Latest Version of BootPlus for Cuberevo

[MIKAME]

BootPlus for Cuberevo v.1.0

Plugin per impostare il multiboot  semplicemente da telecomando.
Scegliete il tasto appropriato del telecomando da impostare, il device  (in genere sdb se si ha disco), su quale partizione è installato il  nuovo firmware, il firmware (enigma2 o dgs) e il supporto (flash, usb,  sata se disco interno). Premete ok e riavviate da telecomando.
 
Attenzione questo plugin non funziona, per ora, con le versioni flash di  Tideglo, occorre la presenza del file /etc/fw_env.config. 
 
 Nella  Extreme Edition basta scaricarla dagli addon - extra  e riavviare  Enigma2.
 
  Per le altre versioni installare il pacchetto  allegato col comando 
ipkg install /tmp/BootPlus_1-0-r1_sh4.ipk 
avendo premura di trasferire il file ipk allegato nella cartella /tmp. 
Inoltre vi allego il file fw_env.config che va necessariamente inserito in /etc
 
buon divertimento
 
 
 
==================================================  =====
 BootPlus for Cuberevo v.1.0
 
 Plugin to simply set   Multiboot environment from panel.
Choose the appropriate button of the remote control,  the device  (usually sdb if you have disc),  choose in which partition you installed  the new firmware,  the firmware (dgs or enigma2) and support (FLASH,  USB or SATA if you have hard internal drive) . Press OK and restart with  remote control button.
 
Remember that this plugin does not work, for now, with flash versions of  Tideglo, because the file fw_env.config must be present in /etc.
 
 In the Extreme  Edition just download the addon - extra and restart Enigma2 and it is  ready to use.
 
For other versions of E2 install the attached file with the command
ipkg install / tmp/BootPlus_1-0-r1_sh4.ipk 
taking care to transfer the ipk file attached in /tmp. 
Also I am attaching the file fw_env.config which necessarily has to be  in /etc 
 
 enjoy it.

 

[k@lkov]

BootPlus for Cuberevo v.2.0

[B]changelog:[/B]
-option optimization
-ide support
-nfs support
-display all boot env
-display boot env related to remote key
-save own boot env configuration
-reload own boot env configuration
-setenv, printenv in /var

Plugin to simply set Multiboot environment from panel.
Choose the appropriate button of the remote control, the device (usually 
sdb if you have disc), choose in which partition you installed the new 
firmware, the firmware (dgs or enigma2) and support (FLASH, USB or 
IDE, SATA, NFS) . Press OK and restart with remote control button.

In the Extreme Edition just download the addon - plugins and restart 
Enigma2 and it is ready to use. Remove V1 before if it exists

For other versions of E2 install the attached file with the command
ipkg install / tmp/BootPlusV2_2-0-r1_sh4.ipk taking care to transfer 
the ipk file attached in /tmp. Restart E2..

enjoy it.

Use at your own risk.

ciaooooo

 

[grizzlyt]

BootPlus for Cuberevo v.2.1

BootPlus for Cuberevo v.2.1

v.2.1
* fixed DGS boot address flash and usb
* rootdelay selectable

Plugin to simply set Multiboot environment from panel.
Choose the appropriate button of the remote control, the device (usually sdb if you have disc), choose in which partition you installed the new firmware, the firmware (dgs or enigma2) and support (FLASH, USB or IDE, SATA, NFS) . Press OK and restart with remote control button.

In the Extreme Edition just download the addon - plugins and restart Enigma2 and it is ready to use. Remove old version before if it exists

For other versions of E2 install the attached file with the command
ipkg install / tmp/BootPlusV2.1_2-1-r1_sh4.ipk taking care to transfer the ipk file attached in /tmp.
Restart E2..

enjoy it.

Use at your own risk.

ciaooooo

Thanks IP2008

BootPlusV2.1_2-1-r1_sh4

 

[tani1]

BootPlus for Cuberevo v.2.2

Changelog:
-fixed boot address for flash and usb version
-rootdelay default = 10
-menu icon
-fix display remote key

 

[juli13]

BootPlus for Cuberevo v.2.3

v.2.3
-vdr support


Plugin to simply set Multiboot environment from panel.
Choose the appropriate button of the remote control, the device (usually sdb if you have disc), choose in which partition you installed the new firmware, the firmware (dgs, enigma1/enigma2/neutrino, vdr) and support (FLASH, USB or IDE, SATA, NFS) . Press OK and restart with remote control button.

In the Extreme Edition just download the addon - plugins and restart Enigma2 and it is ready to use. Remove old version before if it exists

For other versions of E2 install the attached file with the command
ipkg install / tmp/BootPlusV2.3_2-3-r1_sh4.ipk taking care to transfer the ipk file attached in /tmp. 
Restart E2..