Vplug plugin issues ..with ProgDVB

[barney115]

ive been using ProgDVB for quite a while now
This Version on my link thnxs to serkanguzel => http://www.sat-universe.com/showpost.php?p=1162059&postcount=12

i have TBS 5980 USB QBOX Single Tuner

and i have Biss Plugin 1.0 and Vplug plugin working fine and decoding no problem ,

i usually must insert [ Biss ] keys for various Feeds and no issues there but ..
some feeds use same key all the time like MGM 10e for example ,
and i can clear this and others just fine but my question is how do i save or Store and save keys with Vplug plugin ??

when i switch channel i then must manually keep entering key all the time over and over

can someone plze try explain and help me overcome this issue i have plze as its drive me nuts :mecry:

thnxs for any help it will be appreciated .
-
Barney2222

 

[Brummie]

I am no expert on these I could not get vplug working either but I have no probs with NWemu1.2.8 pasting the keys into it

 

[barney115]

Its not really that Vplug dont work its just i dont know howto Save Keys so every time i change channel basically i have to manually insert same key again and again etc..

 

[Brummie]

with NWemu1.2.8 I just right click in the in the active key box and it gives you an option I just paste the key there and don't have any probs

 

[gotya]

Hello barney2222

you remind me with the old time

there is no problem mate

I made the pic a bit bigger to make the details clear

you have 2 choices in vplug to store the key whether in v_keys.db or v_sids.db

notice in v_keys.db you only can save one ProvidrID no more

where v_sids.db is made for BISS keys

the fastest way to save the key in v_keys.db file is by editing the 00 key

like this

another way see the pictures to show you where the keys saved in v_keys.db file by searching the ProviderID just to make it more clear

========================================

an here is the easiest way to save BISS key in v_sids file

follow the steps

finally close the Prog DVB player and restart it again so the keys will be setted :thum:

and see now where the key was saved

regards

 

[barney115]

Wow!! That is one totally awesome post
i was kinda thinking this could be the soloution as you describe MaRwAn26 but i was a little afraid to do as you say incase i messed something up badly but now i know for sure with your easy to follow guide you make it so simple
and have shown me a few extra tips that i did not know just by looking at your pics .
Thank you so very much for this post its pure quality
and exactly what i was looking for aswell .
i will mess about in next few days and experiment with what you have shown me now .
many thnxs once again MaRwAn26 just fantastic my friend : )

 

[gotya]

you're welcome m8

and nothing will be missed my friend

the post is still in the forum and you could save it in your PC

I put all the pictures in one compressed file just incase

regards

 

[barney115]

Thank you ive already tested on some Biss channels on 10e and yes i confirm your method works great : )
many thanks MaRwAn26

 

[plachta]

Yes, for a long time so I use this editor for BISS and softcamkey, but it can also be used for Viaccess,Cryptoworks or systems using known algorithms.

 

[arbitragio]

help me

Can you give a quck guide how to install NWemu in prog dvb?

 

[ooOO_SORGOS_OOoo]

Nwemu
C:/progdvb/plugins/nwemu.dll and nwemu.ini vmodules and other folders

 

[qinqin]

Today the feed WWE and tennis is encrypted by biss and I use vPlug

This is tennis


This is WWE


When I add WWE and tennis key,it only can watch one channel.The first key is replaced by another key.

What should I do?

 

[qinqin]

I added key, but when I reopen SmartDVB the key is disappered.:mecry::mecry:
I

 

[dahaka]

I added key, but when I reopen SmartDVB the key is disappered.:mecry::mecry:
I

Is img asia channel appears as free channel during frequency scan ?

 

[qinqin]

Is img asia channel appears as free channel during frequency scan ?

No BISS encryption

 

[dahaka]

No BISS encryption

Right click on the channel and select properties
From conditional access select add
caid 2600
ecm 1FFF
press OK

Check the conditional access box
Press apply & reload then press OK

The channel will work and vplug save the key .

 

[dahaka]

Add screen shot for ERT channel at 3E (its the same problem like yours)

Right click on the channel and select properties
From conditional access select add
caid 2600
ecm 1FFF
press OK

Check the conditional access box
Press apply & reload then press OK

The channel will work and vplug save the key .