Discussion about DvbViewer Pro

mx3000

Registered
Messages
46
big problem in dvbviewer 6.0.3

player 1 day good work

after 24 hours player have problem with record ,can not record

please check this problem and fix it

thanks
 
Last edited:

Ozzyman

Registered
Messages
3
It's not work on windows 7 even after multiple install and reinstall... I have windows 10 laptop and It's working at least but I don't use my skystar on it. So only HLS Streams I watch from it. (For windows 7 there is no conbase.dll and putting from some other windows 10 PC not work.)

On windows 10 I can add manually .ts streams from a m3u file... At least It works without opening VLC/K*** etc
 
Last edited:

Ursache

Registered
Messages
1
For me v6.0.3 it is working just using this crack (no conbase.dll error):
http://www.sat-universe.com/showpost.php?p=2036819681&postcount=139


The recording function it is working in this way for me (I discovered today)!
Find out if "Start in full screen mode" is uncheck! You must not open DVBViewer in full screen or do not switch to full screen!
The recording function will work in normal mode , you can stop - start again but if you switch between normal and full screen recording function is dead and you must close and reopen DVBViewer in order to be able to record again! I hope this information helps and maybe someone else can confirm it!
 

el samak

VIP
Messages
1,941
Hi,

i have new Windows now , installed newest Transedit but i can t analyze a transponder ? why ? , is there any solution ?



regards

 
Last edited:

el samak

VIP
Messages
1,941
LOOL

transedit only work in connection with DVBViewer... that s new for me ... i have a licensed dvbviewer installed 1 min ago, now it s work haha

many thanks
 

serkanguzel

Registered
Messages
1,442
LOOL

transedit only work in connection with DVBViewer... that s new for me ... i have a licensed dvbviewer installed 1 min ago, now it s work haha

many thanks

Thanks @el samak for info.


Well, all friens !!!

Does anyone work cracked version( with Pro v6.0.3 ) on forum? ( @el samak's pointed out issue. )
346th message ; http://www.sat-universe.com/showthread.php?t=75589&page=35


It probably will not work !!!

Because, Connection required.

But try it anyway.
 
Last edited:

serkanguzel

Registered
Messages
1,442

BlackRose56

Registered
Donating Member
Messages
17
hello i have just installed the program 2 timmes and when i run it is says missing combase.dll any solution on this?? i have win7 home premium 64bit
 

ParsianSat

Registered
Messages
100
How can I install motor with USUAL settings? I couldn't find the setting related to motor!

Any Idea is appreciated?
 

ARA$H

Banned
Messages
1,081
Change Log DVBViewer Pro 6.0.4


  • Added: Teletext Window: Navigation tree view showing the available pages and sub-pages. A “+” icon indicates a page with sub-pages, an “S” icon a subtitle page and an “N” icon a news flash page. Please note: The tree view changes the navigation with the arrow keys, page up/down etc. according to the tree view standard behavior. Additionally holding down the Ctrl key lets the Teletext Window respond as before.
  • Change/Added: Teletext Window: The (non-graphical) teletext representation for the visual impaired that appears after activating Options → Extended → Support for visual impaired users is now adjusted to the current window size (thus being more readable for non-impaired users) and provides additional keyboard functions:
Placing the text cursor on a page number and pressing Return switches over to this page. Placing the text cursor on an internet address and pressing Return opens a browser window with the corresponding page (does not work if the address contains a line break). Ctrl + C copies the selected text to the clipboard, Ctrl + A selects the whole teletext page. Ctrl + arrow keys are for teletext navigation (up: previous (sub-)page, down: next (sub-)page, left: back to the last visited page, right: forward).

  • Fix: Teletext: DVBViewer unnecessarily reset the teletext page memory on audio track changes. The Teletext Window content now responds more smoothly to resizing.

