EMU Firmware for Ferguson Ariva @Link 200

tani1

Staff member
Super Moderator
Messages
17,767
27-08-2010

EMU Firmware for Ferguson Ariva @Link 200
What is more in shaddy s/w for Ariva @Link 200 ??


After upgrade with shaddy s/w you can download more extras by network:
- link patch
- charts patch
- game patch
- game roms

Remember: once you use shaddy s/w - network update will update with last
avaiable shaddy s/w directly from our servers.

After each update you should restore factory default and re-download all extras.


--------------------------------------------------------------------------------

** CARD SHARING **

How to update all cccam, necamd, etc. settings from USB
please read in attached files:

- sharing_client.txt

- sharing_server.txt



Moreover you can connect via PC to the set to check all card sharing details
(server and client) . Enter http:// (IP address of the set) in your webbrower
to display the oscam web interface. The id and password are: local / local

Oscam web interface:
a. All connection details are displayed if you run the set as server or client
b. In case of connection problems you can also edit the connection (configuration menu)
c. Also, without the text file from USB you can connect to a server or run the set as server.

This is the best solution to check problems or details, in case there are problems.

--------------------------------------------------------------------------------

** MOVIEBOX **

- oryginal s/w content was replaced with powerfull solution to download
last movies and subtitles just with 2 click :
**** OK to download na **** PLAY to watch

Avaiable subtitles are marked in name in brackets (pl,en,de)
All subtitles are downoladed and receiver play automaticly just one
witch is to current OSD language

--------------------------------------------------------------------------------

** MUSICBOX **
- oryginal s/w content was replaced with international charts provided
as mp3 files list !!!

list are updated monthly press OK to download and PLAY to listen

--------------------------------------------------------------------------------

** ARCADE **
- new tab added with some simply games
WARNING: after exit from any game receiver will reboot !!!
So it is done

What's news for this release?

- Fixed cardsharing
- Last official release improvements
 

bozomustafa_68

Registered
Messages
16,935
ALink200_update_10.09_shaddy


Code:
sharingiem version, MovieBox, musicbox, etc., etc. .. 

- This version allows you to downgrade 
- Lots of small improvements in sharing'u 
- And amendments to the original
 

bozomustafa_68

Registered
Messages
16,935
ALink200_update_27.10_shaddy


Code:
sharingiem version, MovieBox, musicbox, etc., etc. .. 

- Improved call *** for SD and HD channels through CCcam 
- And fixes ...
 
Last edited:

rabedu

Registered
Messages
32
Emusoft Ferguson ALink200_update_08.11_shaddy

wersja z sharingiem, moviebox, musicbox itp. itd...

- dodano obsługę kart *** w czytniku (test na SkyUK działa z i bez boxid)


Klick
 

bozomustafa_68

Registered
Messages
16,935
ALink200_update_07.12_shaddy

Code:
- MovieBox and musicbox fixed, Because of bandwidth problems
 
Last edited:

tomek.wysoka

Super VIP
Messages
629
ALink200_update_16.12_shaddy


Games bug fixed.
Important: if you downloaded before the game rom and game patch you have to delete it and download again after the update.

thx: ArivaTeam
 

JAKITAKI

Super VIP
Messages
9,214
ALink200_update_06.01_shaddy

sharing version, MovieBox, musicbox, etc., etc. ..

- CCcam server / client improved
- HD + Black card. Added the CAID 1843 and ROM DNSASP180
 

rabedu

Registered
Messages
32
ALink200_ update_ 28. 01_ shaddy

wersja z sharingiem, moviebox, musicbox itp. itd...

- Same changes as for @link 200 official firmware dd. 28.01.2011.
- Oscam software is improved to run @link 200 as Server or client for CS.
- All ‘Link patches’ are re-activated to operate moviebox and musicbox.
- When watching a movie from moviebox during download and exit it, it returns now faster to the list and it is not necessary to input the PIN code again.
- The problem, that reboot of the set takes very long has been fixed. This delay was caused by a corrupted script which checks during reboot if a new software is available.

