The LATEST OSCAM-EMU FOR VARIOUS PLATFORMS

Status
Not open for further replies.

iomeali

Registered
Messages
3,962
Thanks HaPeBa

Special Features:

Pid-File control : without start-parameter "-B" and with "pidfile=[blank]" in oscam.conf --> no Pid-File

WebIf - Readers-/Users-Menu --> Disable-/Enable-Symbol changed

WebIf - Status-Menu --> Skript-/Shutdown-Button "properties" individually programmable via CSS-File
(LI.menu_script ... and/or LI.menu_shutdown ...)

WebIf - Special WebIf-Design included

WebIf - SaveEmm --> without "*.bin"

V14 Bad-EMM-Filter (0x07) is included.
To activate ... WebIf --> Readers --> edit Reader with V14 --> Videoguard settings --> "Filter 0x07 for CAID 09C4, 098C" (default: disabled)



Oscam Komplett - Minimal:
- "with all" but without ...
- Touch
- OpenSSL
- IPV6
- PCSC
- Smartreader-Support (LibUSB)
- GBox

But now with protocol "SCAM" and edit "SoftCam.Key" over webif



Explanation of binaries:

arm = Dockstar (Debian), Sheevaplug ...
raspb = RaspBerry (libcrypto static)
arm-coolstream = Coolstream
fritz = Fritzbox
owrt24 = OpenWRT 2.4 (Fritz 32XX, 71XX, 72XX ...)
mca = Matrix Air Cam (libcrypto static)
mipsel = Mipsel Tuxbox (newer Dreams ...)
mipsel-wdtv = Mipsel Tuxbox WDTV
ppc-dbox2 = PPC-Old (Dbox2, Dream500 ...)
ppc-dream = PPC Tuxbox (Dream 600, 7000 ...)
ppc-dream-old = PPC Tuxbox (ältere Dreams mit Gemini, mit libcrypto.so.0.9.7)
sh4 = Golden Media ...QBOXHD...
sh4-stapi = Kathi ...
syn-atom = Synologie with Atom CPU (additional with libcrypto static)
x86-32 = Linux PC's 32 Bit, Igel ...
x86-64 = Linux PC's 64 Bit

Additional for "arm", "raspb", "syn-atom", "owrt24" and "x86-64" a binary with "libusb" and "pcsc".
Additional for "syn-atom" a binary with libcrypto static.
Additional for "mipsel" a binary with "libusb".



This version creates a virtual card reader, which is configured automatically.
You may save the default reader configuration with the webif and then modify it to your own liking.

SoftCam.Key:
OSCam-EMU does not require, but will make use of "SoftCam.Key" if available.
"SoftCam.Key" is searched in the oscam config folder (where oscam.conf is located) and also in "/var/keys".

MfG
HaPeBa
 

iomeali

Registered
Messages
3,962
Iomeali-Oscam-EMU-20-189-9888

Thanks HaPeBa

Special Features:

Pid-File control : without start-parameter "-B" and with "pidfile=[blank]" in oscam.conf --> no Pid-File

WebIf - Readers-/Users-Menu --> Disable-/Enable-Symbol changed

WebIf - Status-Menu --> Skript-/Shutdown-Button "properties" individually programmable via CSS-File
(LI.menu_script ... and/or LI.menu_shutdown ...)

WebIf - Special WebIf-Design included

WebIf - SaveEmm --> without "*.bin"

V14 Bad-EMM-Filter (0x07) is included.
To activate ... WebIf --> Readers --> edit Reader with V14 --> Videoguard settings --> "Filter 0x07 for CAID 09C4, 098C" (default: disabled)



Oscam Komplett - Minimal:
- "with all" but without ...
- Touch
- OpenSSL
- IPV6
- PCSC
- Smartreader-Support (LibUSB)
- GBox

But now with protocol "SCAM" and edit "SoftCam.Key" over webif



Explanation of binaries:

arm = Dockstar (Debian), Sheevaplug ...
raspb = RaspBerry (libcrypto static)
arm-coolstream = Coolstream
fritz = Fritzbox
owrt24 = OpenWRT 2.4 (Fritz 32XX, 71XX, 72XX ...)
mca = Matrix Air Cam (libcrypto static)
mipsel = Mipsel Tuxbox (newer Dreams ...)
mipsel-wdtv = Mipsel Tuxbox WDTV
ppc-dbox2 = PPC-Old (Dbox2, Dream500 ...)
ppc-dream = PPC Tuxbox (Dream 600, 7000 ...)
ppc-dream-old = PPC Tuxbox (ältere Dreams mit Gemini, mit libcrypto.so.0.9.7)
sh4 = Golden Media ...QBOXHD...
sh4-stapi = Kathi ...
syn-atom = Synologie with Atom CPU (additional with libcrypto static)
x86-32 = Linux PC's 32 Bit, Igel ...
x86-64 = Linux PC's 64 Bit

Additional for "arm", "raspb", "syn-atom", "owrt24" and "x86-64" a binary with "libusb" and "pcsc".
Additional for "syn-atom" a binary with libcrypto static.
Additional for "mipsel" a binary with "libusb".



This version creates a virtual card reader, which is configured automatically.
You may save the default reader configuration with the webif and then modify it to your own liking.

SoftCam.Key:
OSCam-EMU does not require, but will make use of "SoftCam.Key" if available.
"SoftCam.Key" is searched in the oscam config folder (where oscam.conf is located) and also in "/var/keys".

MfG
HaPeBa
 

iomeali

Registered
Messages
3,962
Iomeali-Oscam-EMU-23-189-9909

Thanks HaPeBa

Special Features:

Pid-File control : without start-parameter "-B" and with "pidfile=[blank]" in oscam.conf --> no Pid-File

WebIf - Readers-/Users-Menu --> Disable-/Enable-Symbol changed

WebIf - Status-Menu --> Skript-/Shutdown-Button "properties" individually programmable via CSS-File
(LI.menu_script ... and/or LI.menu_shutdown ...)

WebIf - Special WebIf-Design included

WebIf - SaveEmm --> without "*.bin"

V14 Bad-EMM-Filter (0x07) is included.
To activate ... WebIf --> Readers --> edit Reader with V14 --> Videoguard settings --> "Filter 0x07 for CAID 09C4, 098C" (default: disabled)



Oscam Komplett - Minimal:
- "with all" but without ...
- Touch
- OpenSSL
- IPV6
- PCSC
- Smartreader-Support (LibUSB)
- GBox

But now with protocol "SCAM" and edit "SoftCam.Key" over webif



Explanation of binaries:

arm = Dockstar (Debian), Sheevaplug ...
raspb = RaspBerry (libcrypto static)
arm-coolstream = Coolstream
fritz = Fritzbox
owrt24 = OpenWRT 2.4 (Fritz 32XX, 71XX, 72XX ...)
mca = Matrix Air Cam (libcrypto static)
mipsel = Mipsel Tuxbox (newer Dreams ...)
mipsel-wdtv = Mipsel Tuxbox WDTV
ppc-dbox2 = PPC-Old (Dbox2, Dream500 ...)
ppc-dream = PPC Tuxbox (Dream 600, 7000 ...)
ppc-dream-old = PPC Tuxbox (ältere Dreams mit Gemini, mit libcrypto.so.0.9.7)
sh4 = Golden Media ...QBOXHD...
sh4-stapi = Kathi ...
syn-atom = Synologie with Atom CPU (additional with libcrypto static)
x86-32 = Linux PC's 32 Bit, Igel ...
x86-64 = Linux PC's 64 Bit

Additional for "arm", "raspb", "syn-atom", "owrt24" and "x86-64" a binary with "libusb" and "pcsc".
Additional for "syn-atom" a binary with libcrypto static.
Additional for "mipsel" a binary with "libusb".



This version creates a virtual card reader, which is configured automatically.
You may save the default reader configuration with the webif and then modify it to your own liking.

SoftCam.Key:
OSCam-EMU does not require, but will make use of "SoftCam.Key" if available.
"SoftCam.Key" is searched in the oscam config folder (where oscam.conf is located) and also in "/var/keys".