  • Change: Teletext Subtitles: They are now synchronized with video according to the broadcasted presentation time stamps (PTS) and displayed at the position and with the color intended by the broadcaster.
  • Added: Subtitles: DVB and teletext subtitles are labeled as “for the hearing impaired” in menus if they are flagged by the broadcaster accordingly.
  • Fix: Subtitles: DVBViewer only remembered the last selected teletext subtitles for a channel. Other subtitle types were excluded.
  • Fix/Change: Subtitle Options: The font size grew after each change on this page and OK/Apply in case of a Windows/Resizer text size greater than 100%, particularly affecting teletext subtitles. Additionally the Subtitle Options have been generally reworked. They don't apply to teletext subtitles anymore (the corresponding settings are now completely covered by the Teletext Options).The misleading Delay setting, that only takes effect under exceptional/error conditions has been moved to Tweaker.exe.
  • Added: Main Window: Toolbar Editor for rearranging and extending the toolbar. It can be opened by right-clicking the toolbar. The icon set selection in the upper part was located on Options → General in previous versions. On the left side it shows the icons (sorted in categories) that are available in the currently selected icon set. The right side shows the icons that are currently assigned to the toolbar including dividers. You may use the buttons or drag & drop to add, delete and rearrange icons.
  • Added: Main Window: VisionX icon set that covers almost all commands that are available in the DVBViewer main window and allows to add them to the toolbar, if VisionX is selected in the Toolbar Editor. Please note that VisionX is a modifiable external icon set on disk (see below).
  • Added: Main Window: Possibility to add external icon sets for the toolbar (also self-made sets). They must comply with the following rules:
    • The icons must be *.png files carrying the internal name of the corresponding DVBViewer action object, e.g. actRecord.png (see the fairly complete VisionX set as example – in case of doubt ask in the DVBViewer forum).
    • The icons must be located in the installation directory (containing DVBViewer.exe) in sub-directories of \Images\Icons\ . The sub-directory names (e.g. \Images\Icons\MyIcons\) appear in the Icon Set drop down list of the Toolbar Editor.
    • If the sub-directory name equals the name of an internal standard set (like “XPedition” or “Vision”) DVBViewer uses the external icons in addition to the internal icons of this set. In this case the external icons must have a size of 16x16. Such extension sets don't need to provide icons for actions that are already covered by the standard set.
    • If the sub-directory name does not match an internal standard set name DVBViewer regards its content as additional independent icon set. It should at least provide icons for the actions covered by the standard sets.
    • Independent Icon sets that contain actRecord.png (for recording the currently played channel) must also contain actRecordStop.png that is shown while the currently played channel is recorded.
    • Icons of independent sets may have any (uniform) square size (e.g. 24x24). If the size is not 16x16 it must be specified in a Settings.ini file contained in the icon set subdirectory. It may also specify the width of separators and a default toolbar assignment that is used when the user clicks the Default Button in the Toolbar Editor. If no Settings.ini is present DVBViewer assumes the following content:
Added: Main Window: Help menu item “Order/Unlock Add-Ons...” that launches KeyTool.exe.
  • Change: Main Window: The signal strength field of the status bar (with four display modes switchable by mouse clicks) has been reworked. The former “None” display mode that showed an empty field has been replaced by a time of day display. Hints have been added for each display mode (elapsed time / remaining time / signal / time of day) indicating its meaning. The elapsed/remaining time modes consider timeshift playback by calculating “now” accordingly. On HLS Internet TV playback they are used for displaying the position in the timeshift buffer provided by the broadcaster. On file playback the signal display mode that formerly only showed 0% now displays the elapsed time as percent value.

