Latest firmwares for Pioneer

SANTO_DOMINGO

Registered
Messages
479
Pioneer firmware 1430_OFM_M4

Pioneer firmware

-----------------------------------------------------------------
news firmware pioneer 1430 tps ok mct redlight ok Irdeto 2 AU test ok by MISSILEDEMO
 
Last edited:

vegeku90

Registered
Messages
1,586
Pioneer 14/15 Generator M102....

1430 M102 Generator FIX SECA2prov.65 Eu.rcu

1530 M102 Generator RU EU
 

vegeku90

Registered
Messages
1,586
12.03

Code:
[B]new version M108 generator[/B]
---------------------------
for test
---------------------------
rotor time
step fixed
---------------------------

thanks generator
 

vegeku90

Registered
Messages
1,586
Code:
[B]new version M111 generator[/B]


- add section CONAX for sharing;
- fixed watching italian canals RAI (need reset keys).

PS
:

sections *** and CONAX only for sharing!

New emuedit for M111

THX Generator
 

expo

Registered
Messages
87
new version 1530_M111_generator


- add section CONAX for sharing;
- fixed watching italian canals RAI (need reset keys).

THX Generator
 
Last edited:

vegeku90

Registered
Messages
1,586
29.03

Code:
Test version PI725a9 for 1530 by D-mon

-p0Lsat AU back.

Good luck

thx d-mon and generator
 

Acech

Registered
Messages
678
M117 for 1430/1530

Testing version M117 for 1430/1530.

Thirty flag ID Provider for sharing
 
Last edited:

vegeku90

Registered
Messages
1,586
15_OFM_100408_PI725a9
----------------------
Added:

Code:
OnLine Edition Keys EMU.
The way of the conduct:
- connect the STB from the PC the cable of COM
- turn on in the STB the connection of COM
/ 2x_MENU (on the front panel of the STB, LED CoM1)
or '+, MENU, 6, 4'
or 'lub 2x_A, 4'
or 'E, 1, 4' /

- Start the PC the added programme MediasatConnect_v3.1.0
- pass to the tuck 'EMU Keys'
- press 'Connect'
- press 'OnLine EMU'
-- if the connection RS among STB and PC
--- he is correct, MC will read the OnLine set of keys
--- he is not correct, MC will make possible THE EMU from the file openly

- you can now edit keys in the EMU, similarly
as in the programme 'EMU Keys Editor' ( D-mon )
-- near the active connection of COM
altered keys, attributes, etc. they automatically are
actualized in STB.
-- near the switched off connection of COM,
the edition keys analogous as in the 'EMU Keys Editor'

/ you can change the order provi ( soid ) by threading the mouse
in the grounds of the list provi
- the altered order is remembered, if you write down
the EMU to the file ('Save EMU')
- the change the order provi, he is not sent OnLine to STB
( you can send whole EMU's written down to the file, the order provi
in STB will be such alone then as in the EMU file ) /

Big thanks for the D-mon.

julekjulek
--------------------------------------

=== Information for developers ===

New RS232 command for uploading of keys added.
RS232 Command format:
1. Header (hexadecimal): 55 21 KN
where $55 is standard prefix,
$21 is the command ( CMD_SEND_KEYS_ATRIB, store in basic.BUFEMU_E_HDL ),
KN is the total number of keys

Key format:
00 - CA System ID as defined for BUFEMU
01...03 - 3 bytes of SOID
04 - Key_id
05 - length Key
06 ... value Key

2. Header (hexadecimal): 55 22 KN
where $55 is standard prefix,
$22 is the command ( DELETE_KEYS ),
KN is the total number of keys

Key format:
00 - CA System ID as defined for BUFEMU
01...03 - 3 bytes of SOID
04 - Key_id
05 - command ( DELETE_MODE )
DELETE_MODE:
0 - key of RSA_KEY
1 - key of EMU
2 - delete all key and provi

3. Header (hexadecimal): 55 AB CMD
where $55 is standard prefix,
$AB is the command ( SEND_BUF_EMU ),
CMD is the command:
0 - BUFEMU
1 - RSA_KEYS
:thum:
 
Top