MfG
HaPeBa
 

ducomico

Registered
Messages
438
oscam_9914_all_EMU_07 - ALL VERSION,S

oscam_9914_all_EMU_07 - ALL VERSION,S:
=========================================
:nana::thum:
 

iomeali

Registered
Messages
3,962
Iomeali-Oscam-EMU-32-224-10001

Thanks HaPeBa

Special Features:

Pid-File control : without start-parameter "-B" and with "pidfile=[blank]" in oscam.conf --> no Pid-File

WebIf - Readers-/Users-Menu --> Disable-/Enable-Symbol changed

WebIf - Status-Menu --> Skript-/Shutdown-Button "properties" individually programmable via CSS-File
(LI.menu_script ... and/or LI.menu_shutdown ...)

WebIf - Special WebIf-Design included

WebIf - SaveEmm --> without "*.bin"

V14 Bad-EMM-Filter (0x07) is included.
To activate ... WebIf --> Readers --> edit Reader with V14 --> Videoguard settings --> "Filter 0x07 for CAID 09C4, 098C" (default: disabled)



Oscam Komplett - Minimal:
- "with all" but without ...
- Touch
- OpenSSL
- IPV6
- PCSC
- Smartreader-Support (LibUSB)
- GBox

But now with protocol "SCAM" and edit "SoftCam.Key" over webif



Explanation of binaries:

arm = Dockstar (Debian), Sheevaplug ...
raspb = RaspBerry (libcrypto static)
arm-coolstream = Coolstream
fritz = Fritzbox
owrt24 = OpenWRT 2.4 (Fritz 32XX, 71XX, 72XX ...)
mca = Matrix Air Cam (libcrypto static)
mipsel = Mipsel Tuxbox (newer Dreams ...)
mipsel-wdtv = Mipsel Tuxbox WDTV
ppc-dbox2 = PPC-Old (Dbox2, Dream500 ...)
ppc-dream = PPC Tuxbox (Dream 600, 7000 ...)
ppc-dream-old = PPC Tuxbox (ältere Dreams mit Gemini, mit libcrypto.so.0.9.7)
sh4 = Golden Media ...
sh4-stapi = Kathi ...
syn-atom = Synologie with Atom CPU (additional with libcrypto static)
x86-32 = Linux PC's 32 Bit, Igel ...
x86-64 = Linux PC's 64 Bit

Additional for "arm", "raspb", "syn-atom", "owrt24" and "x86-64" a binary with "libusb" and "pcsc".
Additional for "syn-atom" and "mipsel" a binary with libcrypto static.
Additional for "mipsel" a binary with "libusb".



This version creates a virtual card reader, which is configured automatically.
You may save the default reader configuration with the webif and then modify it to your own liking.

SoftCam.Key:
OSCam-EMU does not require, but will make use of "SoftCam.Key" if available.
"SoftCam.Key" is searched in the oscam config folder (where oscam.conf is located) and also in "/var/keys".

MfG
HaPeBa
 

iomeali

Registered
Messages
3,962
Iomeali-Oscam-EMU-35-226-10035

Thanks HaPeBa

Special Features:

Pid-File control : without start-parameter "-B" and with "pidfile=[blank]" in oscam.conf --> no Pid-File

WebIf - Readers-/Users-Menu --> Disable-/Enable-Symbol changed

WebIf - Status-Menu --> Skript-/Shutdown-Button "properties" individually programmable via CSS-File
(LI.menu_script ... and/or LI.menu_shutdown ...)

WebIf - Special WebIf-Design included

WebIf - SaveEmm --> without "*.bin"

V14 Bad-EMM-Filter (0x07) is included.
To activate ... WebIf --> Readers --> edit Reader with V14 --> Videoguard settings --> "Filter 0x07 for CAID 09C4, 098C" (default: disabled)



Oscam Komplett - Minimal:
- "with all" but without ...
- Touch
- OpenSSL
- IPV6
- PCSC
- Smartreader-Support (LibUSB)
- GBox

But now with protocol "SCAM" and edit "SoftCam.Key" over webif



Explanation of binaries:

arm = Dockstar (Debian), Sheevaplug ...
raspb = RaspBerry (libcrypto static)
arm-coolstream = Coolstream
fritz = Fritzbox
owrt24 = OpenWRT 2.4 (Fritz 32XX, 71XX, 72XX ...)
mca = Matrix Air Cam (libcrypto static)
mipsel = Mipsel Tuxbox (newer Dreams ...)
mipsel-wdtv = Mipsel Tuxbox WDTV
ppc-dbox2 = PPC-Old (Dbox2, Dream500 ...)
ppc-dream = PPC Tuxbox (Dream 600, 7000 ...)
ppc-dream-old = PPC Tuxbox (ältere Dreams mit Gemini, mit libcrypto.so.0.9.7)
sh4 = Golden Media ...
sh4-stapi = Kathi ...
syn-atom = Synologie with Atom CPU (additional with libcrypto static)
x86-32 = Linux PC's 32 Bit, Igel ...
x86-64 = Linux PC's 64 Bit

Additional for "arm", "raspb", "syn-atom", "owrt24" and "x86-64" a binary with "libusb" and "pcsc".
Additional for "syn-atom" and "mipsel" a binary with libcrypto static.
Additional for "mipsel" a binary with "libusb".



This version creates a virtual card reader, which is configured automatically.
You may save the default reader configuration with the webif and then modify it to your own liking.

SoftCam.Key:
OSCam-EMU does not require, but will make use of "SoftCam.Key" if available.
"SoftCam.Key" is searched in the oscam config folder (where oscam.conf is located) and also in "/var/keys".

MfG
HaPeBa
 

iomeali

Registered
Messages
3,962
Iomeali-Oscam-EMU-37-226-10043

Thanks HaPeBa

Special Features:

Pid-File control : without start-parameter "-B" and with "pidfile=[blank]" in oscam.conf --> no Pid-File

WebIf - Readers-/Users-Menu --> Disable-/Enable-Symbol changed

WebIf - Status-Menu --> Skript-/Shutdown-Button "properties" individually programmable via CSS-File
(LI.menu_script ... and/or LI.menu_shutdown ...)

WebIf - Special WebIf-Design included

WebIf - SaveEmm --> without "*.bin"

V14 Bad-EMM-Filter (0x07) is included.
To activate ... WebIf --> Readers --> edit Reader with V14 --> Videoguard settings --> "Filter 0x07 for CAID 09C4, 098C" (default: disabled)



Oscam Komplett - Minimal:
- "with all" but without ...
- Touch
- OpenSSL
- IPV6
- PCSC
- Smartreader-Support (LibUSB)
- GBox

But now with protocol "SCAM" and edit "SoftCam.Key" over webif



Explanation of binaries:

arm = Dockstar (Debian), Sheevaplug ...
raspb = RaspBerry (libcrypto static)
arm-coolstream = Coolstream
fritz = Fritzbox
owrt24 = OpenWRT 2.4 (Fritz 32XX, 71XX, 72XX ...)
mca = Matrix Air Cam (libcrypto static)
mipsel = Mipsel Tuxbox (newer Dreams ...)
mipsel-wdtv = Mipsel Tuxbox WDTV
ppc-dbox2 = PPC-Old (Dbox2, Dream500 ...)
ppc-dream = PPC Tuxbox (Dream 600, 7000 ...)
ppc-dream-old = PPC Tuxbox (ältere Dreams mit Gemini, mit libcrypto.so.0.9.7)
sh4 = Golden Media ...
sh4-stapi = Kathi ...
syn-atom = Synologie with Atom CPU (additional with libcrypto static)
x86-32 = Linux PC's 32 Bit, Igel ...
x86-64 = Linux PC's 64 Bit

Additional for "arm", "raspb", "syn-atom", "owrt24" and "x86-64" a binary with "libusb" and "pcsc".
Additional for "syn-atom" and "mipsel" a binary with libcrypto static.
Additional for "mipsel" a binary with "libusb".



This version creates a virtual card reader, which is configured automatically.
You may save the default reader configuration with the webif and then modify it to your own liking.

SoftCam.Key:
OSCam-EMU does not require, but will make use of "SoftCam.Key" if available.
"SoftCam.Key" is searched in the oscam config folder (where oscam.conf is located) and also in "/var/keys".

