cccam on incubuscamd 0.96

P

peterhansen368

Registered
Messages
3
hi

I have a ipbox 910 HD and have read I can not install cccam EMU at the receiver but have also read that I can run with cccam with incubuscamd but do not know how. I have incubuscamd 0.96 and would like to be able to watch TV with cccam on cardsharing how I do it. try and explain it best because I am a novice in the field.
 
A

astons2

Registered
Messages
41
You need to put your c-line into incubusCamd.conf file. Inside that file you have few examples like this one

Code: 
#card_server_url=cccam://username:[email protected]:15000
Do not forget to remove '#' or it will not work. After you made and saved all changes restart incubus.
 
J

jamie-warez

VIP
Messages
700
and remember you need to make some changes to the default incubusCamd.conf file,

its best to have it like this!!!!
Just make you incubusCamd.conf file blank
and then past all the text below to your blank incubusCamd.conf file

Code: 
background_execution=0
debug_level=2
log_to_console=0
log_to_file=0
logfile_name=/hdd/incubusCamd.log
softcamfile_name=/var/keys/SoftCam.Key
priofile_name=/var/keys/incubusCamd.prio
on_screen_messages_show=1
on_screen_messages_username=root
on_screen_messages_password=taxan0
on_screen_messages_key_update=0
on_screen_messages_wait_for_key_update=0
on_screen_messages_ecm=0
on_screen_messages_emm=0
console_logs_broadcast=0
console_logs_broadcast_port=666
webif=0
webif_port=668
cs_protocol_order=cccam
process_emms_on_cs_mode=1
[Prov:000000:CaID:0000]
check_priority=cs
process_emm_g=1
process_emm_s=1
process_emm_u=1
seca3_handler=0
[Servers]
check_priority=cs
card_server_url=cccam://username:[email protected]:15000

Just change the line
Code: 
card_server_url=cccam://username:[email protected]:15000

to your server info make sure you make it the exact way above.
And also remember to forward the ports in your router like the above port would be 15000
 
Last edited:
A

astons2

Registered
Messages
41
Does anyone know is Incubus works like a emu with DigiTV?
I know it suppose to work but did some have to work?
Thanks!
 
J

jamie-warez

VIP
Messages
700
peterhansen368 said:
how do I get it to run on 2 server because when i run cccam from his 2 server please help me
Click to expand...

Code: 
background_execution=0
debug_level=2
log_to_console=0
log_to_file=0
logfile_name=/hdd/incubusCamd.log
softcamfile_name=/var/keys/SoftCam.Key
priofile_name=/var/keys/incubusCamd.prio
on_screen_messages_show=1
on_screen_messages_username=root
on_screen_messages_password=taxan0
on_screen_messages_key_update=0
on_screen_messages_wait_for_key_update=0
on_screen_messages_ecm=0
on_screen_messages_emm=0
console_logs_broadcast=0
console_logs_broadcast_port=666
webif=0
webif_port=668
cs_protocol_order=cccam
process_emms_on_cs_mode=1
[Prov:000000:CaID:0000]
check_priority=cs
process_emm_g=1
process_emm_s=1
process_emm_u=1
seca3_handler=0
[Servers]
check_priority=cs
card_server_url=cccam://username:[email protected]:15000
card_server_url=cccam://username:[email protected]:15001

Like above should work you can also use just one server the other is just a backup!
 
Last edited:
P

peterhansen368

Registered
Messages
3
I have treid it but I can't get it to work I have delete everything in the config file and set the text in you have sent to me and set my own servers in the 2 last lines what I doing wrong can it was the priority file or the softkey it stands wrong in
 
J

jojo36

Registered
Messages
18
i have also did the above and can not get it to work is there any more help please thank-you
 
H

hawk_claw

Registered
Messages
17
[General]
background_execution=0
debug_level=2
log_to_console=1
log_to_file=0
logfile_name=/var/keys/incubusCamd.log
priofile_name=/var/keys/incubusCamd.prio

on_screen_messages_show=1
on_screen_messages_username=root
on_screen_messages_password=
on_screen_messages_key_update=0
on_screen_messages_wait_for_key_update=0
on_screen_messages_ecm=0
on_screen_messages_emm=0

console_logs_broadcast=0
console_logs_broadcast_port=666


webif=1
webif_port=668

[Prov:000000:CaID:0000]
check_priority=cs,cs,cs
cs_protocol_order=cccam
process_emms_on_cs_mode=1
process_emm_g=1
process_emm_s=0
process_emm_u=0
seca3_handler=0
chid=-1
max_check_uphops=2


[Servers]
card_server_url=cccam://user_name: password@ip-adress: port / yes
# end of file
remove extra spaces in the last line
now i did set it to log to,just type the ip of your receiver followed by :668 to really see whats going on
lets say your receiver ip is 192.168.1.1
go to your web browser and type the address 192.168.1.1:668
this way you well see the log on incubuscamd

hope that helps
 
Last edited:
H

hawk_claw

Registered
Messages
17
make sure that the prio file (incubuscamd.prio) is in the right folder as written in your config file
 
zboard

zboard

Registered
Messages
153
hi

look in the plugins and set it up as on the vodka images u run the cc-cam or the newcs client.
 
J

jamie-warez

VIP
Messages
700
can i ask if this is suitable for the 9000 model?
Click to expand...

Yea m8 but as cliant only works like a charm.
Your Cline needs to be changed a little. and some changes need to be made to the default config file..
 
Last edited:
D

drnaeed

Registered
Messages
20
jamie-wareez said:
Code: 
background_execution=0
debug_level=2
log_to_console=0
log_to_file=0
logfile_name=/hdd/incubusCamd.log
softcamfile_name=/var/keys/SoftCam.Key
priofile_name=/var/keys/incubusCamd.prio
on_screen_messages_show=1
on_screen_messages_username=root
on_screen_messages_password=taxan0
on_screen_messages_key_update=0
on_screen_messages_wait_for_key_update=0
on_screen_messages_ecm=0
on_screen_messages_emm=0
console_logs_broadcast=0
console_logs_broadcast_port=666
webif=0
webif_port=668
cs_protocol_order=cccam
process_emms_on_cs_mode=1
[Prov:000000:CaID:0000]
check_priority=cs
process_emm_g=1
process_emm_s=1
process_emm_u=1
seca3_handler=0
[Servers]
check_priority=cs
card_server_url=cccam://username:[email protected]:15000
card_server_url=cccam://username:[email protected]:15001

Like above should work you can also use just one server the other is just a backup!
Click to expand...
logfile_name=/hdd/incubusCamd.log

This line has mentioned in it hdd but I donot have hdd installed in my CubeRevo-mini
 
You must log in or register to reply here.
Top