openATV SoftCam Feed

Status
Not open for further replies.

Brummie

Staff member
Administrator
Messages
5,794
openATV SoftCam Feed
unzip and ftp the ipk file to tmp then go to setup/software manager and install local extension and install it
 

[email protected]

Staff member
Super Moderator
Messages
22,368
Softcam feed 2.0 for OpenATV
 

[email protected]

Staff member
Super Moderator
Messages
22,368
New and improved Softcam Panel feed 3.0 & CCcam 2.3.2 (Mips & ARM) & OScam for the OpenATV.

Installation:
1.Extract,
2.Copy the softcam-feed-mipsel_x.x_all.ipk to "TMP" on your STB via FTP,
3.Set Now on your STB press the Blue botton on the remote and go to Plugins » IPK Installer » Memory /tmp » Intall Extensions » Select:
4.softcam-feed-mipsel_x.x_all.ipk
5.and press the Green Button,
6.Now go to the start, press the Blue Button and now you have the Softcam Panel were you can install and manage your softcams,

info: all the tools that you need to install the softcam are included with the package (DDCE2 and VUCC).

OScam v.11392 for MIPS
DOWNLOAD
OScam v.11392 for ARM V7
DOWNLOAD
 

maumixio

Staff member
Moderator
Messages
2,766
OpenATV Softcam zdroj Universal_3.0_all_ (2018) .rar
after downloading the archive error


UR right this is zipped... works with winrar too. 1st file with programs included, 2nd only ipk for addon
 

[email protected]

Staff member
Super Moderator
Messages
22,368
Softcam Feed for OpenATV (as of May 2019)

Installation instructions

Package name: softcam-feed-universal_6.Plus_all.ipk
Name: softcam-feed-universal 6 Plus
Supported Images: openATV Images 6.1 or newer, min release : 2019.05.01
Older Images are not supported!

Changes:
-Added support for OpenPli Cam Starter (/etc/initd)
-Fixed download issues
-There is no longer a restart required after installation

Installation:
1) Copy softcam-feed-universal_6.Plus_all.ipk to a USB stick
2) Connect the USB stick to your E2 receiver and follow the instructions.
3) Select the Softcam feed with "OK" and press the green button to start the installation
4) Open the plugin browser and press green to install a Softcam
5) After installation, press Menu and open Info Panel check for Softcam-Setup
5.1) After the Gui restart you will find it under Decryption and Parental Control
6) Using Softcam Setup you can take control which installed softcam is used as Softcam or Cardserver

Configure your Softcam
The location for config files moved to enigma2 image default - /etc/tuxbox/config/ .

The old location /usr/keys/ is no longer supported.
 

[email protected]

Staff member
Super Moderator
Messages
22,368
softcam-feed-universal_4.3-r0_all.ipk
 

[email protected]

Staff member
Super Moderator
Messages
22,368
softcam-feed-universal_4.3-r2_all.ipk

Softcam Feed for OpenATV (mipsel/arm) (Stand 12.06.19)

Installation of the secret/softcam feed

Option A:

The easiest method of getting a shell session to the box is the "Terminal" in OpenWebif, but feel free to use puTTy or whatever you already use.
That one-liner makes sure you get the latest version of the feed for your actual image version and architecture.
No need to download the IPK, copy it to the box and installing it through GUI or shell when using the one-liner but you are still free to use an IPK, if you insist on it.

Use version 4.3r2 or later in that case.

The new feed supports OpenATV 5.3 through 6.3, that is "the last 5 versions of OpenATV".

Code:
wget -O - -q http://updates.mynonpublic.com/oea/feed | bash

Option B:
Transfer ipk to /tmp
On receiver, press
Menu > Setup > Software management > Install local extension > OK
Select /tmp/ and press OK
Click OK to Install extensions
List of ipks will be shown.
Select the one you want. Ensure it has a tick by pressing OK then press Green to install

Option C:

Transfer ipk to USB stick
Ensure that no menus are showing on TV
Insert USB stick, you will be prompted to install ipks
List of ipks will be shown.
Select the one you want. Ensure it has a tick by pressing OK then press Green to install

Stage 2: install softcams
Once you install the softcam feed, restart the receiver.
To install softcams:
Menu > Plugins > Green (download plugins) > scroll to softcams and press OK> Select the one you want and complete installation
To avoid issues, restart receiver

Stage 3: Edit/transfer your config files
The softcams on the softcam feed use the following locations for config files
mgcamd in /usr/keys (same as before as well as other images)
CCcam in /etc (now same as other images)
OsCam in /etc/tuxbox/config/oscam-xxxx (now same as other images)

Stage 4: Activate/control Softcams
Red > Softcam setup
or
Menu > Setup > Decryption and Parental control > Softcam Setup

Note: The above menu may not show until the receiver is restarted following installation of a softcam. This is because the menu checks for a softcam before it becomes visible.
 

[email protected]

Staff member
Super Moderator
Messages
22,368
softcam-feed-universal_4.3-r3_all.ipk

Softcam Feed for OpenATV (mipsel/arm)
 

[email protected]

Staff member
Super Moderator
Messages
22,368
softcam-feed-universal_4.3-r4_all.ipk

Softcam Feed for OpenATV (for all architectures​ supported by OpenATV )

-Fixes installation on OpenATV 5.3
 

[email protected]

Staff member
Super Moderator
Messages
22,368
softcam-feed-universal_4.5-r0_all.ipk

Softcam Feed for OpenATV (mipsel/arm/aarch64/sh4) (Stand 30.06.2020)
For all architectures​ supported by OpenATV

-fixes for Python3 so that it can support OpenATV 6.5
 

[email protected]

Staff member
Super Moderator
Messages
22,368
softcam-feed-universal_4.7-r0_all.ipk

Softcam Feed for OpenATV (mipsel/arm/aarch64/sh4)
For all architectures supported by OpenATV
 

Attachments

  • softcam-feed-universal_4.7-r0_all.ipk
    2 KB · Views: 156
Status
Not open for further replies.
Top