Oscam and t@ndberg

Informed® · Jul 29, 2016

Hello everyone
Enigma1 series oscam emu tandberg keys to work? Thanks.

kebien · Aug 1, 2016

No luck here either
The message is

Code:

2016/08/01 17:45:50 4B9A99E5 c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 1010 ECM_PID: 0259 PROVID: 000000 
2016/08/01 17:45:50 4B9A99E5 c   (dvbapi) Demuxer 0 stream Videostream (MPEG-4)(type: 1b pid: 0065 length: 0)
2016/08/01 17:45:50 4B9A99E5 c   (dvbapi) Demuxer 0 stream Audiostream (MPEG-2)(type: 0f pid: 0066 length: 0)
2016/08/01 17:45:50 4B9A99E5 c   (dvbapi) Demuxer 0 stream Audiostream (MPEG-2)(type: 0f pid: 0067 length: 0)
2016/08/01 17:45:50 4B9A99E5 c   (dvbapi) Demuxer 0 found 1 ECMpids and 3 STREAMpids in caPMT
2016/08/01 17:45:50 4B9A99E5 c   (dvbapi) Demuxer 0 serving srvid 0001 (AmericaTV HD S1) on adapter 0000 camask 0001 index 0000 pmtpid 0064
2016/08/01 17:45:50 4B9A99E5 c   (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 1010 PROVID 000000 ECMPID 0259 ANY CHID PMTPID 0064 VPID 0065
2016/08/01 17:45:50 4B9A99E5 c   (dvbapi) Demuxer 0 stream Videostream (MPEG-4)(type: 1b pid: 0065 length: 22)
2016/08/01 17:45:50 4B9A99E5 c   (dvbapi) Demuxer 0 stream Audiostream (MPEG-2)(type: 0f pid: 0066 length: 19)
2016/08/01 17:45:50 4B9A99E5 c   (dvbapi) Demuxer 0 stream Audiostream (MPEG-2)(type: 0f pid: 0067 length: 19)
2016/08/01 17:45:50 4B9A99E5 c   (dvbapi) Demuxer 0 found 1 ECMpids and 3 STREAMpids in PMT
2016/08/01 17:45:50 4B9A99E5 c   (dvbapi) Demuxer 0 serving srvid 0001 (AmericaTV HD S1) on adapter 0000 camask 0001 index 0000 pmtpid 0064
2016/08/01 17:45:50 2ECA0463 p  (constcw) Searching CW for CAID 1010 PROVID 000000 SRVID 0001 ECMPID 0259 PMTPID 0064 VPID 0065
2016/08/01 17:45:50 4B9A99E5 c      (ecm) marwen (1010@000000/0000/0001/1B:4CAB7290776E7DFF5ADE3D075C0F9939): rejected reader sid (13 ms) by SoftCam.Key - AmericaTV HD S1
2016/08/01 17:45:51 4B9A99E5 c   (dvbapi) Demuxer 0 restarting decodingrequests after 4 ms with 1 enabled and 0 disabled ecmpids!
2016/08/01 17:45:51 4B9A99E5 c   (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 1010 PROVID 000000 ECMPID 0259 ANY CHID PMTPID 0064 VPID 0065
2016/08/01 17:45:51 4B9A99E5 c      (ecm) marwen (1010@000000/0000/0001/1B:4CAB7290776E7DFF5ADE3D075C0F9939): rejected reader sid (5 ms) by SoftCam.Key - AmericaTV HD S1
2016/08/01 17:45:52 4B9A99E5 c   (dvbapi) Demuxer 0 restarting decodingrequests after 5 ms with 1 enabled and 0 disabled ecmpids!
2016/08/01 17:45:52 4B9A99E5 c   (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 1010 PROVID 000000 ECMPID 0259 ANY CHID PMTPID 0064 VPID 0065
2016/08/01 17:45:52 00000000   **** OSCam <<  cardserver log switched, version 1.20-SU-r313-EMU-r333-728, build r11209 (mipsel-unknown-linux-gnu)
2016/08/01 17:45:52 4B9A99E5 c      (ecm) marwen (1010@000000/0000/0001/1B:4CAB7290776E7DFF5ADE3D075C0F9939): rejected reader sid (5 ms) by SoftCam.Key - AmericaTV HD S1
2016/08/01 17:45:53 4B9A99E5 c   (dvbapi) Demuxer 0 restarting decodingrequests after 15 ms with 1 enabled and 0 disabled ecmpids!
2016/08/01 17:45:53 4B9A99E5 c   (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 1010 PROVID 000000 ECMPID 0259 ANY CHID PMTPID 0064 VPID 0065
2016/08/01 17:45:53 4B9A99E5 c      (ecm) marwen (1010@000000/0000/0001/1B:4CAB7290776E7DFF5ADE3D075C0F9939): rejected reader sid (5 ms) by SoftCam.Key - AmericaTV HD S1

I tried suggested things,still no go.

