A fairly complete version of the workbook for Qbox one some configurations may vary depending on the image you use, but those principles are clear and detailed
More attention should be the configuration for entry into the network through a Wi - Fi connection
first step :
select enable wi-fi interface then put the IP of the Qbox ( it's the same of that of modem or router just the last number must be change on your choice generally by 2 numbers like .1 = .10 or .100 ) ; the voice addressing type must be static IP , then netmask , gateway ( the IP of your router or modem ) , dns the same IP of gateway
like this
Now start scan SSID
if the connection is encrypted select encryption and write the key in the appropriate codify ( WEP / WPA ... )
Now again scan SSID and if the parameters are correct the Qbox is connected