  • Added: Recorder/Timeshift: [FONT=Arial, sans-serif]“Remove video filler data” [/FONT][FONT=Arial, sans-serif]now also applies to HEVC video (previously only to H.264 and MPEG2). Thanks to M[/FONT][FONT=Arial, sans-serif]artin K for coding![/FONT]
  • Fix: Timer Recordings: Changing the start time of a Media Server timer in DVBViewer also changed its end time.
  • Change: Timer Recordings: The lead and follow-up time of recordings are now stored internally as separate data fields (previously they had to be reconstructed from the difference of the EPG and timer start and end times). Additionally they are stored in the file timers.xml and are sent to / received from the Media Server.
  • Fix: Timer Recording Window: Several minor issues concerning language files, the selection of control elements with accelerator keys, the activation of buttons, tuner type icons etc.
  • Fix: Recording Statistics Window: The Recordings list wasn't updated on some occasions when it was visible. Recording Status → Context Menu → Delete Recording also deleted a corresponding auto-repeat timer. General cleanup and adjustments, particularly concerning language file entries.
  • Removed: Recorder Options: “MPG with DVD packet size” checkbox that enabled enhanced MPG file recording compatibility with (old) DVD players. The setting is still available as tweak (see Tweaker.exe).
  • [FONT=Arial, sans-serif]F[/FONT][FONT=Arial, sans-serif]ix: [/FONT][FONT=Arial, sans-serif]Recorder:[/FONT][FONT=Arial, sans-serif]A[/FONT][FONT=Arial, sans-serif] wrong (non-existing) [/FONT][FONT=Arial, sans-serif]S[/FONT][FONT=Arial, sans-serif]ervice ID in the channel data [/FONT][FONT=Arial, sans-serif]prevented recordings from starting[/FONT][FONT=Arial, sans-serif]. [/FONT][FONT=Arial, sans-serif]Please note:[/FONT][FONT=Arial, sans-serif]Without a [/FONT][FONT=Arial, sans-serif]correct[/FONT][FONT=Arial, sans-serif] Service ID t[/FONT][FONT=Arial, sans-serif]he recorder output is restricted in [/FONT][FONT=Arial, sans-serif]any [/FONT][FONT=Arial, sans-serif]case. [/FONT][FONT=Arial, sans-serif]Decryption is not possible, [/FONT][FONT=Arial, sans-serif]DVB subtitles and additional audio tracks are not available and the Adjust PAT/PMT option does not take effect. Clients / Players may be unable to play [/FONT][FONT=Arial, sans-serif]the result[/FONT][FONT=Arial, sans-serif]. New debug and recording log entries inform about [/FONT][FONT=Arial, sans-serif]the issue[/FONT][FONT=Arial, sans-serif] (“Service ID not found in PAT”).[/FONT]
  • Added: UPnP Window (Playback → UPnP Server): Optional thumbnail display that can be switched on and off in the context menu of the media list.
  • Fix: UPnP Window: Some minor fixes and adjustments (the window couldn't be closed with Esc, no minimum window size, child nodes were indicated in the left tree for nodes that had no children, language file corrections etc.)
  • [FONT=Arial, sans-serif]Added: TS Stream: Tweak “Automatically create TS Stream devices on demand” (see Tweaker.exe, default “on”). It allows to disable the automatic internal creation of Virtual TS Stream devices in order to limit the streams to the number of manually added TS Stream devices on Options → Hardware.[/FONT]

  • [FONT=Arial, sans-serif]Added: TS Stream (HLS): Temporary storing of (session) cookies and sending them back to the server, thus enabling reception of streams that don't work without it. DVBViewer does not store cookies permanently. They are deleted after the reception of the stream is finished.[/FONT]

  • [FONT=Arial, sans-serif]Fix: [/FONT][FONT=Arial, sans-serif]TS Stream:[/FONT][FONT=Arial, sans-serif] A HTTP host header field as part of an addhdr URL parameter did not replace the host header field created by the Media Server, but was attached as an additional header field. Requesting an AES key for encrypted HLS from the server didn't use the intended user agent string in the HTTP header and ignored an addhdr URL parameter. [/FONT]In order to fix problems with Deluxe Music TV the number of buffered segments (with an intended overall duration/timeshift of 30 seconds) is now based on the actual duration of segments, not on the announced target duration value anymore.

  • Fix: Movie Options: The Clean Up Database button performed a cleanup of the recording database (TVDatabase.db3), not the indicated cleanup of the movie database (MediaDatabase.db3). The main purpose of the movie database is storing the last playback position. Now the clean up works in the following way: Entries referencing a file on the local PC are deleted if the file does not exist anymore. Entries referencing a remote file (by URL, UNC path, network drive) or a removable medium (DVD) are deleted if the object hasn't been played in the past 12 months.

  • Change: General Options: The menu style selection has been removed. All installations are changed to the DVBViewer menu style that supports a user defined font and font size (by means of Resizer.exe). The standard Windows menu style can still be activated by switching the new tweak “Use DVBViewer menu stile” off (see Tweaker.exe).
  • Fix: Input Options: The action Open File=94 (see actions.ini) did not work. Access violations under certain conditions could cause various malfunctions. The command list was not re-translated after a language change.
  • Change: Input Options: The action names in the file action.ini, the default command list and the English language file have been reworked in order to make them more comprehensible. The actions Window Size 40%=2018, Open URL=141 and UPnP Server=142 have been added to the file actions.ini so that keys can be assigned to them. Invalid entries have been removed.