Readers

Code:

[reader]
label                         = oscam_emu
protocol                      = emu
device                        = emulator
caid                          = 1010,0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
detect                        = cd
ident                         = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000;1010:000000
group                         = 1
auprovid                      = 001010

[reader]
label                         = SoftCam.Key
protocol                      = constcw
device                        = /etc/tuxbox/config/SoftCam.Key
caid                          = 1010,0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
ident                         = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000;1010:000000
group                         = 2
auprovid                      = 001010

[reader]
label                         = constant.cw
protocol                      = constcw
device                        = /etc/tuxbox/config/constant.cw
caid                          = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
ident                         = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000
group                         = 3

[reader]
label                         = oscam.keys
protocol                      = constcw
device                        = /etc/tuxbox/config/oscam.keys
caid                          = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
ident                         = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000
group                         = 4

[reader]
label                         = oscam.constant.cw
protocol                      = constcw
device                        = /etc/tuxbox/config/oscam.constant.cw
caid                          = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
ident                         = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000
group                         = 5

[reader]
label                         = CCcam_1
description                   = CCcam
enable                        = 0
protocol                      = cccam
device                        = host
user                          = user
password                      = password
inactivitytimeout             = 30
caid                          = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
ident                         = 1010:000000
group                         = 1
cccversion                    = 2.1.4

[reader]
label                         = CCcam_2
description                   = CCcam
enable                        = 0
protocol                      = cccam
device                        = host
user                          = user
password                      = password
inactivitytimeout             = 30
group                         = 1
cccversion                    = 2.1.4

[reader]
label                         = Newcamd
description                   = Newcamd Example
enable                        = 0
protocol                      = newcamd
device                        = server
key                           = 0102030405060708091011121314
user                          = username
password                      = password
group                         = 1

[reader]
label                         = Camd3
enable                        = 0
protocol                      = cs357x
device                        = server
user                          = user
password                      = pass
caid                          = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
ident                         = 1010:000000
group                         = 1

Can anyone help?

SteelCold · Aug 1, 2016

@kebien
delete all emu readers
restart oscam-emu,a new emu reader will be auto-created
if this reader does not have caid 1010 -> your oscam-emu is too old, you need a newer one
if the reader has caid 1010 -> all ok, make sure keys are in SoftCam.Key

kebien · Aug 2, 2016

I will do that.
I did replace oscam with latest in /usr/bin.
Funny thing is after killing enigma still decoding powervu.
Would the image has embedded emu? I doubt it,but will check further.
I did as you suggested and no ca id 1010 listed,so,I am removing the ipk and replacing with newer version.

jan55 · Aug 2, 2016

You do not need 5 emu reader's in oscam

you can assign to each group a separate and more user on one reader only

Code:

[reader]
label = oscam_emu
protocol = emu
device = emulator
caid = 1010,0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000;1010:000000
group = 1,2,3,4,5

perrari · Aug 2, 2016

I would like to know if oscam 11271 as well as Tandberg if it works with PowerVu. Thank you

kebien · Aug 2, 2016

shishmish said:

You do not need 5 emu reader's in oscam

you can assign to each group a separate and more user on one reader only

Code:

[reader]
label = oscam_emu
protocol = emu
device = emulator
caid = 1010,0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000;1010:000000
group = 1,2,3,4,5

Thank you
I didn't make all those readers,they show up after installing ipk from blackhole server.
I installed one labeled powervu and oscam is working,but not on tandberg,I replaced with 11272 and 11271 and those give me no picture,but logs are ok,showing decoding on powervu,nothing on tandberg.
This is getting tricky,very weird

jan55 · Aug 2, 2016

you try with this conf to reader and write correct format keys in SoftCam.key

Code:

[reader]
label = SoftCam.Key
protocol = constcw
device = /etc/tuxbox/config/SoftCam.Key
caid = 1010,0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000;[COLOR="Blue"]1010:000000,00FFFF[/COLOR]
group = 1

kebien · Aug 2, 2016

Using this reader i get the same

Code:

(ecm) anonymous (1010@000000/0000/0001/1B:218787CF52049BEA4A3B10228BF97228): rejected reader sid (13 ms) by SoftCam.Key -

So far all tandberg behaves the same,rejected sid

dray1 · Aug 3, 2016

if you user oscam.dvbapi file search if there is a line like this

I: 1010:000000

and delete it , also add this

P: 1010:000000

if there is not a P: 1010 line then just add the P: 1010:000000
and restart your oscam .