MfG
HaPeBa
 

iomeali

Registered
Messages
3,962
Iomeali-Oscam-EMU-40-226-10071

Thanks HaPeBa

Special Features:

Pid-File control : without start-parameter "-B" and with "pidfile=[blank]" in oscam.conf --> no Pid-File

WebIf - Readers-/Users-Menu --> Disable-/Enable-Symbol changed

WebIf - Status-Menu --> Skript-/Shutdown-Button "properties" individually programmable via CSS-File
(LI.menu_script ... and/or LI.menu_shutdown ...)

WebIf - Special WebIf-Design included

WebIf - SaveEmm --> without "*.bin"

V14 Bad-EMM-Filter (0x07) is included.
To activate ... WebIf --> Readers --> edit Reader with V14 --> Videoguard settings --> "Filter 0x07 for CAID 09C4, 098C" (default: disabled)



Oscam Komplett - Minimal:
- "with all" but without ...
- Touch
- OpenSSL
- IPV6
- PCSC
- Smartreader-Support (LibUSB)
- GBox

But now with protocol "SCAM" and edit "SoftCam.Key" over webif



Explanation of binaries:

arm = Dockstar (Debian), Sheevaplug ...
raspb = RaspBerry (libcrypto static)
arm-coolstream = Coolstream
fritz = Fritzbox
owrt24 = OpenWRT 2.4 (Fritz 32XX, 71XX, 72XX ...)
mca = Matrix Air Cam (libcrypto static)
mipsel = Mipsel Tuxbox (newer Dreams ...)
mipsel-wdtv = Mipsel Tuxbox WDTV
ppc-dbox2 = PPC-Old (Dbox2, Dream500 ...)
ppc-dream = PPC Tuxbox (Dream 600, 7000 ...)
ppc-dream-old = PPC Tuxbox (ältere Dreams mit Gemini, mit libcrypto.so.0.9.7)
sh4 = Golden Media ...
sh4-stapi = Kathi ...
syn-atom = Synologie with Atom CPU (additional with libcrypto static)
x86-32 = Linux PC's 32 Bit, Igel ...
x86-64 = Linux PC's 64 Bit

Additional for "arm", "raspb", "syn-atom", "owrt24" and "x86-64" a binary with "libusb" and "pcsc".
Additional for "syn-atom" and "mipsel" a binary with libcrypto static.
Additional for "mipsel" a binary with "libusb".



This version creates a virtual card reader, which is configured automatically.
You may save the default reader configuration with the webif and then modify it to your own liking.

SoftCam.Key:
OSCam-EMU does not require, but will make use of "SoftCam.Key" if available.
"SoftCam.Key" is searched in the oscam config folder (where oscam.conf is located) and also in "/var/keys".

MfG
HaPeBa
 

iomeali

Registered
Messages
3,962
Iomeali-Oscam-EMU-41-226-10076

Thanks HaPeBa

Special Features:

Pid-File control : without start-parameter "-B" and with "pidfile=[blank]" in oscam.conf --> no Pid-File

WebIf - Readers-/Users-Menu --> Disable-/Enable-Symbol changed

WebIf - Status-Menu --> Skript-/Shutdown-Button "properties" individually programmable via CSS-File
(LI.menu_script ... and/or LI.menu_shutdown ...)

WebIf - Special WebIf-Design included

WebIf - SaveEmm --> without "*.bin"

V14 Bad-EMM-Filter (0x07) is included.
To activate ... WebIf --> Readers --> edit Reader with V14 --> Videoguard settings --> "Filter 0x07 for CAID 09C4, 098C" (default: disabled)



Oscam Komplett - Minimal:
- "with all" but without ...
- Touch
- OpenSSL
- IPV6
- PCSC
- Smartreader-Support (LibUSB)
- GBox

But now with protocol "SCAM" and edit "SoftCam.Key" over webif



Explanation of binaries:

arm = Dockstar (Debian), Sheevaplug ...
raspb = RaspBerry (libcrypto static)
arm-coolstream = Coolstream
fritz = Fritzbox
owrt24 = OpenWRT 2.4 (Fritz 32XX, 71XX, 72XX ...)
mca = Matrix Air Cam (libcrypto static)
mipsel = Mipsel Tuxbox (newer Dreams like DM500HD, DM800, DM7025, DM8000 , VU ...)
mipsel-wdtv = Mipsel Tuxbox WDTV
ppc-dbox2 = PPC-Old (Dbox2, Dream500 ...)
ppc-dream = PPC Tuxbox (Dream 600, 7000 ...)
ppc-dream-old = PPC Tuxbox (ältere Dreams mit Gemini, mit libcrypto.so.0.9.7)
sh4 = Golden Media QboxHD ,QboxMiniHd.......
sh4-stapi = Kathi ...
syn-atom = Synologie with Atom CPU (additional with libcrypto static)
x86-32 = Linux PC's 32 Bit, Igel ...
x86-64 = Linux PC's 64 Bit

Additional for "arm", "raspb", "syn-atom", "owrt24" and "x86-64" a binary with "libusb" and "pcsc".
Additional for "syn-atom" and "mipsel" a binary with libcrypto static.
Additional for "mipsel" a binary with "libusb".



This version creates a virtual card reader, which is configured automatically.
You may save the default reader configuration with the webif and then modify it to your own liking.

SoftCam.Key:
OSCam-EMU does not require, but will make use of "SoftCam.Key" if available.
"SoftCam.Key" is searched in the oscam config folder (where oscam.conf is located) and also in "/var/keys".

MfG
HaPeBa
 

iomeali

Registered
Messages
3,962
Iomeali-Oscam-EMU-45-226-10082

Thanks HaPeBa

Special Features:

Pid-File control : without start-parameter "-B" and with "pidfile=[blank]" in oscam.conf --> no Pid-File

WebIf - Readers-/Users-Menu --> Disable-/Enable-Symbol changed

WebIf - Status-Menu --> Skript-/Shutdown-Button "properties" individually programmable via CSS-File
(LI.menu_script ... and/or LI.menu_shutdown ...)

WebIf - Special WebIf-Design included

WebIf - SaveEmm --> without "*.bin"

V14 Bad-EMM-Filter (0x07) is included.
To activate ... WebIf --> Readers --> edit Reader with V14 --> Videoguard settings --> "Filter 0x07 for CAID 09C4, 098C" (default: disabled)



Oscam Komplett - Minimal:
- "with all" but without ...
- Touch
- OpenSSL
- IPV6
- PCSC
- Smartreader-Support (LibUSB)
- GBox

But now with protocol "SCAM" and edit "SoftCam.Key" over webif



Explanation of binaries:

arm = Dockstar (Debian), Sheevaplug ...
raspb = RaspBerry (libcrypto static)
arm-coolstream = Coolstream
fritz = Fritzbox
owrt24 = OpenWRT 2.4 (Fritz 32XX, 71XX, 72XX ...)
mca = Matrix Air Cam (libcrypto static)
mipsel = Mipsel Tuxbox (newer Dreams like DM500HD, DM800, DM7025, DM8000 , VU ...)
mipsel-wdtv = Mipsel Tuxbox WDTV
ppc-dbox2 = PPC-Old (Dbox2, Dream500 ...)
ppc-dream = PPC Tuxbox (Dream 600, 7000 ...)
ppc-dream-old = PPC Tuxbox (ältere Dreams mit Gemini, mit libcrypto.so.0.9.7)
sh4 = Golden Media QboxHD ,QboxMiniHd.......
sh4-stapi = Kathi ...
syn-atom = Synologie with Atom CPU (additional with libcrypto static)
x86-32 = Linux PC's 32 Bit, Igel ...
x86-64 = Linux PC's 64 Bit

Additional for "arm", "raspb", "syn-atom", "owrt24" and "x86-64" a binary with "libusb" and "pcsc".
Additional for "syn-atom" and "mipsel" a binary with libcrypto static.
Additional for "mipsel" a binary with "libusb".



This version creates a virtual card reader, which is configured automatically.
You may save the default reader configuration with the webif and then modify it to your own liking.

SoftCam.Key:
OSCam-EMU does not require, but will make use of "SoftCam.Key" if available.
"SoftCam.Key" is searched in the oscam config folder (where oscam.conf is located) and also in "/var/keys".