  • Added: Hardware Options: The connection timeout (= maximum waiting time until the server responds) for RTSP Network Devices is now configurable in the settings dialog.
  • Fix: HbbTV: Issues if a HbbTV application was terminated and another one was started because the OSD was closed in between and other problems caused by certain broadcaster habits.

  • Change: Channel Handling: When the channel list is loaded DVBViewer now unifies root and category names with different upper/lowercase in order to avoid inconsistent display at different UI locations, particularly that such categories are merged in the Channel List/ Channel Editor Window, but are displayed separately in the OSD.
  • Added: Actions: New action “FavEdit=10” (see actions.ini). It replaces the former useless “ChanSave=10” that was a duplicate of “ChannelEdit=117”. The new action opens the Channel Editor with active Favorites page.
  • [FONT=Arial, sans-serif]Fix[/FONT][FONT=Arial, sans-serif]/Change: [/FONT][FONT=Arial, sans-serif]Channel Logo Options:[/FONT][FONT=Arial, sans-serif]The “Select Logo” function in the context menu could not assign logos that were located in [/FONT][FONT=Arial, sans-serif]sub-directories of \Images\Logos\. The navigation bar in the file dialog has been removed because [/FONT][FONT=Arial, sans-serif]assigning[/FONT][FONT=Arial, sans-serif] images from other directories [/FONT][FONT=Arial, sans-serif]is[/FONT][FONT=Arial, sans-serif] not possible.[/FONT]
  • [FONT=Arial, sans-serif]Change: [/FONT][FONT=Arial, sans-serif]Media Server Recording[/FONT][FONT=Arial, sans-serif]s[/FONT][FONT=Arial, sans-serif] Playback:[/FONT][FONT=Arial, sans-serif] The Tweak “Method for playing remote recordings” has been redesigned and renamed to “Access mode for remote recordings”. It introduces a new “automatic” mode, [/FONT][FONT=Arial, sans-serif]to which a[/FONT][FONT=Arial, sans-serif]ll DVBViewer installations [/FONT][FONT=Arial, sans-serif]are changed[/FONT][FONT=Arial, sans-serif]. In this mode DVBViewer automatically uses streaming for playback if accessing the recording directly (on hard disk or via network shares/drive) fails. The other fixed modes (1=network shares/UNC path, 2=media server streaming, 3=web server streaming) may let playback start faster. For testing purpose mode 2 and 3 can also be used with a local Media Server on the same PC.[/FONT]
  • Change: Media Server Handling: If DVBViewer is associated with a Media Server on the same PC, it checks if the Media Server is running before trying to connect to it and waiting for a response, thus accelerating the DVBViewer start considerably if the Media Server is offline. Same applies to RTSP Network Devices associated with the local Media Server. Initialization fails immediately if the Server is not running.
  • Added: Media Server Options: Checkbox “Download channel logos from the server”. It enables DVBViewer to request channel logos from an associated Media Server, so they don't have to be installed on the client PC. They are downloaded on demand. Requires the DVBViewer Media Server 3.0.4 or later! Please note that in this case logo assignments cannot be changed on Options → Channel Logos. It has to be done in the Media Server options.
  • [FONT=Arial, sans-serif]Fix: [/FONT][FONT=Arial, sans-serif]Media Server [/FONT][FONT=Arial, sans-serif]Options:[/FONT][FONT=Arial, sans-serif] Possible crash caused by the server detection when leaving the [/FONT][FONT=Arial, sans-serif]Options → [/FONT][FONT=Arial, sans-serif]DVBViewer Media Server Page, particularly if it was entered a very short time before.[/FONT]

  • Updated: DVBViewer Filter to version 3.9.5. The default buffer size has been doubled generally for fixing HEVC / UHD playback issues. If still required the buffer size for HEVC playback can be set independently from the host application by tweaking the file DVBSource.ini (see configuration folder) and adding a line HEVCBufferSize=xxx in the [Params] section, where xxx is the buffer size in KB. In extreme cases a size greater than the default size may be required for 4k HEVC playbackr, e.g. 1024 = 1 MB (see here).
  • Updated: Default Channel and Transponder Lists.
 

