[Tutorial] Install oscam on OpenATV

anwar saheb

Registered
Messages
632
[global]
logfile = /home/root/logs/oscam.log
unlockparental = 1
nice = -1
maxlogsize = 2048
waitforcards_extra_delay = 3000
dropdups = 1
emmlogdir = /home/root/logs/
lb_mode = 1

[dvbapi]
enabled = 1
au = 1
user = dvbapiau
boxtype = dreambox

[webif]
httpport = 8080
httphelplang = de
httprefresh = 30
httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255,10.0.0.0-10.255.255.255
hideclient_to = 15
 

anwar saheb

Registered
Messages
632
Unable to connect

Firefox can't establish a connection to the server at 10.0.0.8:16001.

The site could be temporarily unavailable or too busy. Try again in a few moments.
If you are unable to load any pages, check your computer's network connection.
If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
 

anwar saheb

Registered
Messages
632
openatv config
[webif]
httpport = 16001
#httpuser = root
#httppwd = oscam
httprefresh = 20
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httphideidleclients = 1
httpreadonly = 0
 

barns

Registered
Messages
720
hi friends the link to download [softcam feed wetek_1.0_all.ipk] here and copy it on a USB stick.ist douwn
:-(
 

detox1978

Registered
Messages
3
Hi All,

I picked up a Wetek Play last weekend and trying to setup OSCam.

I've installed OpenATV onto an SD Card and followed the guide in this thread to install OSCam, which appears to be running (green light). When I browse to http://[wetek-ip]:16001 it returns ERR_CONNECTION_REFUSED

How do I allow my local subnet to browse the web interface?

I can access OpenWebif on http://[wetek-ip]:80

Many thanks
 
Last edited:

detox1978

Registered
Messages
3
Hi All,

I picked up a Wetek Play last weekend and trying to setup OSCam.

I've installed OpenATV onto an SD Card and followed the guide in this thread to install OSCam, which appears to be running (green light). When I browse to http://[wetek-ip]:16001 it returns ERR_CONNECTION_REFUSED

How do I allow my local subnet to browse the web interface?

I can access OpenWebif on http://[wetek-ip]:80

Many thanks


Sorted it by manually installing oscam 10660
 

SapoCocas91

Registered
Messages
1
Hello!

I've got the openatv 6.0 version installed on a wetek play 2, and it's working, but when I select oscam 10660 a press Start to activate it, it always stays off, showing "no CAM 1 active". What am I doing wrong?
 
Top