Also try to restart your oscam manual with telnet

killall -9 oscam
/usr/bin/oscam --config-dir /etc/tuxbox/config/oscam &

kebien · Aug 3, 2016

dray1
I tried,all same result.

I generally understand oscam,but I have never seen this rejected sid by a reader.
Consequently,I do not know where is originated and cannot fix it.
It gives me the same message with any reader for tandberg channels.
This is an original dm800,using blackhole 3.0.2.
I assume nothing is wrong with the image or kernel version mismatch for oscam.
is there any switch for command line start that could show me debug info for readers? I am using 64 for logging,maybe higher would show me this?

If anyone could pass on the config folder , by pm , I would be able to see if there are differences and what file and setting is causing this.
No need a softcam file.

SteelCold · Aug 3, 2016

the auto-created emu reader must have caid 1010. if it does not have caid 1010 this means the oscam-emu is too old, and it will never work.

if you cannot find any ipk with new oscam-emu, you can always install the old ipk, and then replace the oscam binary, usually found in /usr/bin with a newer one.

to do this:
1) install old oscam-emu ipk
2) stop oscam
3) replace oscam binary with newer one
4) start oscam

kebien · Aug 3, 2016

SteelCold
I did that already,mentioned in prior of my posts.
Installed one powervu version from blackhole server,then later replaced the binary with newer one,and not even powervu was working,later made it work.

I have tried removing the readers,and older version would not create the entry for 0101 caid.
So,I updated to 11272 version and it should be ok,but is not.
I can decrypt fine powervu and biss,for example,only tandberg is the problem of the rejected sid.
I will keep on trying,I really want to find out what is creating this problem.

I will try to remove the readers again with the new version.

SteelCold · Aug 3, 2016

Rejected sid maybe be caused by the loadbalancer cache.

To reset the cache:
Webif: Config -> Loadbalancer -> Clear stats

Or: rejected sid may also be caused by wrong services configuration.

kebien · Aug 3, 2016

I downloded oscam from here,it should be ok,right?
Problem is all this emu do not produce a reader that has caid 1010,while I assume is the last one,it might not be.
Where is a confirmed working emu?
http://www.sat-universe.com/showpost.php?p=2036685738&postcount=454

sirius123 · Aug 3, 2016

Oscam r11267

kalehrl · Aug 3, 2016

oscam.user:

Code:

[account]
user                          = localuser
group                         = 1

oscam.server:

Code:

[reader]
label                         = emulator
protocol                      = emu
device                        = emulator
caid                          = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect                        = cd
ident                         = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group                         = 1
emmcache                      = 2,1,2,1
emu_auproviders               = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000

oscam.conf:

Code:

[global]
logfile                       = stdout
waitforcards                  = 0

[streamrelay]
stream_relay_enabled          = 0

[dvbapi]
enabled                       = 1
pmt_mode                      = 6
delayer                       = 60
user                          = localuser
read_sdt                      = 1
boxtype                       = dreambox

[webif]
httpport                      = 16004
httprefresh                   = 10
httpallowed                   = 127.0.0.1,192.168.0.0-192.168.255.255

Put softcam.key in /usr/keys

SteelCold · Aug 3, 2016

kebien said:
Problem is all this emu do not produce a reader that has caid 1010

Then they are too old.
Important: oscam version like r11272 does not include the emu version. To check emu version, show entitlements of the emu reader in webif, it will show at the top:
Serial
00 07 32 00

-> this means emu version 732
you need at least version 732, if it is 731 or less, it is too old.

kebien · Aug 3, 2016

SteelCold
That has to be the problem
I will look for that version

kebien · Aug 3, 2016

Well,I think it is coming down to emu version.
The highest version I tested is 728,and can't find one binary with version 732 or higher.

Oscam and t@ndberg

Informed®

Softcamaster™

kebien

Registered

SteelCold

kebien

Registered

jan55

Member

perrari

kebien

Registered

jan55

Member

kebien

Registered

dray1

kebien

Registered

SteelCold

kebien

Registered

SteelCold

kebien

Registered

sirius123

Registered

kalehrl

Registered

SteelCold

kebien

Registered

kebien

Registered