Oscam-emu now supports powervu without streamrelay (on dreambox only...)

oscam r1105 mips confirm working on spark st7111/7162,,please try if you have spark box

alfred_1 said:

cancel

Click to expand...

Tkyu, this's work in my matrix turbo III spark: image Taapat-nfrarp

Can anyone please post the link to full installer of an oscam (no need EMU) with all the dir's required and all the files required + the script for a start?
My oscam doesn't show in softcam section
OE1.6 please..

DM8000 GeminiP3.2 0E2.0 script file Please...

If you write the red zone called your Oscam , you have your script.

It is for OE2.0:thum:

tent said:

DM8000 GeminiP3.2 0E2.0 script file Please...

Click to expand...

All ok

on scam if i want to convert my cccam file .cfg to oscam c lines go in oscam.server and f lines on oscam.user but each reaer of oscam.server has to be different group or can i call each reader "c line" the same number of group?

metalizer2k said:

oscam r1105 mips confirm working on spark st7111/7162,,please try if you have spark box

Click to expand...

Working on STI7111/7162 running in spark ou enigma2?
Thanks

Tested on dm800hd clone..working fine without streamrelay..sd running good but Hd need something to work it..anyway it so good guy
image tested-blackhole 2.1.7 oe2

satfan_cn said:

OpenPLi-3.0-beta-dm800-20150717-ssl84d.nfi

secondstage.nfi

Step1, flash OpenPLi-3.0-beta-dm800-20150717-ssl84d.nfi
Step2, flash secondstage.nfi
Step3, restart dreambox,
Step4, replace oscam and upload config&softcam.key
Hope to help you

Click to expand...

##TESTED##
working good on dm800hd clone without streamrelay
image-blackhole2.1.7
sd channel working fine..hd channel lag
waiting fr a new patch

plachta said:

If you write the red zone called your Oscam , you have your script.

It is for OE2.0:thum:

Click to expand...

@plachta,



The following criteria, can you write more clear ? Please.

I do not fully understand.

If possible, a few figures. And with the required marking.

Regards.

This is normaly script,if it does not own and can use another just name overwrites imported oscam.
Now I tested the new OSCAM 11108 and there is the same audio problem

plachta said:

This is normaly script,if it does not own and can use another just name overwrites imported oscam.

Click to expand...

Yes. "Blackhole" set up to oscam ipk, but did not open the PowerVU.

Replace bin file etc... Unfortunately don't work.

Can you more clearly, detailed description/expression ?

Or running script file. ( For BlackHole )

What's in the log say? ..... you'll find if everything is correct.Must load right firmware "serkanguzel"

2015/11/10 11:25:05 00000000 s (config) 5 provid's loaded
2015/11/10 11:25:05 00000000 s (config) 30 service-id's loaded in 1 ms
2015/11/10 11:25:05 00000000 s (reader) oscam_emu [emu] creating thread for device 192.168.0.120
2015/11/10 11:25:05 00000000 s (reader) SoftCam.Key [constcw] creating thread for device /etc/tuxbox/config_ymod/SoftCam.Key
2015/11/10 11:25:05 00000000 [Emu] info: FFDecsa parallel mode = 64
2015/11/10 11:25:05 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2015/11/10 11:25:05 00000000 s (main) waiting for local card init
2015/11/10 11:25:05 1E8EE861 p (constcw) Local reader: SoftCam.Key (file: /etc/tuxbox/config_ymod/SoftCam.Key)
2015/11/10 11:25:05 34005365 r reading key file: /etc/tuxbox/config_ymod/SoftCam.Key
2015/11/10 11:25:05 1E8EE861 p (reader) SoftCam.Key [constcw] proxy initialized, server /etc/tuxbox/config_ymod/SoftCam.Key:0
2015/11/10 11:25:05 34005365 r (reader) oscam_emu [emu] Reader initialized (device=192.168.0.120, detect=cd, mhz=357, cardmhz=357)
2015/11/10 11:25:05 186515B9 h (webif) webif: decompressed 181712 bytes back into 417616 bytes
2015/11/10 11:25:05 186515B9 h (webif) HTTP Server running. ip=0.0.0.0 port=8888
2015/11/10 11:25:06 34005365 r (reader) oscam_emu [emu] card detected
2015/11/10 11:25:07 34005365 r (reader) oscam_emu [emu] found card system emu
2015/11/10 11:25:07 34005365 r (reader) oscam_emu [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/11/10 11:25:07 34005365 r reading key file: /etc/tuxbox/config_ymod/SoftCam.Key
2015/11/10 11:25:08 00000000 s (main) init for all local cards done
2015/11/10 11:25:08 00000000 s (emmcache) loading emmcache disabled
2015/11/10 11:25:08 00000000 s (emmcache) loading emmstat disabled
2015/11/10 11:25:08 00000000 s (anticasc) anti cascading disabled
2015/11/10 11:25:08 322E8EE4 c (client) plain dvbapi-client granted (anonymous, au=off)
2015/11/10 11:25:08 322E8EE4 c (dvbapi) loading channelcache disabled
2015/11/10 11:25:08 322E8EE4 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
2015/11/10 11:25:11 322E8EE4 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0E00 ECM_PID: 1F78 PROVID: 000000
2015/11/10 11:25:11 322E8EE4 c (dvbapi) Demuxer 0 found 1 ECMpids and 4 STREAMpids in PMT
2015/11/10 11:25:11 322E8EE4 c (dvbapi) Demuxer 0 serving srvid 09CA (Discovery HD Showcase Europe) on adapter 0000 camask 0001 index 0000 pmtpid 0A24
2015/11/10 11:25:11 322E8EE4 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1F78 ANY CHID PMTPID 0A24 VPID 09C4
2015/11/10 11:25:11 1E8EE861 p (constcw) Searching CW for CAID 0E00 PROVID 000000 SRVID 09CA ECMPID 1F78 PMTPID 0A24 VPID 09C4
2015/11/10 11:25:11 322E8EE4 c (ecm) anonymous (0E00@000000/0000/09CA/40:B0F47313568EE231E79C9F387C3328D8): found (5 ms) by oscam_emu (P/2/2/2) - Discovery HD Showcase Europ

Working fine with DM800se ferrari clone on Open PLI 2.1 oe1.6

Versions above the 11076 not working most AC3 audio channels.

##TESTED##
DM800HD
Image OpenPli4 ssl84d
SD/HD Working Perfect with no lag
without streamrelay
Thanks to EngineerKhan

where did you find the softcam.key files because i think i cant get now works only for that becuase before were working

Is this solution still only for Dreamboxes or have other boxes been added too?

Other boxes still only with stream relay option.