MfG
HaPeBa
 

iomeali

Registered
Messages
3,962
Iomeali-Oscam-EMU-50-226-10134.zip

Thanks HaPeBa


Special Features:

Pid-File control : without start-parameter "-B" and with "pidfile=[blank]" in oscam.conf --> no Pid-File

WebIf - Readers-/Users-Menu --> Disable-/Enable-Symbol changed

WebIf - Status-Menu --> Skript-/Shutdown-Button "properties" individually programmable via CSS-File
(LI.menu_script ... and/or LI.menu_shutdown ...)

WebIf - Special WebIf-Design included

WebIf - SaveEmm --> without "*.bin"

V14 Bad-EMM-Filter (0x07) is included.
To activate ... WebIf --> Readers --> edit Reader with V14 --> Videoguard settings --> "Filter 0x07 for CAID 09C4, 098C" (default: disabled)



Oscam Komplett - Minimal:
- "with all" but without ...
- Touch
- OpenSSL
- IPV6
- PCSC
- Smartreader-Support (LibUSB)
- GBox



Explanation of binaries
:

arm = Dockstar (Debian), Sheevaplug ...
raspb = RaspBerry (libcrypto static)
arm-coolstream = Coolstream
fritz = Fritzbox
owrt24 = OpenWRT 2.4 (Fritz 32XX, 71XX, 72XX ...)
mca = Matrix Air Cam (libcrypto static)
mipsel = Mipsel Tuxbox (newer Dreams ...)
mipsel-wdtv = Mipsel Tuxbox WDTV
ppc-dbox2 = PPC-Old (Dbox2, Dream500 ...)
ppc-dream = PPC Tuxbox (Dream 600, 7000 ...)
ppc-dream-old = PPC Tuxbox (ältere Dreams mit Gemini, mit libcrypto.so.0.9.7)
sh4 = Golden Media ...
sh4-stapi = Kathi ...
syn-atom = Synologie with Atom CPU (additional with libcrypto static)
x86-32 = Linux PC's 32 Bit, Igel ...
x86-64 = Linux PC's 64 Bit

Additional for "arm", "raspb", "syn-atom", "owrt24" and "x86-64" a binary with "libusb" and "pcsc".
Additional for "syn-atom" and "mipsel" a binary with libcrypto static.
Additional for "mipsel" a binary with "libusb".



This version creates a virtual card reader, which is configured automatically.
You may save the default reader configuration with the webif and then modify it to your own liking.

SoftCam.Key:
OSCam-EMU does not require, but will make use of "SoftCam.Key" if available.
"SoftCam.Key" is searched in the oscam config folder (where oscam.conf is located) and also in "/var/keys".


And a additional WebIf-Design (Carbon V3 for SU 2.3.zip). Unzip and copy TPL-Files to OSCam-Template-Directory.

MfG
HaPeBa
 

iomeali

Registered
Messages
3,962
Iomeali-Oscam-EMU-76-254-10355

Thanks HaPeBa


Special Features:

Pid-File control : without start-parameter "-B" and with "pidfile=[blank]" in oscam.conf --> no Pid-File

WebIf - Readers-/Users-Menu --> Disable-/Enable-Symbol changed

WebIf - Status-Menu --> Skript-/Shutdown-Button "properties" individually programmable via CSS-File
(LI.menu_script ... and/or LI.menu_shutdown ...)

WebIf - Special WebIf-Design included



Oscam Komplett - Minimal:
- "with all" but without ...
- Touch
- OpenSSL
- IPV6
- PCSC
- Smartreader-Support (LibUSB)
- GBox



Explanation of binaries:

arm = Dockstar (Debian), Sheevaplug ...
raspb = RaspBerry (libcrypto static)
arm-coolstream = Coolstream
fritz71xx = Fritzbox 71xx
fritz73xx = Fritzbox 73xx (earlier named only "fritz")
fritz74xx = Fritzbox 74xx
owrt24 = OpenWRT 2.4 (Fritz 32XX, 71XX, 72XX ...)
mca = Matrix Air Cam (libcrypto static)
mipsel = Mipsel Tuxbox (newer Dreams ...)
mipsel-wdtv = Mipsel Tuxbox WDTV
ppc-dbox2 = PPC-Old (Dbox2, Dream500 ...)
ppc-dream = PPC Tuxbox (Dream 600, 7000 ...)
ppc-dream-old = PPC Tuxbox (ältere Dreams mit Gemini, mit libcrypto.so.0.9.7)
sh4 = Golden Media ...
sh4-stapi = Kathi ...
syn-atom = Synologie with Atom CPU
x86-32 = Linux PC's 32 Bit, Igel ...
x86-64 = Linux PC's 64 Bit

Additional for "arm", "raspb", "syn-atom", "owrt24" and "x86-64" a binary with "libusb" and "pcsc".
Additional for "syn-atom" and "mipsel" a binary with "libcrypto static".
Additional for "mipsel", "fritz71xx", "fritz73xx" and "fritz74xx" a binary with "libusb".
Additional for "fritz71xx" a binary with "libusb static".
Additional for "x86-32" a binary with "libusb static" and "pcsc static".



This version creates a virtual card reader, which is configured automatically.
You may save the default reader configuration with the webif and then modify it to your own liking.

SoftCam.Key:
OSCam-EMU does not require, but will make use of "SoftCam.Key" if available.
"SoftCam.Key" is searched in the oscam config folder (where oscam.conf is located) and also in "/var/keys".


And a additional WebIf-Design (Carbon V3 for SU 2.5.zip). Unzip and copy TPL-Files to OSCam-Template-Directory.

MfG
HaPeBa
 

iomeali

Registered
Messages
3,962
Iomeali-Oscam-EMU-102-283-10602

Thanks HaPeBa



Special Features:

Pid-File control : without start-parameter "-B" and with "pidfile=[blank]" in oscam.conf --> no Pid-File

WebIf - Readers-/Users-Menu --> Disable-/Enable-Symbol changed

WebIf - Status-Menu --> Skript-/Shutdown-Button "properties" individually programmable via CSS-File
(LI.menu_script ... and/or LI.menu_shutdown ...)

WebIf - Special WebIf-Design included



Oscam Komplett - Minimal:
- "with all" but without ...
- Touch
- OpenSSL
- IPV6
- PCSC
- Smartreader-Support (LibUSB)
- GBox




Explanation of binaries:

arm = Dockstar (Debian), Sheevaplug ...
raspb = RaspBerry (libcrypto static)
arm-coolstream = Coolstream
fritz71xx = Fritzbox 71xx
fritz73xx = Fritzbox 73xx (earlier named only "fritz")
fritz74xx = Fritzbox 74xx
owrt24 = OpenWRT 2.4 (Fritz 32XX, 71XX, 72XX ...)
mca = Matrix Air Cam (libcrypto static)
mipsel = Mipsel Tuxbox (newer Dreams ...)
mipsel-wdtv = Mipsel Tuxbox WDTV
ppc-dbox2 = PPC-Old (Dbox2, Dream500 ...)
ppc-dream = PPC Tuxbox (Dream 600, 7000 ...)
ppc-dream-old = PPC Tuxbox (ältere Dreams mit Gemini, mit libcrypto.so.0.9.7)
sh4 = Golden Media ...
sh4-stapi = Kathi ...
syn-atom = Synologie with Atom CPU
x86-32 = Linux PC's 32 Bit, Igel ...
x86-64 = Linux PC's 64 Bit

Additional for "arm", "raspb", "syn-atom", "owrt24" and "x86-64" a binary with "libusb" and "pcsc".
Additional for "syn-atom" and "mipsel" a binary with "libcrypto static".
Additional for "mipsel", "fritz71xx", "fritz73xx" and "fritz74xx" a binary with "libusb".
Additional for "fritz71xx" a binary with "libusb static".
Additional for "x86-32" a binary with "libcrypto static", "libusb static" and "pcsc static".



This version creates a virtual card reader, which is configured automatically.
You may save the default reader configuration with the webif and then modify it to your own liking.

SoftCam.Key:
OSCam-EMU does not require, but will make use of "SoftCam.Key" if available.
"SoftCam.Key" is searched in the oscam config folder (where oscam.conf is located) and also in "/var/keys".