ARA$H

Banned
Messages
1,081
Change Log DVBViewer Pro 6.1.0


  • [FONT=Arial, sans-serif]Added: Recorder Options: Separate radio recording format setting. The default is pure MP2 / MP3 / AAC / AC3 audio without TS containers depending on the broadcasted format. The previous general recording format setting now only applies to TV recording and has been renamed accordingly.[/FONT]
  • [FONT=Arial, sans-serif]Removed: Recorder Options: “Adjusted PAT/PMT” checkbox. It is still available as tweak (launch Tweaker.exe for changing it) and switched on by default. It makes sure that the table of contents in TS files specifies the recorded, not the broadcasted elements (like audio tracks, teletext, subtitles), in order to avoid issues with other players than DVBViewer.[/FONT]
  • [FONT=Arial, sans-serif]Added: Timer Recordings: The lead and follow-up time can now be specified / edited individually per timer in the Timer Recordings Window and the corresponding OSD dialog (default skin only). Transferring these values to / receiving them from the DVBViewer Media Server is now fully supported.[/FONT]
  • [FONT=Arial, sans-serif]Change: Timer Recordings: The description and channel IDare now stored as Unicode in the file timers.xml . Please note: This may cause compatibility issues (garbled non-ASCII characters) when reverting to a version before 6.0.4.0.[/FONT]

  • [FONT=Arial, sans-serif]F[/FONT][FONT=Arial, sans-serif]ix: [/FONT][FONT=Arial, sans-serif]Recorder:[/FONT][FONT=Arial, sans-serif] Filename schemes containing backslashes could result in file paths with double backslashes and cause follow-up issues.[/FONT]

  • [FONT=Arial, sans-serif]Fix/Change: Recorder: Better error handling in case of a Service ID in the channel list data that does not match the Service ID in the received data (which previously disabled “all audio tracks” recording).[/FONT]
  • [FONT=Arial, sans-serif]Change/Fix: Recording Database: On database recreation / refresh reading the EPG Info files (.txt) now precedes reading the NTFS file properties of recordings (previously the other way round). This and other measures avoid messed up duration values that were not stored and processed correctly in the past.[/FONT]
  • Change: EPG Window: Parts have been restructured and unified/simplified. The search bar and the button for showing/hiding it are now placed at the bottom. The time bar has been removed. The contained elements (date & time input, Now Button) are now permanently visible at the top. There is one uniform context menu for all tabs (previously three different menus). Time related menu items like “Time +/-” or “Evening” now apply to all tabs (previously only to “EPG at...” and “Timeline”). The additional navigation bar at the top of the TV Guide tab has been removed. The functionality is covered by the permanently visible time navigation and the context menu.
  • [FONT=Arial, sans-serif]Fix: EPG Window: After sorting the content of the “EPG at...” tab by clicking a column title the Details panel showed the wrong EPG item (not the selected one, see here). Additionally numerous functional bugs and inconsistencies have been fixed.[/FONT]
  • [FONT=Arial, sans-serif]Added: UPnP Window: Buttons for copying the URL of UPnP items to the clipboard, playing an item and transferring the displayed items to the DVBViewer playlist, so they can be played successively without having to start the playback of each item individually.[/FONT]
  • [FONT=Arial, sans-serif]Fix: UPnP Window: The window was not able to display Unicode characters, that are not contained in the local character set.[/FONT]
  • [FONT=Arial, sans-serif]Fix: UPnP / OSD: Some flaws on OSD Menu → htpcHome → UPnP, particularly the missing help via OSD Blue (F8) and the non-working automatic display of discovered UPnP servers. The page remained empty unless the user pressed OSD Yellow (F7).[/FONT]
  • Added: Subtitles: Ability to obtain SRT subtitle files associated with video files from the DVBViewer Media Server (requires DMS version 2.1 or later). This also applies to Playback → UPnP Server. They appear in the Settings → Subtitles menu.
  • Added: Subtitles: Ability to recognize multiple SRT files for different languages that are associated with a video file, provided the SRT filenames follow the usual naming convention. If the video filename is movie.mkv, recognized SRT subtitle file names are movie.srt, movie.eng.srt, movie.ger.srt etc. They all appear in the Settings → Subtitles menu.
  • Fix: Subtitles: Several issues concerning SRT subtitles. SRT files with UTF-8 BOM bytes couldn't be read. The subtitle update frequency was too low (once per second) causing bad sync with video and omitted subtitles on fast changes.
  • Fix: Subtitles: DVBViewer did not handle video files with both internal (embedded) and external SRT subtitles correctly (see here).
  • Fix: Subtitle Options: The slider for adjusting the background transparency of SRT subtitles didn't take effect.
  • [FONT=Arial, sans-serif]Added: Teletext Options: Sliders for adjusting the background transparency and outline thickness of teletext subtitles.[/FONT]

