Help with Betacrypt 2

Newtman

Registered
Messages
22
Hello,
I have got a card of Betacrypt provider, it work perfect with the original stb...
Azbox Premium HD+ with Multicas and Sbox don´t work and OSCam r10825 with smargo or with phoenix don´t init the card too.
OSCam only show the ATR.
http://pastebin.com/XqXbLFui
Anyone can help me with this card?
I´m fully noob with Betacrypt, me experience is limited to Conax and Irdeto.
Thanks.
 

sega24

Registered
Messages
88
it's Verimatrix CAS based on BetaCrypt v2
LD now support those cards ;)
but no any ...cam where is supported that
i heard that Sbox "private" can share those cards :)

btw do you have season/logger ?
 

Newtman

Registered
Messages
22
it's Verimatrix CAS based on BetaCrypt v2
LD now support those cards ;)
but no any ...cam where is supported that
i heard that Sbox "private" can share those cards :)

btw do you have season/logger ?

I know two cs server of this provider... But they offer only one or two channels. I haven't got clue about how they read the card

I haven't got logger, but I can buy one, is cheap but I haven't got experience with them.
 

conouy

Registered
Messages
21
I know two cs server of this provider... But they offer only one or two channels. I haven't got clue about how they read the card

I haven't got logger, but I can buy one, is cheap but I haven't got experience with them.


Hi friend .. I have betacrypt casid 1720 .... what need to run card . i have dump file ... how extract data to put in oscam .

thz .
please:)
 

conouy

Registered
Messages
21
it's Verimatrix CAS based on BetaCrypt v2
LD now support those cards ;)
but no any ...cam where is supported that
i heard that Sbox "private" can share those cards :)

btw do you have season/logger ?



.... what season/lloger need .. explain ..

and secod .. but not have sbox private .. how read card ?

thz
 

sega24

Registered
Messages
88
you should say "verimatrix not based on betacrypt"

anyway, this is readed from the verimatrix card:

BetaCrypt II-1.2
 

conouy

Registered
Messages
21
ok but how read card ? what need to run ?

not oscam not sbox ... what camd read

what need ...? other site comment need boxkey

boxkey
rsa .... any help

thx
 

crack

Registered
Messages
38
Dear Sega24 .


i request you please give me ur privet skype id...

i need to perchaz sbox privet ver..

please read and replay me on pm ...thanks
 

Hwurst

Registered
Messages
22
The old German Premiere World codet in the Betacrypt 1 System, and the Betacrypt 1 System based on Irdeto, so i think that Betacrypt 2 is the following System.

Tests with your CRD can you do with every Season- Interface- but you need Infos about the Frequenz from your CI-Modul, and the Baudrate.

If the Frequenz to hi, your Baudrate is to hi and an standart PC RS 232 / USC Adapteur cannot read the Data. Only up to 115200 Baud read your PC (Standart). If you need more, you need a Baud Rate sampling Converter (very expensive) or you manipulate your Oscillator (Quarz) in the CI (not so easy).

for example:

CRD- Test/ CI Modul Frequenzen/ BaudRaten:

Unicam 4.0:
Nagra HD + 002/ 003 = 5MHz = 125000
Cryptoworks easy TV = 5 MHz = 125000
Viacess TNT Sat 5 = 5 MHz = 125000
Nagra/ Betacrypt1 PW S02 = 6 MHz = 150000
Conax Technisat = 5 MHz = 125000

Alphacrypt 3,19:
Nagra HD + 002= 3,745MHz = 9600
Cryptoworks easy TV = 3,745 MHz = 9600
Viacess TNT Sat 5 = 3,745 MHz = 9600
Nagra/ Betacrypt1 PW S02 = 6 MHz
Conax Technisat = 3,745 MHz = 9600
Irdeto Euro 1080 = 6 MHz = 150000

Irdeto Frecam 2-020
Betacrypt1 PW C8000 = 4,793 MHz
Nagra/ Betacrypt PW S 02 = 4,392 MHz

(easy to calc: Frequenz / 4 = Baudrate )

Here can you see, that the baudrate by Irdeto Crds is to hi, you need another way to read your CRD- try your Oscam logger... to learn the CRD CMDs.
 

Newtman

Registered
Messages
22
The old German Premiere World codet in the Betacrypt 1 System, and the Betacrypt 1 System based on Irdeto, so i think that Betacrypt 2 is the following System.

Tests with your CRD can you do with every Season- Interface- but you need Infos about the Frequenz from your CI-Modul, and the Baudrate.

If the Frequenz to hi, your Baudrate is to hi and an standart PC RS 232 / USC Adapteur cannot read the Data. Only up to 115200 Baud read your PC (Standart). If you need more, you need a Baud Rate sampling Converter (very expensive) or you manipulate your Oscillator (Quarz) in the CI (not so easy).

for example:

CRD- Test/ CI Modul Frequenzen/ BaudRaten:

Unicam 4.0:
Nagra HD + 002/ 003 = 5MHz = 125000
Cryptoworks easy TV = 5 MHz = 125000
Viacess TNT Sat 5 = 5 MHz = 125000
Nagra/ Betacrypt1 PW S02 = 6 MHz = 150000
Conax Technisat = 5 MHz = 125000

Alphacrypt 3,19:
Nagra HD + 002= 3,745MHz = 9600
Cryptoworks easy TV = 3,745 MHz = 9600
Viacess TNT Sat 5 = 3,745 MHz = 9600
Nagra/ Betacrypt1 PW S02 = 6 MHz
Conax Technisat = 3,745 MHz = 9600
Irdeto Euro 1080 = 6 MHz = 150000

Irdeto Frecam 2-020
Betacrypt1 PW C8000 = 4,793 MHz
Nagra/ Betacrypt PW S 02 = 4,392 MHz

(easy to calc: Frequenz / 4 = Baudrate )

Here can you see, that the baudrate by Irdeto Crds is to hi, you need another way to read your CRD- try your Oscam logger... to learn the CRD CMDs.

Thanks for for help!!
Sega24 sent me a seasson and tested the card by TeamViewer few month ago. He said the baudrate is 140000 but I can't contract him again.
Betacrypt II is based on Verimatrix, not Irdeto
 

paytv

Registered
Messages
659
Betacrypt2 not bassed on verimatrix.verimatrix supportet Betacrypt2 and vcas= verimatrixcas.
 

conouy

Registered
Messages
21
any news ?


Hello friends ..

I'm looking at this box .. Digital Peak VMX3-1 Triple-Tuner High Definition MPEG-2/4 QAM Settop Box with Verimatrix CAS
contains reader for verimatrix ... I assume that this can read this type of card.

someone knows of another box can read verimatrix with support linux and oscam ..
in its specifications does not mention type of reader only mensiona - Clear QAM and Verimatrix
®
CAS
https://www.tonercable.com/pdf/Pico_VMX3-1_Triple-Tuner_with_Verimatrix_CAS.pdf
someone can contribute something for this type of reading ...
 

Newtman

Registered
Messages
22
No way

I thinks is impossible nowaday read this cards.
I does precam and poscam with Sega24 and we saw the conversation was encrypted between the card and the STB.
No more progress after this...

And now I found another provider using green Verimatrix card, CAID 1711 :mecry: Paired and impossible to read with oscam or sbox.
 
Top