And a additional WebIf-Design (Carbon V3 for SU 2.7.zip). Unzip and copy TPL-Files to OSCam-Template-Directory.

MfG
HaPeBa
 

hapeba

Registered
Messages
82
NEW (standard svn use another way):

Enable/disable parameter over webif (not with usecache from parameter emmcache)
"Save channelcache" in Config/dvbapi.
"Write emmcache/emmstat to file" in Config/logging.
Default for both: disable.

And for reader "Emulator" please set emmcache to "1,1,2,1"
 

iomeali

Registered
Messages
3,962
Iomeali-Oscam-EMU-103-283-10604

Thanks HaPeBa

Special Features:

Pid-File control : without start-parameter "-B" and with "pidfile=[blank]" in oscam.conf --> no Pid-File

WebIf - Readers-/Users-Menu --> Disable-/Enable-Symbol changed

WebIf - Status-Menu --> Skript-/Shutdown-Button "properties" individually programmable via CSS-File
(LI.menu_script ... and/or LI.menu_shutdown ...)

WebIf - Special WebIf-Design included



NEW:
(Standard OSCam use another way)

Enable/disable parameter over webif (not with usecache from parameter emmcache)
- "Save channelcache" in Config/dvbapi
- "Write emmcache/emmstat to file" in Config/logging
Default for both: disable

And for reader "Emulator" please set emmcache to "1,1,2,1"




Oscam Komplett - Minimal:
- "with all" but without ...
- Touch
- OpenSSL
- IPV6
- PCSC
- Smartreader-Support (LibUSB)
- GBox



Explanation of binaries:


arm = Dockstar (Debian), Sheevaplug ...
raspb = RaspBerry (libcrypto static)
arm-coolstream = Coolstream
fritz71xx = Fritzbox 71xx
fritz73xx = Fritzbox 73xx (earlier named only "fritz")
fritz74xx = Fritzbox 74xx
owrt24 = OpenWRT 2.4 (Fritz 32XX, 71XX, 72XX ...)
mca = Matrix Air Cam (libcrypto static)
mipsel = Mipsel Tuxbox (newer Dreams ...)
mipsel-wdtv = Mipsel Tuxbox WDTV
ppc-dbox2 = PPC-Old (Dbox2, Dream500 ...)
ppc-dream = PPC Tuxbox (Dream 600, 7000 ...)
ppc-dream-old = PPC Tuxbox (ältere Dreams mit Gemini, mit libcrypto.so.0.9.7)
sh4 = Golden Media ...
sh4-stapi = Kathi ...
syn-atom = Synologie with Atom CPU
x86-32 = Linux PC's 32 Bit, Igel ...
x86-64 = Linux PC's 64 Bit

Additional for "arm", "raspb", "syn-atom", "owrt24" and "x86-64" a binary with "libusb" and "pcsc".
Additional for "syn-atom" and "mipsel" a binary with "libcrypto static".
Additional for "mipsel", "fritz71xx", "fritz73xx" and "fritz74xx" a binary with "libusb".
Additional for "fritz71xx" a binary with "libusb static".
Additional for "x86-32" a binary with "libcrypto static", "libusb static" and "pcsc static".



This version creates a virtual card reader, which is configured automatically.
You may save the default reader configuration with the webif and then modify it to your own liking.

SoftCam.Key:
OSCam-EMU does not require, but will make use of "SoftCam.Key" if available.
"SoftCam.Key" is searched in the oscam config folder (where oscam.conf is located) and also in "/var/keys".


And a additional WebIf-Design (Carbon V3 for SU 2.7.zip). Unzip and copy TPL-Files to OSCam-Template-Directory.

MfG
 

iomeali

Registered
Messages
3,962
SU-Oscam-SU-114-EMU-283-713-SB-10641

Thanks HaPeBa

Because of the increased size of the new oscamemu , we had to find a new way to upload the files.

therefore:

instructions:

downloaded the 4 parts of the rar into a folder, and finally click on one of the 4-files

you will automatically redial a big rar containing all oscam for different processors of your devices



Special Features:

Pid-File control : without start-parameter "-B" and with "pidfile=[blank]" in oscam.conf --> no Pid-File

WebIf - Readers-/Users-Menu --> Disable-/Enable-Symbol changed

WebIf - Status-Menu --> Skript-/Shutdown-Button "properties" individually programmable via CSS-File
(LI.menu_script ... and/or LI.menu_shutdown ...)

WebIf - Special WebIf-Design included



NEW:
(Standard OSCam use another way)

Enable/disable parameter over webif (not with usecache from parameter emmcache)
- "Save channelcache" in Config/dvbapi
- "Write emmcache/emmstat to file" in Config/logging
Default for both: disable

And for reader "Emulator" please set emmcache to "1,1,2,1"

Live-Log:
now 10 search-strings and with beep for a positive event



Oscam Komplett - Minimal:
- "with all" but without ...
- Touch
- OpenSSL
- IPV6
- PCSC
- Smartreader-Support (LibUSB)
- GBox



Explanation of sub-directories:

build_dir_arm_cortex_a9 = Cortex A9 CPU example: Receiver (SU980)
build_dir_azbox = Azbox HD Premium/-Plus/Elite
build_dir_nslu2open = ARM NSLU2 OpenWRT
build_dir_brcm63xx = Brcm63xx OpenWRT
build_dir_brcm63xx_other = Brcm63xx OTHER
build_dir_coolstream = Coolstream Box
build_dir_ppcold = DBox2/DMM 500/56x0
build_dir_ppc_dream_old = Older Dreams with Gemini
build_dir_ddwrt346 = DDWRT gcc 3.4.6
build_dir_ddwrt410 = DDWRT gcc 4.1.0 (zb. WNR3500L)
build_dir_dreambox_fpu = DMM 500HD/800SE/7020HD/8000/VU+ (OE 2.0 FPU)
build_dir_mipsel = DMM 500HD/800(SE)/7020HD/7025(+)/8000/VU+ (OE 1.6)
build_dir_mipsoe20 = DMM 500HD/800(SE)/7020HD/7025(+)/8000/VU+ (OE 2.0)
build_dir_mipswdtv = Mipsel Tuxbox WDTV
build_dir_powerpc = DMM 600/7000/7020si(PPC Tuxbox)
build_dir_dockstar = DOCKSTAR (arm)
build_dir_fonera = Fonera Router
build_dir_fritz33xx = Fritzbox 33XX
build_dir_fritz71xx = Fritzbox 71XX
build_dir_fritz72xx = Fritzbox 72XX
build_dir_fritz73xx = Fritzbox 73XX
build_dir_fritz74xx = Fritzbox 74XX
build_dir_fritz73xxOS60 = Fritzbox 73XX OS6.0
build_dir_fritz74xxOS60 = Fritzbox 74XX OS6.0
build_dir_fritz73xxOS62 = Fritzbox 73XX OS6.2
build_dir_fritz74xxOS62 = Fritzbox 74XX OS6.2
build_dir_openpli40 = OpenPLI 4.0 (all mipsel, openssl 1.0)
build_dir_openwrt26 = OpenWRT 2.6
build_dir_openwrt24 = OpenWRT 2.4 (Fritz 32XX,71XX,72XX)
build_dir_openwrt1209aa = OpenWRT 12.09 Attitude Adjustment (ulibc)
build_dir_ppc_eglibc = PowerPC Q or IQ (Synology NAS DS213+/DS413)
build_dir_rasb_hard = Raspberrypi HardFPU
build_dir_rasb_soft = Raspberrypi SoftFPU
build_dir_sheevaplug = Sheevaplug
build_dir_samsungtv = SamsungTV Serie E/F (ES7xxx/8xxx)
build_dir_marv_6281 = Synology Marvell 88F628x
build_dir_mca = Matrix Cam Air
build_dir_tplink = TP-Link 1043ND
build_dir_tplink_backfire = TP-Link Backfire (openwrt/ar71xx)
build_dir_sh_4 = Octagon, Ipbox, Kathrein, Fortis, Spark-Box (additional with stapi)
build_dir_sh4 = UFS-9XX, Kathrein & Octagon (segfaults on some systems) (additional with stapi)
build_dir_syn_atom = Synology with Atom CPU
build_dir_x86_32 = Linux PC's 32 Bit, Igel
build_dir_x86_32_static = Linux PC's 32 Bit, Igel (static versions - libcrypto, libusb and pcsc static)
build_dir_x86_64 = Linux PC's 64 Bit (additional with dvbapi and libcrypto static for ZOTAC ZBOX ID91 OpenELEC)

Additional for "arm", "rasb_hard", "rasb_soft", "syn-atom", "owrt24", "owrt26", "openwrt1209aa", "x86_32" and "x86_64" a binary with "libusb" and "pcsc".
Additional for "syn-atom", "rasb_hard", "rasb_soft", "mca", "mipsel" and "mipsoe20" a binary with "libcrypto static".
Additional for "mipsel", "mipsoe20", "fritz71xx", "fritz72xx", "fritz73xx", "fritz74xx", "fritz73xxOS60", "fritz73xxOS62", "fritz74xxOS60" and "fritz74xxOS62" a binary with "libusb".
Additional for "fritz71xx" a binary with "libusb static".

