Dreambox 800 SIM 2.01 # 76D Images Needed

aliraza63

aliraza63

Senior Member
Messages
466
YES LNB IS 100% CONFIRMED OK. YES I ALSO THINK MAY BE THE HARDWARE ERROR BUT SOMETHING UNABLE TO UNDERSTAND WHEN I SEE THE SAT FINDER THERE ARE DETAIL IS AS LIKE
SATELLITE : 75 EAST
SNR : 62%
AGC : 85%
BER : 138 TO 175
IF ITS THE HARDWARE FAULT THEN WHY ITS SHOWING THE SINGAL PROPERTY WITH THIS DETAIL IT SHOULD BE 0% THERE THEN.
 
Ferret

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,543
62% is a little low maybe its not locking, if youi try scanning what happens ?
 
aliraza63

aliraza63

Senior Member
Messages
466
Ferret said:
62% is a little low maybe its not locking, if youi try scanning what happens ?
Click to expand...

in the sat finder it shows Locked
When I try to scan manuly it shows O channels found and same in auto . One thing i want to clear it doesnt show the Tuner failure msg . as u know if the tuner is faulty then this msg is must to come out . 2nd i have read on other forums same issues i have find out its driver problem may be which is not properly fixing the bug .
Ok I ask u . as we often do the software to generel non linux base receiver if there we find this type of error we mostly update the receivers whole flash like with seriel port
do u think this trick can work over here
if yes then Clones which factory software is available here i mean like Gp 5.1 or something
 
Ferret

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,543
Are you using a current satellite.xml to scan with ?

Clones have had no real updates in over 12 month. What you have is all you can have no updates other than updating the satellite.xml to scan with.

If you use channel settings for those sats do you then see any channels ?
 
aliraza63

aliraza63

Senior Member
Messages
466
Ferret said:
Are you using a current satellite.xml to scan with ?

Clones have had no real updates in over 12 month. What you have is all you can have no updates other than updating the satellite.xml to scan with.

If you use channel settings for those sats do you then see any channels ?
Click to expand...

Yes I use Satellite Xml setting to update sat and Tps
Now I tell u one thing Which have found and have fixed now
I updated the image PLI as u advised me But it was not working now what i have done
1. I used the Dream 1.3.3.3.9
2. first send the ssl84b
3. Without restart i send it again the Pli image (ur sent link image)
4.after successfull update i restarted the box
again search the channels its works and stored ABS 75 61 channels .
5. I update latest satelite xml list and Now rescaned the ABS it working fine like before no error no signal drops
It seems problem solved but still i need to check it via DiseqC . I m going over to my house 's roof I will surelly inform u whats new . But seems with ur great help i have fixed the problem . let me attach Diseq C swtich Be right Back .
 
Ferret

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,543
Ok so i told you previously you need to flash the 84b ssl before the image ?

Those images you have linked to are for original boxes not clones.
 
aliraza63

aliraza63

Senior Member
Messages
466
Dear Friend
Is there any Pli or any other image available which should have TS panel . Mostly the images dont show TS Panel in Menu . I want to use this image due to easy access of the addons and cams installed .
 
Ferret

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,543
Cams on Pli are easy

Press Menu-plugins then the green button

Youll find cams there, the tspanel can be installed on any image.
 
Ferret

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,543
Tspanel gives a error ?

What is the error it gives ?
 
aliraza63

aliraza63

Senior Member
Messages
466
It shows an error " Some plugins missing TS Panel not present and then reboot it self with green page and after restart stops cams
 
Ferret

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,543
Try remove it with DCC then re install.

What version did you install ?
 
aliraza63

aliraza63

Senior Member
Messages
466
Ferret said:
Try remove it with DCC then re install.

What version did you install ?
Click to expand...
This version of Pli OpenPLi-2.1-beta-dm800-20120816-sim201-ssl84b.nfi

Cureently i have installed this
Sat4Fun-GP3-07-07-2012-sim2-SSL-84b.nfi
after 2 hours of usage it seems this is not much better hangs the channels after 20 mints it seems its a dump version number of things already installed
 
Last edited:
J

JUVERUI

Member
Messages
77
yes my friend put the last tspanel in /temp and go to menu/system/softwaremanager/install package manual, and it's ok


regards
 
Ferret

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,543
Yes you can install the IPK version in DCC

Tools-Packages and select the file

Then reboot.
 
aliraza63

aliraza63

Senior Member
Messages
466
Dear Friend Ferret
Yesterday day I bought a new Rev M Tuner and replaced it But My box is resatarting it self just dont dont go to boot . even the tuner was sealed packed and i have opened it my self . its new tuner . I have changed the image also with Nemsis but it still doing this . when i attach old tuner it works fine . can u help me in this matter thanks
 
aliraza63

aliraza63

Senior Member
Messages
466
Thanks
it takes 4 or 5 restart then works and go to boot whats this
 
Last edited:
You must log in or register to reply here.
Top