How to install the image for DM520 HD

mgharbawy

Registered
Messages
69
Dear all,
May I know what is the steps and the program I use to setup a new image on the DM520 HD please.
 

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,480
1) Download the firmware that you want to install: DOWNLOAD
2) Make sure that the firmware is xxxxx.tar.xz,
3) Power-down the box in the power switch in the back,
4) Turn on the power and quickly press and hold the standby button, the standby light on the box will flash red/purple flashes and when the button is permanently red, please let it go,
5) Memorize the IP that appears on the TV screen,
6) Now on your web browser on your PC enter the IP of your box,
7) Now, press the "Firmware Upload" and Browse the firmware that you want and start the flash process.
8) Press Start and wait till it finish and then press "click here to Reboot" and it´s done.
 

mgharbawy

Registered
Messages
69
Thanks for your reply, but something very strange happen when I start my PC web browser with the IP of the dreambox it start with the channels info and there is no way to find firmware upgrade.
Now what can I do
 

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,480
Think your on the web ui

You need to follow the instruction to the letter and you need the box connected via ether cable wifi wont work
 

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,480
Are you keeping the front power button pressed till you see an IP address on your TV screen >
 
Top