And additionals WebIf-Designs (Carbon-V3-for-SU_2.7.zip and Classic-Streamboard-Design-SU.zip). Unzip and copy TPL-Files to OSCam-Template-Directory.


MfG
HaPeBa
 

iomeali

Registered
Messages
3,962
Oscam-SU-116-EMU-283-713-SB-10646-komplett

Thanks HaPeBa

Because of the increased size of the new oscamemu , we had to find a new way to upload the files.

therefore:

instructions:

downloaded the 4 parts of the rar into a folder, and finally click on one of the 4-files

you will automatically redial a big rar containing all oscam for different processors of your devices


Special Features:

Pid-File control : without start-parameter "-B" and with "pidfile=[blank]" in oscam.conf --> no Pid-File

WebIf - Readers-/Users-Menu --> Disable-/Enable-Symbol changed

WebIf - Status-Menu --> Skript-/Shutdown-Button "properties" individually programmable via CSS-File
(LI.menu_script ... and/or LI.menu_shutdown ...)

WebIf - Special WebIf-Design included



NEW:
(Standard OSCam use another way)

Enable/disable parameter over webif (not with usecache from parameter emmcache)
- "Save channelcache" in Config/dvbapi
- "Write emmcache/emmstat to file" in Config/logging
Default for both: disable

And for reader "Emulator" please set emmcache to "1,1,2,1"

Live-Log:
now 10 search-strings and with beep for a positive event



Oscam Komplett - Minimal:
- "with all" but without ...
- Touch
- OpenSSL
- IPV6
- PCSC
- Smartreader-Support (LibUSB)
- GBox



Explanation of sub-directories:

build_dir_arm_cortex_a9 = Cortex A9 CPU example: Receiver (SU980)
build_dir_azbox = Azbox HD Premium/-Plus/Elite
build_dir_nslu2open = ARM NSLU2 OpenWRT
build_dir_brcm63xx = Brcm63xx OpenWRT
build_dir_brcm63xx_other = Brcm63xx OTHER
build_dir_coolstream = Coolstream Box
build_dir_ppcold = DBox2/DMM 500/56x0
build_dir_ppc_dream_old = Older Dreams with Gemini
build_dir_ddwrt346 = DDWRT gcc 3.4.6
build_dir_ddwrt410 = DDWRT gcc 4.1.0 (zb. WNR3500L)
build_dir_dreambox_fpu = DMM 500HD/800SE/7020HD/8000/VU+ (OE 2.0 FPU)
build_dir_mipsel = DMM 500HD/800(SE)/7020HD/7025(+)/8000/VU+ (OE 1.6)
build_dir_mipsoe20 = DMM 500HD/800(SE)/7020HD/7025(+)/8000/VU+ (OE 2.0)
build_dir_mipswdtv = Mipsel Tuxbox WDTV
build_dir_powerpc = DMM 600/7000/7020si(PPC Tuxbox)
build_dir_dockstar = DOCKSTAR (arm)
build_dir_fonera = Fonera Router
build_dir_fritz33xx = Fritzbox 33XX
build_dir_fritz71xx = Fritzbox 71XX
build_dir_fritz72xx = Fritzbox 72XX
build_dir_fritz73xx = Fritzbox 73XX
build_dir_fritz74xx = Fritzbox 74XX
build_dir_fritz73xxOS60 = Fritzbox 73XX OS6.0
build_dir_fritz74xxOS60 = Fritzbox 74XX OS6.0
build_dir_fritz73xxOS62 = Fritzbox 73XX OS6.2
build_dir_fritz74xxOS62 = Fritzbox 74XX OS6.2
build_dir_openpli40 = OpenPLI 4.0 (all mipsel, openssl 1.0)
build_dir_openwrt26 = OpenWRT 2.6
build_dir_openwrt24 = OpenWRT 2.4 (Fritz 32XX,71XX,72XX)
build_dir_openwrt1209aa = OpenWRT 12.09 Attitude Adjustment (ulibc)
build_dir_ppc_eglibc = PowerPC Q or IQ (Synology NAS DS213+/DS413)
build_dir_rasb_hard = Raspberrypi HardFPU
build_dir_rasb_soft = Raspberrypi SoftFPU
build_dir_sheevaplug = Sheevaplug
build_dir_samsungtv = SamsungTV Serie E/F (ES7xxx/8xxx)
build_dir_marv_6281 = Synology Marvell 88F628x
build_dir_mca = Matrix Cam Air
build_dir_tplink = TP-Link 1043ND
build_dir_tplink_backfire = TP-Link Backfire (openwrt/ar71xx)
build_dir_sh_4 = Octagon, Ipbox, Kathrein, Fortis, Spark-Box (additional with stapi)
build_dir_sh4 = UFS-9XX, Kathrein & Octagon (segfaults on some systems) (additional with stapi)
build_dir_syn_atom = Synology with Atom CPU
build_dir_x86_32 = Linux PC's 32 Bit, Igel
build_dir_x86_32_static = Linux PC's 32 Bit, Igel (static versions - libcrypto, libusb and pcsc static)
build_dir_x86_64 = Linux PC's 64 Bit (additional with dvbapi and libcrypto static for ZOTAC ZBOX ID91 OpenELEC)

Additional for "arm", "rasb_hard", "rasb_soft", "syn-atom", "owrt24", "owrt26", "openwrt1209aa", "x86_32" and "x86_64" a binary with "libusb" and "pcsc".
Additional for "syn-atom", "rasb_hard", "rasb_soft", "mca", "mipsel" and "mipsoe20" a binary with "libcrypto static".
Additional for "mipsel", "mipsoe20", "fritz71xx", "fritz72xx", "fritz73xx", "fritz74xx", "fritz73xxOS60", "fritz73xxOS62", "fritz74xxOS60" and "fritz74xxOS62" a binary with "libusb".
Additional for "fritz71xx" a binary with "libusb static".

And additionals WebIf-Designs (Carbon-V3-for-SU_2.7.zip and Classic-Streamboard-Design-SU.zip). Unzip and copy TPL-Files to OSCam-Template-Directory.


MfG
HaPeBa
 

iomeali

Registered
Messages
3,962
SU-Oscam-SU-120-EMU-288-715-SB-10648

Thanks HaPeBa

Because of the increased size of the new oscamemu , we had to find a new way to upload the files.

therefore:

instructions
:

downloaded the 4 parts of the rar into a folder, and finally click on one of the 4-files

you will automatically redial a big rar containing all oscam for different processors of your devices



Special Features:

Pid-File control : without start-parameter "-B" and with "pidfile=[blank]" in oscam.conf --> no Pid-File

WebIf - Readers-/Users-Menu --> Disable-/Enable-Symbol changed

WebIf - Status-Menu --> Skript-/Shutdown-Button "properties" individually programmable via CSS-File
(LI.menu_script ... and/or LI.menu_shutdown ...)

