SRTV Feed HD 16.0°E ?
- Thread starter devid 55
- Start date
- Messages
- 24,745
SRTV Feed HD 16.0°E
12643 V 27500 DVB-S2 8PSK
MPEG 4 - 4:2:0 - HDTV
Namespace: 0x00a00000
Service Reference = 1:0:1:c8:1f4:5:A00000:0:0:0:
VIDEO PID = 0x0200 ( 512d )
AUDIO PID = 0x1010 ( 4112d )
PCR PID = 0x0200 ( 512d )
PMT PID = 0x1c20 ( 7200d )
TSID = 0x01f4 ( 500d )
ONID = 0x0005 ( 5d )
SID = 0x00c8 ( 200d )
BISS KEY Thnxs @ Kugujen => https://www.sat-universe.com/showpost.php?p=2037083348&postcount=224
12643 V 27500 DVB-S2 8PSK
MPEG 4 - 4:2:0 - HDTV
Namespace: 0x00a00000
Service Reference = 1:0:1:c8:1f4:5:A00000:0:0:0:
VIDEO PID = 0x0200 ( 512d )
AUDIO PID = 0x1010 ( 4112d )
PCR PID = 0x0200 ( 512d )
PMT PID = 0x1c20 ( 7200d )
TSID = 0x01f4 ( 500d )
ONID = 0x0005 ( 5d )
SID = 0x00c8 ( 200d )
BISS KEY Thnxs @ Kugujen => https://www.sat-universe.com/showpost.php?p=2037083348&postcount=224
- Messages
- 24,745
FEED HD MBC Eutelsat 21B ( 21.6°E )
11564 V 3333 FEC 5/6 DVB-S2 QPSK
MPEG 4 - 4:2:0 - HDTV
Namespace: 0x00d80000
Service Reference = 1:0:19:1:41:800:d80000:0:0:0:
VIDEO PID = 0x0064 ( 100d )
AUDIO PID = 0x006e ( 110d )
PCR PID = 0x0064 ( 100d )
PMT PID = 0x1b59 ( 7001d )
TXT PID = N/A
TSID = 0x0041 ( 65d )
ONID = 0x00800 ( 2048d )
SID = 0x001 ( 1d )
BISS KEY Thanks @ omid1348 :thum: => https://www.sat-universe.com/showpost.php?p=2037083343&postcount=380
11564 V 3333 FEC 5/6 DVB-S2 QPSK
MPEG 4 - 4:2:0 - HDTV
Namespace: 0x00d80000
Service Reference = 1:0:19:1:41:800:d80000:0:0:0:
VIDEO PID = 0x0064 ( 100d )
AUDIO PID = 0x006e ( 110d )
PCR PID = 0x0064 ( 100d )
PMT PID = 0x1b59 ( 7001d )
TXT PID = N/A
TSID = 0x0041 ( 65d )
ONID = 0x00800 ( 2048d )
SID = 0x001 ( 1d )
BISS KEY Thanks @ omid1348 :thum: => https://www.sat-universe.com/showpost.php?p=2037083343&postcount=380
- Messages
- 24,745
i see i thought the namespace used for various channels was the same for every STB just like PIDS but i guess not but i do not very often use Linux boxes anymore ,
i was just posting to offer some help that is all sorry if info i posted is not accurate i was not aware .
i was just posting to offer some help that is all sorry if info i posted is not accurate i was not aware .
Its perfectly ok,I might be wrong too,but I know cases where people were using namespace from other boxes and it didn't work,once they checked they found out theirs was different.
I believe this is because the little differences in the frequency when tuning a channel,since all the other data is the same for anyone,the frequency people scan a channel in,specially when blindscan,might differ from machine to machine,and this would create a different namespace.I think this is how it works : a difference of 1 MHZ would do that,and the machine would still lock,even 10 MHZ would.
I think best way is to show oscam users how to get it on their own,but that's just my opinion.
I believe this is because the little differences in the frequency when tuning a channel,since all the other data is the same for anyone,the frequency people scan a channel in,specially when blindscan,might differ from machine to machine,and this would create a different namespace.I think this is how it works : a difference of 1 MHZ would do that,and the machine would still lock,even 10 MHZ would.
I think best way is to show oscam users how to get it on their own,but that's just my opinion.
Last edited: