caid = 0500,0100,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1,A101
detect = cd
ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000FE;A101:000000
group = 1
emmcache = 1,5,31,1
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE;A101:000000
Click to expand...

if change to extended_cw_api = 2 (OE2.0), Tandberg start working with emu but lost PowerVU (Discovery channels)

with Ncam no problem at all with extended_cw_api = 1 (OE2.2). all works fine. i tried many configs but nothing helps only changing extended_cw_api make difference. i had this problem on Dreambox 920 and Zgemma H7.S (dont know for others receivers)


here is log
2019/03/20 10:19:15 2E9242A8 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 4AEE ECM_PID: 0C50 PROVID: 000000
2019/03/20 10:19:15 2E9242A8 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1010 ECM_PID: 0D18 PROVID: 000000
2019/03/20 10:19:15 2E9242A8 c (dvbapi) Demuxer 0 found 2 ECMpids and 2 STREAMpids in caPMT
2019/03/20 10:19:15 2E9242A8 c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 1010 PROVID 000000 ECMPID 0D18 ANY CHID PMTPID 08A8 VPID 08A6
2019/03/20 10:19:15 2E9242A8 c (dvbapi) Demuxer 0 found 2 ECMpids and 2 STREAMpids in PMT
2019/03/20 10:19:15 2E9242A8 c (ecm) dvbapiau (1010@000000/0000/01CF/1B:AB86E9F11FBCB991C47DEF875C788D02): found (1 ms) by emulator - Arena Sport 1
Click to expand...
 
N

nautilus7

VIP
Messages
607
I can't understand why this happens. In my box it works ok, but it has a mips cpu. Is zgemma H7.S also an arm receiver?

Please make a log with debug level to full in case there is something there.

In which emu version did this issue appear? Can you try with emu 789 or older and tell me if it works?
 
N

nautilus7

VIP
Messages
607
Can you also post your ncam configs? I need to see what is different there, because as I told you, ncam is a clone of oscam-emu, so it must be a configuration problem.
 
D

dxdy

VIP
Messages
669
configs is almost identical

NCAM
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
ecminfo_type = 1
user = root
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 1
boxtype = dreambox
Click to expand...

[reader]
label = constant.cw
protocol = constcw
device = /etc/tuxbox/config/constant.cw
caid = 2600,0B00,0B02,0500,0963,06AD,0940
group = 1

[reader]
label = emulator
protocol = emu
device = emulator
caid = 0500,0100,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1,A101
detect = cd
ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000FE;A101:000000
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE;A101:000000
cacheex = 0
cacheex_maxhop = 0
cacheex_allow_request = 0
dropbadcws = 0
disablecrccws = 0
Click to expand...


Oscam
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
delayer = 60
user = dvbapiau
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 1
boxtype = dreambox
Click to expand...

[reader]
label = constant.cw
protocol = constcw
device = /usr/keys/constant.cw
caid = 2600,0B00,0B02,0500,0963,06AD,0940
group = 1

[reader]
label = emulator
protocol = emu
device = emulator
caid = 0500,0100,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1,A101
detect = cd
ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000FE;A101:000000
group = 1
emmcache = 1,5,31,1
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE;A101:000000
Click to expand...
 
Last edited:
N

nautilus7

VIP
Messages
607
The oscam-emu CWs don't have correct checksum bytes.

Since you don't have the option to skip CW ckecksum test in the reader, this means that you have it enabled globally in oscam.

So go to: Webif --> Config --> Global --> Skip CWs checksum test and make sure you DESELECT IT

Anyway, the emu reader should always send correct CWs, so I'll make sure this happens in the next version of emu.
 
You must log in or register to reply here.
Top