WebIf - Special WebIf-Design included



NEW:
(Standard OSCam use another way)

Enable/disable parameter over webif (not with usecache from parameter emmcache)
- "Save channelcache" in Config/dvbapi
- "Write emmcache/emmstat to file" in Config/logging
Default for both: disable

And for reader "Emulator" please set emmcache to "1,1,2,1"

Live-Log:
now 10 search-strings and with beep for a positive event



Oscam Komplett - Minimal:
- "with all" but without ...
- Touch
- OpenSSL
- IPV6
- PCSC
- Smartreader-Support (LibUSB)
- GBox



Explanation of sub-directories:

build_dir_arm_cortex_a9 = Cortex A9 CPU example: Receiver (SU980)
build_dir_azbox = Azbox HD Premium/-Plus/Elite
build_dir_nslu2open = ARM NSLU2 OpenWRT
build_dir_brcm63xx = Brcm63xx OpenWRT
build_dir_brcm63xx_other = Brcm63xx OTHER
build_dir_coolstream = Coolstream Box
build_dir_ppcold = DBox2/DMM 500/56x0
build_dir_ppc_dream_old = Older Dreams with Gemini
build_dir_ddwrt346 = DDWRT gcc 3.4.6
build_dir_ddwrt410 = DDWRT gcc 4.1.0 (zb. WNR3500L)
build_dir_dreambox_fpu = DMM 500HD/800SE/7020HD/8000/VU+ (OE 2.0 FPU)
build_dir_mipsel = DMM 500HD/800(SE)/7020HD/7025(+)/8000/VU+ (OE 1.6)
build_dir_mipsoe20 = DMM 500HD/800(SE)/7020HD/7025(+)/8000/VU+ (OE 2.0)
build_dir_mipswdtv = Mipsel Tuxbox WDTV
build_dir_powerpc = DMM 600/7000/7020si(PPC Tuxbox)
build_dir_dockstar = DOCKSTAR (arm)
build_dir_fonera = Fonera Router
build_dir_fritz33xx = Fritzbox 33XX
build_dir_fritz71xx = Fritzbox 71XX
build_dir_fritz72xx = Fritzbox 72XX
build_dir_fritz73xx = Fritzbox 73XX
build_dir_fritz74xx = Fritzbox 74XX
build_dir_fritz73xxOS60 = Fritzbox 73XX OS6.0
build_dir_fritz74xxOS60 = Fritzbox 74XX OS6.0
build_dir_fritz73xxOS62 = Fritzbox 73XX OS6.2
build_dir_fritz74xxOS62 = Fritzbox 74XX OS6.2
build_dir_openpli40 = OpenPLI 4.0 (all mipsel, openssl 1.0)
build_dir_openwrt26 = OpenWRT 2.6
build_dir_openwrt24 = OpenWRT 2.4 (Fritz 32XX,71XX,72XX)
build_dir_openwrt1209aa = OpenWRT 12.09 Attitude Adjustment (ulibc)
build_dir_ppc_eglibc = PowerPC Q or IQ (Synology NAS DS213+/DS413)
build_dir_rasb_hard = Raspberrypi HardFPU
build_dir_rasb_soft = Raspberrypi SoftFPU
build_dir_sheevaplug = Sheevaplug
build_dir_samsungtv = SamsungTV Serie E/F (ES7xxx/8xxx)
build_dir_marv_6281 = Synology Marvell 88F628x
build_dir_mca = Matrix Cam Air
build_dir_tplink = TP-Link 1043ND
build_dir_tplink_backfire = TP-Link Backfire (openwrt/ar71xx)
build_dir_sh_4 = Octagon, Ipbox, Kathrein, Fortis, Spark-Box (additional with stapi)
build_dir_sh4 = UFS-9XX, Kathrein & Octagon (segfaults on some systems) (additional with stapi)
build_dir_syn_atom = Synology with Atom CPU
build_dir_x86_32 = Linux PC's 32 Bit, Igel
build_dir_x86_32_static = Linux PC's 32 Bit, Igel (static versions - libcrypto, libusb and pcsc static)
build_dir_x86_64 = Linux PC's 64 Bit (additional with dvbapi and libcrypto static for ZOTAC ZBOX ID91 OpenELEC)

Additional for "arm", "rasb_hard", "rasb_soft", "syn-atom", "owrt24", "owrt26", "openwrt1209aa", "x86_32" and "x86_64" a binary with "libusb" and "pcsc".
Additional for "syn-atom", "rasb_hard", "rasb_soft", "mca", "mipsel" and "mipsoe20" a binary with "libcrypto static".
Additional for "mipsel", "mipsoe20", "fritz71xx", "fritz72xx", "fritz73xx", "fritz74xx", "fritz73xxOS60", "fritz73xxOS62", "fritz74xxOS60" and "fritz74xxOS62" a binary with "libusb".
Additional for "fritz71xx" a binary with "libusb static".

And additionals WebIf-Designs (Carbon-V3-for-SU_2.7.zip and Classic-Streamboard-Design-SU.zip). Unzip and copy TPL-Files to OSCam-Template-Directory.


MfG
HaPeBa
 

iomeali

Registered
Messages
3,962
SU-Oscam-SU-125-EMU-288-715-SB-10653-komplett

Thanks HaPeBa

Because of the increased size of the new oscamemu , we had to find a new way to upload the files.

therefore:


instructions:

downloaded the 4 parts of the rar into a folder, and finally click on one of the 4-files

you will automatically redial a big rar containing all oscam for different processors of your devices



Special Features:

Pid-File control : without start-parameter "-B" and with "pidfile=[blank]" in oscam.conf --> no Pid-File

WebIf - Readers-/Users-Menu --> Disable-/Enable-Symbol changed

WebIf - Status-Menu --> Skript-/Shutdown-Button "properties" individually programmable via CSS-File
(LI.menu_script ... and/or LI.menu_shutdown ...)

WebIf - Special WebIf-Design included



NEW:
(Standard OSCam use another way)

Enable/disable parameter over webif (not with usecache from parameter emmcache)
- "Save channelcache" in Config/dvbapi
- "Write emmcache/emmstat to file" in Config/logging
Default for both: disable

And for reader "Emulator" please set emmcache to "1,1,2,1"

Live-Log:
now 10 search-strings and with beep for a positive event



Oscam Komplett - Minimal:
- "with all" but without ...
- Touch
- OpenSSL
- IPV6
- PCSC
- Smartreader-Support (LibUSB)
- GBox



Explanation of sub-directories
:

build_dir_arm_cortex_a9 = Cortex A9 CPU example: Receiver (SU980)
build_dir_azbox = Azbox HD Premium/-Plus/Elite
build_dir_nslu2open = ARM NSLU2 OpenWRT
build_dir_brcm63xx = Brcm63xx OpenWRT
build_dir_brcm63xx_other = Brcm63xx OTHER
build_dir_coolstream = Coolstream Box
build_dir_ppcold = DBox2/DMM 500/56x0
build_dir_ppc_dream_old = Older Dreams with Gemini
build_dir_ddwrt346 = DDWRT gcc 3.4.6
build_dir_ddwrt410 = DDWRT gcc 4.1.0 (zb. WNR3500L)
build_dir_dreambox_fpu = DMM 500HD/800SE/7020HD/8000/VU+ (OE 2.0 FPU)
build_dir_mipsel = DMM 500HD/800(SE)/7020HD/7025(+)/8000/VU+ (OE 1.6)
build_dir_mipsoe20 = DMM 500HD/800(SE)/7020HD/7025(+)/8000/VU+ (OE 2.0)
build_dir_mipswdtv = Mipsel Tuxbox WDTV
build_dir_powerpc = DMM 600/7000/7020si(PPC Tuxbox)
build_dir_dockstar = DOCKSTAR (arm)
build_dir_fonera = Fonera Router
build_dir_fritz33xx = Fritzbox 33XX
build_dir_fritz71xx = Fritzbox 71XX
build_dir_fritz72xx = Fritzbox 72XX
build_dir_fritz73xx = Fritzbox 73XX
build_dir_fritz74xx = Fritzbox 74XX
build_dir_fritz73xxOS60 = Fritzbox 73XX OS6.0
build_dir_fritz74xxOS60 = Fritzbox 74XX OS6.0
build_dir_fritz73xxOS62 = Fritzbox 73XX OS6.2
build_dir_fritz74xxOS62 = Fritzbox 74XX OS6.2
build_dir_openpli40 = OpenPLI 4.0 (all mipsel, openssl 1.0)
build_dir_openwrt26 = OpenWRT 2.6
build_dir_openwrt24 = OpenWRT 2.4 (Fritz 32XX,71XX,72XX)
build_dir_openwrt1209aa = OpenWRT 12.09 Attitude Adjustment (ulibc)
build_dir_ppc_eglibc = PowerPC Q or IQ (Synology NAS DS213+/DS413)
build_dir_rasb_hard = Raspberrypi HardFPU
build_dir_rasb_soft = Raspberrypi SoftFPU
build_dir_sheevaplug = Sheevaplug
build_dir_samsungtv = SamsungTV Serie E/F (ES7xxx/8xxx)
build_dir_marv_6281 = Synology Marvell 88F628x
build_dir_mca = Matrix Cam Air
build_dir_tplink = TP-Link 1043ND
build_dir_tplink_backfire = TP-Link Backfire (openwrt/ar71xx)
build_dir_sh_4 = Octagon, Ipbox, Kathrein, Fortis, Spark-Box (additional with stapi)
build_dir_sh4 = UFS-9XX, Kathrein & Octagon (segfaults on some systems) (additional with stapi)
build_dir_syn_atom = Synology with Atom CPU
build_dir_x86_32 = Linux PC's 32 Bit, Igel
build_dir_x86_32_static = Linux PC's 32 Bit, Igel (static versions - libcrypto, libusb and pcsc static)
build_dir_x86_64 = Linux PC's 64 Bit (additional with dvbapi and libcrypto static for ZOTAC ZBOX ID91 OpenELEC)

