oscam_emu_icam_patch

SAT_Nobody

Member
Messages
171
Hi @ juli13, thanks for this patch.

but where put oscam_emu_icam_patch and howto

thanks
 

fatmiri

New member
Messages
10
where should we put this file thank you ?
 

juli13

Staff member
Administrator
Messages
10,097
This patch is only for those who compile oscam
 

SAT_Nobody

Member
Messages
171
where should we put this file thank you ?
@ barney115

thats what i ask too

ok but why you not compile this oscam?
 

AbouRayene

New member
Messages
8
did this patch work without stream delay or still we have to use this option please
 

juli13

Staff member
Administrator
Messages
10,097
the patch works with stream relay , but I suggest useing the original oscam icam file, wich is more stable
 

liaqatali

New member
Messages
21
thank you for explane
 

AbouRayene

New member
Messages
8
the patch works with stream relay , but I suggest useing the original oscam icam file, wich is more stable
thx juli
i tested it with new 11714 patched with your patch works very well
 

Petar120

New member
Messages
22
the patch works with stream relay , but I suggest useing the original oscam icam file, wich is more stable
Hi.
Do You maybe know or anybody is it possible to find/get oscam 11.711 icam source code?
 

juli13

Staff member
Administrator
Messages
10,097
Hi.
Do You maybe know or anybody is it possible to find/get oscam 11.711 icam source code?
the source code of 11711 with icam is not public.

The icam patch is done by reverse engenering, is close to the original icam patch.
 

jdavid22

Member
Messages
126
the source code of 11711 with icam is not public.

The icam patch is done by reverse engenering, is close to the original icam patch.
the patch, only works for those who have ps or is it for receivers with a local card?
 

juli13

Staff member
Administrator
Messages
10,097
the patch, only works for those who have ps or is it for receivers with a local card?
The patch works for who have a *s, i prefer the original oscam icam.

i do not have a local card to try it, it is sayed that works but you must have the K1 key, without it does nothing.
 

jdavid22

Member
Messages
126
The patch works for who have a *s, i prefer the original oscam icam.

i do not have a local card to try it, it is sayed that works but you must have the K1 key, without it does nothing.
I only have my card paid... how difficult is it to have k1?
 

juli13

Staff member
Administrator
Messages
10,097
I only have my card paid... how difficult is it to have k1?
It is a engenering proces extracting the key from the chip
 

juli13

Staff member
Administrator
Messages
10,097
here is the oscam 11714 emu with icam

 

samur

New member
Messages
6
the source code of 11711 with icam is not public.

The icam patch is done by reverse engenering, is close to the original icam patch.
no one can guarantee or confirm what you say ?
(..???)
:ninja:
;
 

juli13

Staff member
Administrator
Messages
10,097
It is sayed by the creator of that patch
 

juli13

Staff member
Administrator
Messages
10,097
Try the new oscam icam with run by dvbapi


since the setting Add ecm in stream is off, now the stream relay should work in vti, newnigma and other no openOE images.
 

milan-

New member
Messages
8
Hi!
I have an error. I use openatv 7.1, use a last Oscam 11714. I put the config
[streamrelay]
stream_ecm_delay = 0
stream_relay_ctab = 098D

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
delayer = 60
user = dvbapiau
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2
boxtype = dreambox

And in menu setup usage/gui custumize system setting: i put this settings
include ecm in http yes
Unscramble http no
Unscramble reciver no
But the screen is black. When put in the sky icam not show nothing, no ecm.

Please can help me.
Can unpload the right config and the right setting to put in etc/enigma2.

Thank you very much
 
Top