vplug general discussion no keys and files here

Lida

Registered
Messages
63
Hello!
guys how to get through the installation of vPlug2.4.6_setup

-88693455.jpg
 

milan58

Super VIP
Messages
1,646
On Disk C, create a folder called App.Extract from WinRAR into App.You can then copy from the app folder to the plugins folder.
 

alanisrox69

Registered
Messages
28
Hi all, I did a stupid thing tonight. I pasted the wrong CW for a feed in Vplug in TSReader, the PIDs showed green so I thought all was well and recorded the mux. Well, it was the wrong CW. I tried to use tsdec to decrypt the recorded file but it didn't work.

Is there any way to fix the file? I have the RIGHT CW now, but I pasted the WRONG one in vplug while it recorded.

here's paste from Vplug log file:
Code:
4/3/2018 7:13:17 PM] - TSReaderPro2, 8, 0, 47:Turner 1A - freq=0, tp_id=$0000, SID=$0001, PMT=$0800
[4/3/2018 7:13:17 PM] - TSReaderPro2, 8, 0, 47:Turner 1A - Cached ECM-PID:0($0000)
[4/3/2018 7:13:17 PM] - TSReaderPro2, 8, 0, 47:Turner 1A - Added PMT filter, pid=$0800
[4/3/2018 7:13:17 PM] - TSReaderPro2, 8, 0, 47:Turner 1A - BISS System key_in_use= 
[4/3/2018 19:14:09] - TSReaderPro2, 8, 0, 47:Turner 1A - Change in files has been detected.
[4/3/2018 19:14:09] - TSReaderPro2, 8, 0, 47:Turner 1A - No. of keys in v_keys.db: 542
[4/3/2018 19:14:09] - TSReaderPro2, 8, 0, 47:Turner 1A - No. of rows in v_sids.db: 4239
[4/3/2018 19:15:54] - TSReaderPro2, 8, 0, 47:Turner 1A - Added Turner 1A DCW: EEC26BC1C484AEF1EEC26BC1C484AEF1
[4/3/2018 19:15:54] - TSReaderPro2, 8, 0, 47:Turner 1A - No. of rows in v_sids.db: 4239
[4/3/2018 19:15:54] - TSReaderPro2, 8, 0, 47:Turner 1A - Sending DCW: EEC26BC1C484AEF1EEC26BC1C484AEF1
[4/3/2018 19:16:09] - TSReaderPro2, 8, 0, 47:Turner 1A - Change in files has been detected.

any help appreciated. Thanks!
 

lazezo

Registered
Messages
62
Hi all
16E
SIC Internacional /biss
ALB-007 RTSH /biss
both of them have the same provider!!!
if i enter the key for first channel it will work
but second channel will not!
if i enter the key for second channel it will work
but first channel will not!
i made one key as 00 and the other as 01
but the channel that it's key at 00 will work and the other will not !!
Any help??

 

DEPORTIVO

Registered
Messages
289
Hi guys,
4K feed
When I put biss key - vplug writes about the inadequate v_keys.db and v_sids.db !!!
Any help ???
Other feeds and keys are OK.
 
Top