  • [FONT=Arial, sans-serif]A[/FONT][FONT=Arial, sans-serif]dded: [/FONT][FONT=Arial, sans-serif]Hardware Options:[/FONT][FONT=Arial, sans-serif] [/FONT][FONT=Arial, sans-serif]The complete device name[/FONT][FONT=Arial, sans-serif] is displayed [/FONT][FONT=Arial, sans-serif]as hint [/FONT][FONT=Arial, sans-serif]on mouse over [/FONT][FONT=Arial, sans-serif]if [/FONT][FONT=Arial, sans-serif]it [/FONT][FONT=Arial, sans-serif]exceeds the list box width.[/FONT]
  • [FONT=Arial, sans-serif]Fix: [/FONT][FONT=Arial, sans-serif]Hardware:[/FONT][FONT=Arial, sans-serif] The connection timeout configured for virtual TS Stream devices was ignored internally.[/FONT]
  • [FONT=Arial, sans-serif]Change: [/FONT][FONT=Arial, sans-serif]Hardware:[/FONT][FONT=Arial, sans-serif] “No hardware available” error message replaced in the English language file by the more meaningful “[/FONT][FONT=Arial, sans-serif]"There is no matching DVB device available for this channel!" [/FONT][FONT=Arial, sans-serif](see [/FONT][FONT=Arial, sans-serif]here[/FONT][FONT=Arial, sans-serif])[/FONT][FONT=Arial, sans-serif].[/FONT]

  • Fix: HbbTV/MHEG5: Measure to enable the coexistence of HbbTV and MHEG services for the same channel. OSD Red (F5) preferably activates HbbTV, if available and enabled. The OSD main menu allows to select HbbTV or MHEG5 (by Christian).

  • Fix: Channel List Views: If the grouping was set to Root + Frequency empty category names were displayed for TS Stream channels (because they have no frequency).

  • Fix: Main Window: Enabling/Disabling the Playback → Playback Rate menu item in the main window did not work as intended. It is supposed to be enabled on DVD playback (except for DVD menus) and for file playback without the DVBViewer Filter.

  • Change/Fix: Media Server Options: The method for sending Wake On LAN to the server PC now conforms more to the standard expected by network devices.

  • Fix: General: The “User Data Error” message box appeared without text. After clicking OK DVBViewer was not terminated properly, but was still running invisibly and had to be terminated with the task manager (see here).
  • [FONT=Arial, sans-serif]Updated: DVBViewer Filter to version 3.9.6 (H.264 format detection enhancements particularly for handling problems with H.264 baseline profile and the LAV Video Decoder in DXVA2 Native mode).[/FONT]
  • [FONT=Arial, sans-serif]Updated:[/FONT][FONT=Arial, sans-serif] Default satellite transponder lists, default satellite and internet channel lists.[/FONT]
 

serkanguzel

Registered
Messages
1,442
.
.

DVBViewer v6.1.1 Demo



Change Log DVBViewer Demo 6.1.1


Fix: EPG Window: The Timeline tab was not updated to “now” when opening the EPG Window. On EPG updates the Timeline view did not keep its vertical scroll state, but jumped to a position where the last selected channel was visible. Additionally the timeline view did not immediately respond to changes in the timer list by displaying scheduled items in red. In certain cases the date displayed at the top did not match the content of the TV Guide tab.

Fix: Channel Editor: The Direct Address button for retrieving the direct URL of a stream without redirections remained hidden in case of HTTPS URLs.