 

rabedu

Registered
Messages
32
ALink200_update_01.02_shaddy

ImageSame changes as for @link 200 official firmware dd. 05.01.2011
ImageOscam software is improved to run @link 200 as Server or client for CS


Klick
 

Serjoga

Latvian satfat
Staff member
Moderator
Messages
6,069
Fixed problems

1) Recording Problem with HD+ channels that only the folder is created but no recording is made is fixed.
2) File browser corrupt font problem when changing between storage devices is fixed.
3) Timer recording from standby problem that after the recording is finished the device does not turn again into
standby is fixed.
4) Astra 19.2 TP list updated (SKY Deutschland)
5) Multifeed problem, that it changes again to the previous channels after you select Exit for the list is fixed.
6) Modified for Cyfra+ HD Fast scan for the TPs which were not searched.
 

rabedu

Registered
Messages
32
Neue Emusoft Ferguson @Link200_ 21. 02.2011_shaddy

DvbXt®eme version: 21.02.2011

- Dieselben Änderungen wie @link 200 Official Firmware vom 21.02.2011


Klick
 

JAKITAKI

Super VIP
Messages
9,214
ALink200_update_03.06_shaddy(18.72 MB)

- New feature in movie box added 'TV Series'. The latest original TV Series from the US are available for download with english, german, polish and czech subtitles. To display the list, press 'blue' key.

********DOWNLOAD<<<<<
 

JAKITAKI

Super VIP
Messages
9,214
111800.png
Special software version Recovery
111800.png


Method for repairing the USB:

- Extract the two files are a special version of recovery to an empty USB flash drive
- Switch off the receiver and connect ONLY ONE USB (in @ 200 can not be that internal!)
- Press and hold the front panel, press "up arrow"
- And turn the power ...
- After a while the display shows "update start" let go of the key "arrow up"
- Wait about 15 minutes (on the display "******** ERASE" "WRITE ********"
- And we have cleared the flash memory / receiver placed

****> ALink200_04.07_shaddy-Recovery
****> ALink100_04.07_shaddy-Recovery
****> ALinkTT_04.07_shaddy-Recovery
 

Janro

Registered
Messages
16
Ariva@link200 wil not boot up

I was very happy when I read that there was a possibillity to recover an Ariv@link200.

About a year ago my Ariv@link200 just stopped to work. The only thing happen was a lot of blue rectangles on the display. At that time I still had warranty on the Ariv@link200 so I sent it back to the Supplier. After a month I got it back. Since that day the Ariv@link200 has been working, until today. Now I have the same fault again.

Now I am trying to use the program in this link to recover my Ariv@link200. But when I turn it on, there are only blue rectangles on the display.

My question is: Am I doing the right thing?
(English is not my native language, so I may missundestand the instuctions)

I have turned the power off, with the powerswitch on the backside of Ariv@link200. After that I push the button with the arrow up on the front of the Ariv@link200. (The one to the right place on the panel). After that I turn the powerswitch on, at the backside of the Ariv@link200. I have been waiting up to one minute with the button pressed, but nothing happens.

Is there any possibillity to download the program with a PC to the Ariv@link200 with RS232, as it is with Ariva200?

I know that there is no COM-port on the backside but perhaps there is a connection inside, because Ferguson could fix my Ariv@link200 the first time it happened
 

Janro

Registered
Messages
16
Now I have managed to recover my Ariva@link200

This is how I did, just in case somebody have the same problem I had.

1) I opened the cover of Ariva@link200 and removed the internal USB-stick
2) I formatted an USB-stick with FAT 32 without giving it a name
3) I copied the two files from "ALink100_04.07_shaddy-Recovery" to the formatted USB-stick
4) I put the USB-stick in the front USB-connector of Ariva@link200
5) I pressed the button with the up-arrow
6) I turned on the power on the backside of Ariva@link200
7) There came up blue squares on the display, There was no text.
8) I released the button and left the power on for about 20 minutes.
9) I turned the power of and removed the USB-stick.
10) When I turned the power on the text "Boot loader" came up on the display.
11) After that it was possble to restart Ariva@link200 with the remotecontrol again.
12) All my channellists were OK (First I was sure that they should be gone)
13) One other thing. I had an older software vesion at the crash. Now I have 04.07 shaddy Ariva@link200
 

elgeneral

Registered
Messages
7,811
Nowa wersja 28.11.2012

Do pobrania jak zwykle:

- poprawki jak w oryginale (tylko?/a¿! :lol: )

Uwaga: po aktualizacji konieczne jest przywrócenie ustawieñ fabrycznych i tzw. twardy reset wy³±cz/w³±cz !

I removed your post, link download no respect SU rules

also you need write in english lenguaje
 
Top