Additional for "arm", "rasb_hard", "rasb_soft", "syn-atom", "owrt24", "owrt26", "openwrt1209aa", "x86_32" and "x86_64" a binary with "libusb" and "pcsc".
Additional for "syn-atom", "rasb_hard", "rasb_soft", "mca", "mipsel" and "mipsoe20" a binary with "libcrypto static".
Additional for "mipsel", "mipsoe20", "fritz71xx", "fritz72xx", "fritz73xx", "fritz74xx", "fritz73xxOS60", "fritz73xxOS62", "fritz74xxOS60" and "fritz74xxOS62" a binary with "libusb".
Additional for "fritz71xx" a binary with "libusb static".

And additionals WebIf-Designs (Carbon-V3-for-SU_2.7.zip and Classic-Streamboard-Design-SU.zip). Unzip and copy TPL-Files to OSCam-Template-Directory.


MfG
HaPeBa
 

iomeali

Registered
Messages
3,962
SU-Oscam-SU-127-EMU-288-715-SB-10660-komplett

Thanks HaPeBa

Because of the increased size of the new oscamemu , we had to find a new way to upload the files.

therefore:

instructions:


downloaded the 4 parts of the rar into a folder, and finally click on one of the 4-files

you will automatically redial a big rar containing all oscam for different processors of your devices



Special Features:

Pid-File control : without start-parameter "-B" and with "pidfile=[blank]" in oscam.conf --> no Pid-File

WebIf - Readers-/Users-Menu --> Disable-/Enable-Symbol changed

WebIf - Status-Menu --> Skript-/Shutdown-Button "properties" individually programmable via CSS-File
(LI.menu_script ... and/or LI.menu_shutdown ...)

WebIf - Special WebIf-Design included



NEW:
(Standard OSCam use another way)

Enable/disable parameter over webif (not with usecache from parameter emmcache)
- "Save channelcache" in Config/dvbapi
- "Write emmcache/emmstat to file" in Config/logging
Default for both: disable

And for reader "Emulator" please set emmcache to "1,1,2,1"

Live-Log:
now 10 search-strings and with beep for a positive event



Oscam Komplett - Minimal:
- "with all" but without ...
- Touch
- OpenSSL
- IPV6
- PCSC
- Smartreader-Support (LibUSB)
- GBox



Explanation of sub-directories:


build_dir_arm_cortex_a9 = Cortex A9 CPU example: Receiver (SU980)
build_dir_azbox = Azbox HD Premium/-Plus/Elite
build_dir_nslu2open = ARM NSLU2 OpenWRT
build_dir_brcm63xx = Brcm63xx OpenWRT
build_dir_brcm63xx_other = Brcm63xx OTHER
build_dir_coolstream = Coolstream Box
build_dir_ppcold = DBox2/DMM 500/56x0
build_dir_ppc_dream_old = Older Dreams with Gemini
build_dir_ddwrt346 = DDWRT gcc 3.4.6
build_dir_ddwrt410 = DDWRT gcc 4.1.0 (zb. WNR3500L)
build_dir_dreambox_fpu = DMM 500HD/800SE/7020HD/8000/VU+ (OE 2.0 FPU)
build_dir_mipsel = DMM 500HD/800(SE)/7020HD/7025(+)/8000/VU+ (OE 1.6)
build_dir_mipsoe20 = DMM 500HD/800(SE)/7020HD/7025(+)/8000/VU+ (OE 2.0)
build_dir_mipswdtv = Mipsel Tuxbox WDTV
build_dir_powerpc = DMM 600/7000/7020si(PPC Tuxbox)
build_dir_dockstar = DOCKSTAR (arm)
build_dir_fonera = Fonera Router
build_dir_fritz33xx = Fritzbox 33XX
build_dir_fritz71xx = Fritzbox 71XX
build_dir_fritz72xx = Fritzbox 72XX
build_dir_fritz73xx = Fritzbox 73XX
build_dir_fritz74xx = Fritzbox 74XX
build_dir_fritz73xxOS60 = Fritzbox 73XX OS6.0
build_dir_fritz74xxOS60 = Fritzbox 74XX OS6.0
build_dir_fritz73xxOS62 = Fritzbox 73XX OS6.2
build_dir_fritz74xxOS62 = Fritzbox 74XX OS6.2
build_dir_openpli40 = OpenPLI 4.0 (all mipsel, openssl 1.0)
build_dir_openwrt26 = OpenWRT 2.6
build_dir_openwrt24 = OpenWRT 2.4 (Fritz 32XX,71XX,72XX)
build_dir_openwrt1209aa = OpenWRT 12.09 Attitude Adjustment (ulibc)
build_dir_ppc_eglibc = PowerPC Q or IQ (Synology NAS DS213+/DS413)
build_dir_rasb_hard = Raspberrypi HardFPU
build_dir_rasb_soft = Raspberrypi SoftFPU
build_dir_sheevaplug = Sheevaplug
build_dir_samsungtv = SamsungTV Serie E/F (ES7xxx/8xxx)
build_dir_marv_6281 = Synology Marvell 88F628x
build_dir_mca = Matrix Cam Air
build_dir_tplink = TP-Link 1043ND
build_dir_tplink_backfire = TP-Link Backfire (openwrt/ar71xx)
build_dir_sh_4 = Octagon, Ipbox, Kathrein, Fortis, Spark-Box (additional with stapi)
build_dir_sh4 = UFS-9XX, Kathrein & Octagon (segfaults on some systems) (additional with stapi)
build_dir_syn_atom = Synology with Atom CPU
build_dir_x86_32 = Linux PC's 32 Bit, Igel
build_dir_x86_32_static = Linux PC's 32 Bit, Igel (static versions - libcrypto, libusb and pcsc static)
build_dir_x86_64 = Linux PC's 64 Bit (additional with dvbapi and libcrypto static for ZOTAC ZBOX ID91 OpenELEC)

Additional for "arm", "rasb_hard", "rasb_soft", "syn-atom", "owrt24", "owrt26", "openwrt1209aa", "x86_32" and "x86_64" a binary with "libusb" and "pcsc".
Additional for "syn-atom", "rasb_hard", "rasb_soft", "mca", "mipsel" and "mipsoe20" a binary with "libcrypto static".
Additional for "mipsel", "mipsoe20", "fritz71xx", "fritz72xx", "fritz73xx", "fritz74xx", "fritz73xxOS60", "fritz73xxOS62", "fritz74xxOS60" and "fritz74xxOS62" a binary with "libusb".
Additional for "fritz71xx" a binary with "libusb static".

And additionals WebIf-Designs (Carbon-V3-for-SU_2.7.zip and Classic-Streamboard-Design-SU.zip). Unzip and copy TPL-Files to OSCam-Template-Directory.


MfG
HaPeBa
 
Status
Not open for further replies.
Top