Added: Recorder: SDT data in recordings in addition to EPG data (if configured) enabling VLC to read the EPG.

Fix: Media Server Client: If the configured Media Server address was a name instead of an IP address (except “localhost”), DVBViewer did not resolve it before comparing it with the sender IP address of received Media Server broadcasts/multicasts, thus erroneously discarding prompts for updating the timer and recording list.

Added: Hardware: Support for Elgato Netstream 4C devices.
 
Last edited:

ARA$H

Banned
Messages
1,081
Change Log DVBViewer Pro 6.1.2


  • [FONT=Arial, sans-serif]R[/FONT][FONT=Arial, sans-serif]emoved: [/FONT][FONT=Arial, sans-serif]Recording:[/FONT][FONT=Arial, sans-serif] Writing the EPG data of recording[/FONT][FONT=Arial, sans-serif]s[/FONT][FONT=Arial, sans-serif] as NTFS file properties has been dropped. However, reading file properties on [/FONT][FONT=Arial, sans-serif]recording [/FONT][FONT=Arial, sans-serif]data base updates (if there is no EPG information file) is still supported.[/FONT]
  • [FONT=Arial, sans-serif]Fix: [/FONT][FONT=Arial, sans-serif]Timer Recordings Window:[/FONT][FONT=Arial, sans-serif] Timers could not be edited if the channel was excluded by the filter options of the channel list on the left.[/FONT]
  • [FONT=Arial, sans-serif]Fix: [/FONT][FONT=Arial, sans-serif]Timer Recordings Window:[/FONT][FONT=Arial, sans-serif] [/FONT][FONT=Arial, sans-serif]The timer end time was not displayed if the additional[/FONT][FONT=Arial, sans-serif] follow-up time exceeded midnight (e.g. 23:55 + 10 minutes[/FONT][FONT=Arial, sans-serif]).[/FONT]

  • [FONT=Arial, sans-serif]Fix: Timer Recordings- and EPG-Window: Up/Down buttons in time input fields were displayed too wide if Windows was configured for a large text size (see here).[/FONT]

  • Fix: EPG Window: The “EPG at...” tab did not respond to time selection (e.g. the Now button) if it displayed search results.
  • Added: EPG Window: A pipe character '|' between search items is interpreted as a logical OR, which means, a search for Tom|Jim|Joe will yield search results that contain the name Tom, Jim or Joe. As before blanks between search items are interpreted as logical AND. Thus a search for Tom Jim Joe yields results that contain all three names. AND and OR can be combined: Tom Jim|Joe yields results that contain Tom and Jim or Joe.

  • Change/Fix: EPG: New strategy for handling arriving EPG data in relation to already present data that enhances the EPG update behavior. Additionally potential access violations after EPG data deletion were fixed.
  • Fix/Change: TV/Radio Options: Channel switching with the mouse wheel (see Options → Input → Mouse) only caused MiniEPG changes if “Browse in MiniEPG” was enabled. The “Browse in MiniPG” and “Channel plus/minus switching delay” settings are not mutual exclusive anymore, so the latter can be enabled for channel switching with the mouse even if “Browse in MiniEPG” is enabled for channel switching via keyboard.
  • Change: Wake on LAN: DVBViewer now sends the WOL magic packet via all available network cards (previously the choice was up to Windows), in order to avoid problems with multihomed PCs.

  • Fix: Scanner: Several channels on Astra 28.2° E, 12207 V were erroneously flagged as data channels due to “hide channel duplicates without Freesat EPG” measures.
  • Added: Hardware: Basic support for Unicable 2 (JESS). Options → Hardware → Unicable allows to configure a device for the conventional (EN 50494) or the advanced (EN 50607) Unicable system, that supports up to 32 user bands (slots) and more than 2 satellite positions.

  • Added: Hardware: Support for DigiBest ISDB-T devices (unencrypted channels only, see here).
  • Fix: Hardware: Tuning ATSC frequencies with Hauppauge WinTV-HVR 950Q did not work (see here).
  • Added: Hardware: Support for Freenet (SMiT USB Dongle) DVB-T2 Sticks

  • Change/Fix: Downloader: Several enhancements and fixes particularly concerning the handling of errors, HTTPS and user name/password.
 
Top